Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Blue rectangles are links to other catalog pages. ELECTRO-PROPORTIONAL VALVES—FLOW CONTROLS PV70-35 Proportional Flow Control Cartridge, DESCRIPTION A linear solenoid-driven, two-way normally open, screw-in cartridge valve designed for use with a pressure compensator to function as an electrically stroked variable flow regulator. OPERATION With increasing electric current, the PV70-35 changes from full open to full closed with flow from port ➁ to port ➂. Port ➀ is used only to pressure balance the spool and should be plugged. The proportional valve is intended to function in tandem with standard HydraForce pressure compensators at pressure differentials of 21 bar (300 psid) or less, or alone in variable volume pressure-compensated circuits with load sense capability. The valve is designed to work with industry-common controllers which typically feature current capability to 2 amps @ 12 VDC, PWM, and start/stop trim adjustments (I min./I max.). Consult factory for details and potential sourcing. Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to reach start point. Continue another approximately 5 turns to full shift. To Disengage: Turn counterclockwise approximately 6 turns to positive stop. 3 2 1 FEATURES • Excellent linearity and hysteresis. • Optional control orifice sizes. • Hardened spool and cage for long life. • Optional coil voltages and terminations. • Efficient wet armature construction. SYMBOLS USASI/ISO: 3 RATINGS 1 Operating Pressure: 207 bar (3000 psi) Internal Leakage: 197 cc/min. (12 cu. in./min.) fully closed at 207 bar (3000 psi) Electrical: 2 standard voltage ratings 2 Coil Voltage 12 VDC 24 VDC PERFORMANCE PRESSURE DROP bar/psi • Cartridges voltage interchangeable. • Unitized, molded coil design. • Coil waterproofing standard. • Manual override option. 20.7/300 ➂ to ➁ Coil De-energized Through Cartridge & Ported Body 32 cSt/150 ssu oil at 40°C Note: Port ➀ is not used. 17.2/250 C 13.8/200 B A 10.3/150 Threshold Current 300 ± 200 mA 150 ± 100 mA Max. Control Current 1500 ± 200 mA 750 ± 50 mA Filtration: See page 9.010.1 Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1 Installation: No restrictions; See page 9.020.1. Cavity: VC10-3; See page 9.110.1; Cavity Tool: CT10-3X-XX; See page 8.600.1 Seal Kit: SK10-3X-MM; See page 8.650.1 for seal kit options and appropriate seals based on application temperature range. 6.9/100 3.4/50 7.5 2 15.1 22.7 30.2 37.9 4 6 8 10 FLOW lpm/gpm 2.432.1 45.4 53.0 12 14 Recommended Electronic Controllers: See page 2.001.1 or our Electronics catalog. ® HYDRAFORCE.com Blue rectangles are links to other catalog pages. HYDRAFORCE ® Normally Open PV70-35 DIMENSIONS MANUAL OVERRIDE OPTION "M" C I N FO R CE R A 1.25 31.8 X XX X 1.74 44.1 1.71 43.4 . XX 2.09 53.1 MANUAL OVERRIDE OPTION "G" HY D .67 17.0 0.87 22.1 1.86 47.2 1.25 31.8 2.50 63.5 1.06 27.0 ACROSS FLATS TORQUE: 10–12 ft-lbs (14–16 Nm) 3.37 85.6 INCH MILLIMETRE 2.70 68.6 0.74 18.8 1.81 46.0 1.13 28.6 ACROSS FLATS 3 TORQUE: 27 ft-lbs max. (36.7 Nm) 2 1 Port Plugs: For SAE 6 Port: Part No. 6103006 For SAE 8 Port: Part No. 6103008 See page 8.500.1 MATERIALS Cartridge: Weight: 0.19 kg. (0.42 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.36 kg. (0.80 lbs.) Anodized highstrength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ. See page 8.010.1 70-Size “D” Coil: Weight: 0.32 kg. (0.7 lbs.) Unitized thermoplastic encapsulated, Class H high temperature magnet-wire. See page 3.200.7. 70-Size “E” Coil: Weight: 0.41 kg. (0.9 lbs.) Fully encapsulated with rugged external metal shell. IP69K rated. See page 3.400.13. ® HYDRAFORCE.com 2.12 53.8 1.36 34.5 3 2 2.62 66.5 0.28 7.1 1 Plugged 0.25 6.4 2.00 50.8 TO ORDER PV70-35 __ __ - __ __ __ - __ - __ __ __ __ Flow Range Required. See A Performance B Curves. 0 6T 8T 2B 3B Option(s) None Manual Override Manual Override with Guard (Blank) M G Porting Cartridge Only SAE 6 SAE 8 1/4 in. BSP* 3/8 in. BSP* *BSP Body; U.K. Mfr. Only Seals Buna N (Std.) N Fluorocarbon V DS DG DL DL/W Terminations D-Coil Dual Spades DIN 43650 Leadwires (2) Leads w/Weatherpak® Connectors Terminations E-Coil IP69K Rated ER Deutsch DT04-2P EY Metri-Pack® 150 Coils with internal diode are available. Consult factory. Voltage 0 Less Coil 12 12 VDC 24 24 VDC 2.432.2