Download United States Department of the Army Cisco Past Performance

United States Department of the Army
Cisco Past Performance
Prepared for:
United States Department of the Army
Contract Number: W15P7T-08-P-D258
Submitted by:
Exalt Integrated Technologies, LLC
3000 Northwoods Pkwy, Suite 350
Norcross, Georgia 30071
This proposal includes data that shall not be disclosed outside of FTC and shall not be duplicated, used, or disclosed, in whole or in part, for any
purpose other than to evaluate this proposal. If, however, a contract is awarded to Exalt, FTC shall have the right to duplicate, use, or disclose
the data to the extent provided in the resulting contract.
All pages of this proposal are subject to this restriction.
Company/Agency Name: United States Department of the Army, Contract Number: W15P7T-08-PD258, POC: Mike Milillo, [email protected], 732-532-5655 voice, Contract Value:
$393,907.30. This contract was followed up with an additional contract (W15P7T-09-P-D252,
$28,380.00) to perform Cisco Training in the Czech Republic.
Overview: Exalt Integrated Technologies LLC (Exalt) has provided Cisco Training and Cisco Systems
Infrastructure products to the U.S. Army.
Cisco Training performed:
ICND1&2 (Interconnecting Cisco Networking Devices Part 1 & 2)
This course focuses on providing the skills and knowledge necessary to install, operate, and troubleshoot
a small branch office Enterprise network, including configuring a switch, a router, and connecting to a
WAN and implementing network security. A Student should be able to complete configuration and
implementation of a small branch office network under supervision.
Course Objectives
Upon completion of this course, you should be able to:






Describe how networks function, identifying major components, function of network components
and the Open System Interconnection (OSI) reference model.
Using the host-to-host packet delivery process, describe issues related to increasing traffic on an
Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues.
Describes the reasons for extending the reach of a LAN and the methods that can be used with a
focus on RF wireless access.
Describes the reasons for connecting networks with routers and how routed networks transmit
data through networks using TCP/IP.
Describe the function of Wide Area Networks (WANs), the major devices of WANs, and
configure PPP encapsulation, static and dynamic routing, PAT and RIP routing.
Use the command-line interface to discover neighbors on the network and managing the router¿s
startup and configuration .
ICND1 Goal: Upon completing the ICND1 course, the student should have the knowledge and skills
necessary to install, operate, and troubleshoot a small branch office enterprise network, including
configuring a switch, a router, and connecting to a WAN and implementing network security. A student
should be able to complete configuration and implementation of a small branch office network under
supervision.
Page 2
Copyright ©2015 Exalt Integrated Technologies LLC, Inc., All Rights Reserved
Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal
Scope: Exalt has delivered the following equipment to the U.S. Army:
1
2
3
4
5
6
7
8
9
10
11
3845 w/DC PWR, 2GE,1 SFP, 4 NME, 4HWIC, IP Base, 64F/256D-1
Cisco 3845 IP VOICE-2
1 16 port 10/100 EtherSwitch NM with prestandard POE-3
2 WAN Card Slot Network Module(no LAN)-4
IP Communications High-Density Digital Voice NM with 1 T1/E1-5
2-Port Async/Sync Serial WAN Interface Card-6
2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - G.703-7
64-Channel Packet Voice/Fax DSP Module-8
Cisco CallManager Express Feat License Up To 144 Phones-9
CD for SDM software-10
1 Power daughtercard for 16 port Etherswitch NM-11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
CISCO3845 DC factory upgrade upgrade option power supply-12
256BM SDRAM default memory for 3800-13
64MB Cisco 3800 Compact Flash Memory Default-14
3845 w/DC PWR, 2GE,1 SFP, 4 NME, 4HWIC, IP Base, 64F/256D-15
Cisco 3845 IP VOICE-16
1 16 port 10/100 EtherSwitch NM with prestandard POE-17e
2 WAN Card Slot Network Module(no LAN)-18
IP Communications High-Density Digital Voice NM with 1 T1/E1-19
2-Port Async/Sync Serial WAN Interface Card-20
2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - G.703-21
64-Channel Packet Voice/Fax DSP Module-22
Cisco CallManager Express Feat License Up To 144 Phones-23
CD for SDM software-24
1 Power daughtercard for 16 port Etherswitch NM-25
CISCO3845 DC factory upgrade upgrade option power supply-26
256BM SDRAM default memory for 3800-27
64MB Cisco 3800 Compact Flash Memory Default-28
2811 w/ DC PWR,2FE,4HWICs,2PVDMs,1NME,2AIMS,IP BASE,64F/256D-29
Cisco 2800 IP VOICE-30
32-Channel Packet Voice/Fax DSP Module-31
9-Port Ethernet Switch HWIC with Power Over Ethernet-32
Page 3
Copyright ©2015 Exalt Integrated Technologies LLC, Inc., All Rights Reserved
Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal
33
34
35
36
37
38
39
2-Port Async/Sync Serial WAN Interface Card-33
Cisco Call Manager Express Feat License For Up To 24 Users-34
CD for SDM software-35
256MB DDR DRAM Memory factory default for the Cisco 2800-36
64MB CF default for Cisco 2800 Series-37
Cisco 2811 DC power supply-38
CISCO IP PHONE 7960G SP BUNDLE BUILD FOR HARSH ENVIRONMENTS
Line Comment: CALL MANAGER USER LICENSE INCLUDED
Page 4
Copyright ©2015 Exalt Integrated Technologies LLC, Inc., All Rights Reserved
Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal