Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
SYSTEM MODEL #: DATE / / PROJECT TYPE CIRCULAR SYSTEM CIRCULAR LAMP SYSTEM SPECIFICATIONS System Model Number HH-ILS-CP40-5K HH-ILS-CDS40-5K HH-ILS-CP55-5K HH-ILS-CP70-5K HH-ILS-CDS70-5K Input Power (W) Rated Initial Lumens (LM) Efficacy (LM/W)* 40 Input current (Amp) 120V 277V 0.35 - 0.15 42 2800 - 3000 70 - 75 55 0.48 - 0.21 58 4125 - 4380 75 - 80 70 0.62 - 0.27 74 4900 - 5250 70 - 75 80 0.70 - 0.30 84 5600 - 6000 70 - 75 100 0.88 - 0.38 105 7500 - 8000 75 - 80 120 1.05 - 0.45 126 9000 - 9600 75 - 80 Watts Lumen Maintenance CRI (60Khrs) Color Temp. (Kelvin) Average Lamp Life (Hours) 2700K - 6500K (5K Standard Color) 100,000 HH-ILS-CP80-5K HH-ILS-CDS80-5K HH-ILS-CDC80-5K HH-ILS-CP100-5K HH-ILS-CDS100-5K HH-ILS-CDC100-5K HH-ILS-CP120-5K HH-ILS-CDS120-5K HH-ILS-CDC120-5K 70%-75% HH-ILS-CP150-5K HH-ILS-CDS150-5K 150 1.32 - 0.57 158 12000 - 12750 80 - 85 200 1.75 - 0.76 210 16000 - 17000 80 - 85 250 2.19 - 0.95 263 21250 - 22500 85 - 90 300 2.63 - 1.14 315 25500 - 27000 85 - 90 400 3.50 - 1.52 420 34000 - 36000 85 - 90 500 4.61 - 2.00 525 42500 - 45000 85 - 90 > 80 HH-ILS-CDC150-5K HH-ILS-CP200-5K HH-ILS-CDS200-5K HH-ILS-CDC200-5K HH-ILS-CP250-5K HH-ILS-CDS250-5K HH-ILS-CDC250-5K HH-ILS-CDS300-5K HH-ILS-CDC300-5K HH-ILS-CDS400-5K HH-ILS-CDC400-5K HH-ILS-CDS500-5K * NOTE: Bare Lamp specifications will vary from fixture test results; LM/W is based on tested Lamp Power. Reference "RELATIVE LUMEN OUTPUT CHART" and contact Fulham for proper Spectrophotocolormeter "Sphere" test procedures. SYSTEM ELECTRICAL SPECIFICATION COMMON TO ALL GENERATORS CERTIFICATIONS Input Voltage 120-277V EMI/RFI Compliance FCC Part 18-A Voltage Fluctuation Tolerance ±10% Sound Rating Class A Input Frequency 50/60 Hz Type 1 Outdoor Output Frequency <250K Hz Surge Protection** Yes (Reference hi-pot test footnote) THD < 10% Max. Remote Distance*** 7 ft. (84”) (Reference Wiring Footnote) Power Factor > 0.95 Wiring Plug-n-Play Connectors Constant Wattage Output <5% 150°C 600V (Lamp Wire Shielded) Case Temp. < 65°C Wire Rating Electrostatic Discharge (ESD) Operating Temp. Open Fixture 0°C to 50°C Operating Temp. Closed Fixture -20°C to 50°C E323972 IEC 61000-4-2:Class 4 Electrical Fast Transient/Burst(EFT) IEC 61000-4-4: Level 4 Surge Immunity IEC 61000-4-5: Class 4 **Surge Protection: Contact Fulham before conducting Hi-Pot test. ***Wiring: Do not modify wire type or length without contacting Fulham for assistance. Reference remote mount options chart for special factory order systems and wire extensions under Lamp Advanced Features. SYSTEM MODEL NUMBER EXAMPLE HH HH = HIGHHORSE ILS C ILS = INDUCTION LIGHTING SYSTEM C = CIRCULAR LAMP DC 200 SYSTEM WATTS DC = DIE CAST DS = DISC BALLAST P = PROFILE BALLAST 5K KELVIN TEMP. Specify Kelvin when ordering. 5K is standard stock color. V REMOTE MOUNT Reference Remote Mount Options Chart for Code. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-1-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE CIRCULAR SPECIFICATIONS CIRCULAR LAMP SYSTEM SPECIFICATIONS Lamp Type Circular/Tubular External Inductor Type Hybrid Fluores cent All Prim ary Ignition Low Frequency Inductor Coil Operating Temperature Range (Thermal Management) Induction Lam p Core Mounting Bas e 100°C - 130°C Am algam Lam p Tip Tem perature Range 55°C - 125°C Lam p Coil 160°C - 200°C Circular/Tubular Convection or Conduction Lamp Operation Color Tem perature Fluctuation <10% LPW Fluctuation <10% Lamp Kelvin Temperature Options Kelvin Tem perature (Standard) 5000K Lim ited Stock (call Fulham for availability) 3500K, 4000K Special Factory Order (call Fulham ) 2700K, 3000K, 6000K, 6500K Kelvin Color Tem perature Tolerance ±300K Cold Start and Operation Systems Operating Tem perature (Clos ed Fixture) -40°C Freezer Operation Only (Call Fulham for As s is tance) EMI Meets International Standard L Level FCC Non-Cons um er units Com pliant FCC 47-CFR Part 18 Vibration Tests The HighHors e Induction lam p is des igned to tolerate s hock and vibration that would be expected in typical applications s uch as pos t top, bridge, roadway underpas s or tunnel lighting. HighHors e Induction lam ps have been tes ted under the following conditions with no dam age: -Shock - Lam ps s ubjected to three (3) one-half wave s hocks of 10 m s duration at 20 g. -Vibration param eters adapted from ANSI C136.31-2001, Am erican National Standard for Roadway Lighting Equipm ent Lum inaire Vibration, Section 5, lum inaire vibration tes t. Start Freq. 5Hz Amplitude 1.5 G End Freq. 7.07107 Hz 10Hz 3.5 G 30Hz Sweep between 5 Hz and 30 Hz at 0.861654 Min/s weep (Linear) Duration: 100,000 cycles at 100% Total tes t tim e: 1:36:30 Care s hould be taken when m ounting ballas t to m inim ize vibration Amplitude 3.5 G 3.5G UV UV (bare lam p-les s with lens ) 5uw/cm 2 * LPW is related to the temperature of Amalgam and Kelvin Temperature to maintain >90% output. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-2-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE CIRCULAR SPECIFICATIONS CIRCULAR LAMP SYSTEM SPECIFICATIONS (Part II) Am algam Hg. Am algam Type High Quality Solid Pellet Am algam Chart Lamp Type C40W C55W C70W C80W C100W C120W C150W C200W C250W C300W C400W C500W Amalgam Type B B B B B B B C C C C C Weight/ PC (mg) 40 40 40 40 40 40 40 40 40 40 40 40 PCS 2 2 3 3 3 4 5 6 9 10 11 11 Total Weight (mg) 80 80 120 120 120 160 200 240 360 400 440 440 Content of Hg in % 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3 3 3 3 3 Pure HgOrientation Weight (mg) Lam p 2.8 2.8 4.2 4.2 4.2 5.6 7 7.2 10.8 12 13.2 13.2 Circular (Am algam Tube-Down Orientation) See page 4 Lam p Advanced Features • Ultra-High Life 100,000hr Rated Lam p Technology • Wide Range of Wattage Options 40W - 400W • Full Kelvin Color Range 2700-6500K • Ins tant Start • Flicker Free Operation • Frequency Power Tuned Wattage to Ballas t • High Quality Phos phor Blends • High CRI (Color Rendering Index) • High Quality Solid Am algam Pellet • Ultra-Low Mercury Content (Encaps ulated) • Pre-Wired Lam p Input Connector • Univers al Heat Sink Mounting • Alum inum Coil Shield (Non-Corros ive) • Com patible with Fulham Dim m ing Generators • Com patible with Motion and Light Sens or Line Controls MADE IN AMERICA The Office of Energy Efficiency and Renewable Energy (“EERE”) at the US Department of Energy (“DOE”) has recently issued guidance relating to the Buy American Provisions of the Recovery Act. EERE issued the attached (i) Guidance on Manufactured Goods and Substantial Transformation for Financial Assistance Awards on May 24, 2010 (“Guidance”) and (ii) Memorandum of Decision granting a waiver of Section 1605 for Induction Lamps and Generators on August 11, 2010 (“Waiver”). The Guidance and Waiver are applicable to projects receiving financial assistance under the Recovery Act and are in effect until further notice from the DOE. Applying the terms of the Waiver, Fulham’s induction lamps and generators are categorically exempt from the Buy American Provisions. Please use the matrix below in determining the applicability of the Buy American Provisions to the constituent parts provided by Fulham for New or Retrofit Induction Fixtures. Fulham Induction Lamps Exempt Under Waiver Fulham Induction Generators Exempt Under Waiver Fulham Retrofit Kit (Reflector and Mounting Kit only) Made in America The above determination does not apply to imported New or Retrofit Induction Fixtures (including the constituent housing, reflector, mounting kit and lens) supplied by customers or third parties. Each such item must be evaluated under the Recovery Act, Guidance and Waiver on a case by case basis by the customer or third party for compliance with the Buy American Provisions. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-3-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE LAMP ORIENTATION Amalgam Tube on the down side orientation for all possible lamp orientations. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-4-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE INRUSH / INDUCTANCE CIRCULAR SYSTEM INRUSH CURRENT System Model Number HH-ILS-CP40-5K Watts Voltage Inrush Current Inrush Period 40 120V 9.0A 600.0ìs System Model Number HH-ILS-CP70-5K 55 70 120V 120V 14.0A 14.0A 700.0ìs 700.0ìs 120V 14.0A 700.0ìs 277V 18.0A 500.0ìs 70 277V 27.0A 600.0ìs 80 277V 27.0A 600.0ìs 100 277V 27.0A 600.0ìs 120 277V 27.0A 600.0ìs 150 277V 32.0A 700.0ìs 200 277V 34.0A 800.0ìs 250 277V 35.0A 800.0ìs 300 277V 36.0A 830.0ìs 400 277V 39.0A 830.0ìs HH-ILS-CP100-5K 100 120V 14.0A 700.0ìs HH-ILS-CDS100-5K HH-ILS-CDC100-5K HH-ILS-CP120-5K 120 120V 14.0A 700.0ìs HH-ILS-CDS120-5K HH-ILS-CDC120-5K HH-ILS-CP150-5K HH-ILS-CP150-5K 150 120V 14.0A 850.0ìs HH-ILS-CDS150-5K As with all electronic equipment, Fulham Induction Systems have a peak current shortly after the mains is switched on; while this is a momentary condition it is important to calculate the total load during this peak current demand. It is advised to use C-type MCBs in lighting installations with electronic ballasts. If it is absolutely necessary to connect more than the specified maximum number of fixtures based on peak demand contact a Licensed Electrician and consider a relay in the wiring circuit to limit the number of activated fixtures at one time. HH-ILS-CDC150-5K HH-ILS-CDC150-5K HH-ILS-CP200-5K HH-ILS-CP200-5K 200 120V 16.0A 900.0ìs HH-ILS-CDS200-5K HH-ILS-CDC200-5K HH-ILS-CDC200-5K HH-ILS-CDS250-5K HH-ILS-CDS250-5K 250 120V 18.0A 900.0ìs HH-ILS-CP250-5K HH-ILS-CDC250-5K HH-ILS-CDC250-5K 300 120V 22.0A HH-ILS-CDS300-5K 900.0ìs HH-ILS-CDC300-5K HH-ILS-CDC300-5K HH-ILS-CDS400-5K 55 HH-ILS-CDC80-5K HH-ILS-CDC120-5K HH-ILS-CDS300-5K 500.0ìs HH-ILS-CDS80-5K HH-ILS-CP120-5K HH-ILS-CP250-5K 18.0A HH-ILS-CP80-5K 80 HH-ILS-CDC100-5K HH-ILS-CDS200-5K 277V HH-ILS-CDS70-5K HH-ILS-CP100-5K HH-ILS-CDS150-5K 40 HH-ILS-CP70-5K HH-ILS-CDC80-5K HH-ILS-CDS120-5K Inrush Period HH-ILS-CP55-5K HH-ILS-CP80-5K HH-ILS-CDS100-5K Inrush Current HH-ILS-CDS40-5K HH-ILS-CDS70-5K HH-ILS-CDS80-5K Voltage HH-ILS-CP40-5K HH-ILS-CDS40-5K HH-ILS-CP55-5K Watts 400 120V 25.0A HH-ILS-CDS400-5K 950.0ìs HH-ILS-CDC400-5K HH-ILS-CDC400-5K NOTE: ALWAYS CONSULT A LICENSED ELECTRICIAN BEFORE INSTALLING ANY ELECTRICAL DEVICE. CIRCULAR LAMP INDUCTANCE Coupler Value 40W 55W 70W 80W 100W 120W 150W 200W 250W 300W 400W L (Inductance) 600.0µH 600.0µH 760.0µH 680.0µH 600.0µH 760.0µH 530.0µH 650.0µH 700.0µH 650.0µH 650.0µH Windings (Turns) 16 16 18 17 16 18 15 16 13 12 12 Frequency 250khz Connected Method Ls Room Ambient 25°C All types of Inductance (Self/Mutual/Partial/Loop/Loop Mutual) are directly related to the number of magnetic fields around a conducter per amp of current; it requires special equipment to measure inductance. Fulham Retro-fit Engineering Services is equipped to measure and mitigate the effects of Inductance which ultimately can produce failure of the system when not considered in the design of an Induction fixture. All Fulham engineered systems are certified to operate properly relative to Inductance, Thermal, and overall fixture efficacy. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-5-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE REMOTE MOUNT CIRCULAR SYSTEM REMOTE MOUNT OPTION Standard Length (in-stock) Output Wire length: 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. HH-ILS-CP40-5K HH-ILS-CP40-5KV HH-ILS-CP40-5KW HH-ILS-CP40-5KX HH-ILS-CP40-5KY HH-ILS-CP40-5KZ HH-ILS-CP55-5K HH-ILS-CP55-5KV HH-ILS-CP55-5KW HH-ILS-CP55-5KX HH-ILS-CP55-5KY HH-ILS-CP55-5KZ HH-ILS-CP70-5K HH-ILS-CP70-5KV HH-ILS-CP70-5KW HH-ILS-CP70-5KX HH-ILS-CP70-5KY HH-ILS-CP70-5KZ HH-ILS-CP80-5K HH-ILS-CP80-5KV HH-ILS-CP80-5KW HH-ILS-CP80-5KX HH-ILS-CP80-5KY HH-ILS-CP80-5KZ HH-ILS-CDC80-5K HH-ILS-CDC80-5KV HH-ILS-CDC80-5KW HH-ILS-CDC80-5KX HH-ILS-CDC80-5KY HH-ILS-CDC80-5KZ HH-ILS-CP100-5K HH-ILS-CP100-5KV HH-ILS-CP100-5KW HH-ILS-CP100-5KX HH-ILS-CP100-5KY HH-ILS-CP100-5KZ HH-ILS-CDC100-5K HH-ILS-CDC100-5KV HH-ILS-CDC100-5KW HH-ILS-CDC100-5KX HH-ILS-CDC100-5KY HH-ILS-CDC100-5KZ HH-ILS-CP120-5K HH-ILS-CP120-5KV HH-ILS-CDC120-5K HH-ILS-CDC120-5KV HH-ILS-CDC120-5KW HH-ILS-CDC120-5KX HH-ILS-CDC120-5KY HH-ILS-CDC120-5KZ HH-ILS-CP150-5K HH-ILS-CP150-5KV HH-ILS-CDC150-5K HH-ILS-CDC150-5KV HH-ILS-CDC150-5KW HH-ILS-CDC150-5KX HH-ILS-CDC150-5KY HH-ILS-CDC150-5KZ HH-ILS-CP200-5K HH-ILS-CP200-5KV HH-ILS-CDC200-5K HH-ILS-CDC200-5KV HH-ILS-CDC200-5KW HH-ILS-CDC200-5KX HH-ILS-CDC200-5KY HH-ILS-CDC200-5KZ HH-ILS-CP250-5K HH-ILS-CP250-5KV HH-ILS-CDC250-5K HH-ILS-CDC250-5KV HH-ILS-CDC250-5KW HH-ILS-CDC250-5KX HH-ILS-CDC250-5KY HH-ILS-CDC250-5KZ HH-ILS-CDC300-5K HH-ILS-CDC300-5KV HH-ILS-CDC300-5KW HH-ILS-CDC300-5KX HH-ILS-CDC300-5KY HH-ILS-CDC300-5KZ HH-ILS-CDC400-5K HH-ILS-CDC400-5KV HH-ILS-CDC400-5KW HH-ILS-CDC400-5KX HH-ILS-CDC400-5KY HH-ILS-CDC400-5KZ HH-ILS-CP120-5KW HH-ILS-CP150-5KW HH-ILS-CP200-5KW HH-ILS-CP250-5KW HH-ILS-CP120-5KX HH-ILS-CP150-5KX HH-ILS-CP200-5KX HH-ILS-CP250-5KX HH-ILS-CP120-5KY HH-ILS-CP150-5KY HH-ILS-CP200-5KY HH-ILS-CP250-5KY HH-ILS-CP120-5KZ HH-ILS-CP150-5KZ HH-ILS-CP200-5KZ HH-ILS-CP250-5KZ Factory Special Order Only; subject to minumum quantity and lead times at time of order. Contact Fulham for requirements prior to order. Orders are non-cancellable. Lamp Advanced Features POWER SOURCE: 120V - 277V EXTENSION WIRE P/N HHILPE00004 HHILPE00012 HHILPE00003 *HHILPE00007 LENGTH INCHES 4" 12" 36" 84" FEET 0.3' 1.0' 3.0' 7.0' ASSEMBLY VIEW SCALE 1:5 NOTE: Product is shipped as shown SCALE 1:3 LENGTH WIRE SHIELD FEMALE CONNECTOR TO BALLAST WIRE SPECIFICATIONS: 150° 600V 18AWG MALE CONNECTOR TO LAMP NOTE: Standard Extension Wires HHILPE00007 available for Circular and Tubular Lamp systems only. Contact Fulham for assistance in engieering your custom wires options. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-6-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE LUMEN MAINTENANCE Cold Start Lumen Maintenance Chart Lumen Output (Fc) Input Power (W) (52ºC) Lamp Amalgam Temp. ((°C) °C) (-30ºC) 10 20 40 60 80 100 120 140 160 180 200 220 240 322 382 MINUTES HighHorse induction systems operate within a wide range of ambient; the chart is an example of a 100W induction system operated at extreme cold temperature. It is recommended if the system requires a cold start at -30°C that a thermal blanket be installed at the factory on the amalgam tip; this will ensure a consistent start and rapid stabilization of the lamp and lumen output. Note: Closed fixture example, actual performance varies with fixture types. NOTE: Purpose of Lumen Maintenance Chart is strictly to show relation of the three variables over time. % RATED LUMENS 100 95 Rated Lumen Maintenance Chart 90 Rated Lumen Maintenance is largely determined by operating temperature of the lamp and quality of lamp design; Fulham HighHorse induction systems are designed and manufactured with high quality tri-phosphors and solid amalgam to optimize the performance and rated life of the lamp. The above chart is intended to represent an average rated lumen output stated as a percentage of the initial lumen output over the rated life of the lamp. Operating the lamp within the temperatures specifcation will typically result in not less than 70% lumen output at 60Khrs. 85 80 75 70 65 60 55 50 0 20,000 40,000 60,000 OPERATING HOURS 80,000 100,000 SURVIVAL % 100 90 System Rated Life Chart 80 System Rated Life varies with operating temperature and application. Fulham HighHorse induction generators are designed with high quality long lasting components and when operated at the rated Tc 65ºC expected life is 60Khrs with failure rate of 15% to 20%. Operating temperatures less than the rated Tc 65ºC can typically improve life expectancy and reduce failure rate. 70 60 50 20,000 0 40,000 60,000 80,000 100,000 Relative Lumen Output OPERATING HOURS 110 220 100 200 90 180 80 160 70 140 60 120 50 40 100 100W ballast 80 30 60 20 Lumen output is directly related t System Power and Amalgam Temperature; properly designed systems result in a stable lamp condition and maximum light output. All Fulham Engineered HighHorse Induction systems operate with less than a 15% vatiation over a wide range of Amalgam operating temperature (60ºC - 125ºC). Fulham Retro-fit systems are engineered for a maximum light output and improved life expectancy. 40 Relative Light Output System Power 10 0 40 Relative Lumen Output Chart 50 60 70 80 90 100 110 120 130 20 0 140 Amalgam Temperature (C°) This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-7-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE TEMPERATURE TEST POINTS PLEASE NOTE: Induction lamps are fragile and require care when handling; DO NOT allow the glass to come in contact with metal objects. The amalgam glass can be easily broken. 8 1 7 6 CIRCULAR LAMP 1 2 3 DISC BALLAST 3 3 1 2 2 DIE CAST BALLAST PROFILE BALLAST CIRCULAR INDUCTION SYSTEM TEMPERATURE CHART T E S T P O IN T 1 2 3 4 5 6 7 8 9 10 11 12 13 T E M P E R AT U R E T E S T P O IN T S : B ALLAS T : T C B ALLAS T : S ID E 1 B ALLAS T : S ID E 2 B ALLAS T P LAT E /MO UNT ING LO C AT IO N B ALLAS T AMB IE NT LAMP B AS E (HE AT S INK ) LAMP C O IL LAMP AMALGAM T IP LAMP AMB IE NT C O IL W IR E R AT ING N/A LAMP T UB E O N INS ID E C E NT E R W IR E C O NNE C T O R Note: Test points 2 and 3 are on the side of the ballast; location is not precise. R AT E D T E M P E R AT U R E < 65ºC (149ºF ) < 65ºC (149ºF ) < 65ºC (149ºF ) N/A N/A 100ºC (212ºF ) - 130°C (266°F ) < 160ºC (320ºF ) 55ºC (131ºF ) - 125ºC (257ºF ) < 80ºC (176ºF ) < 140ºC (284ºF ) N/A < 140ºC (284ºF ) < 105ºC (221ºF ) M AX T E M P E R AT U R E 65ºC (149ºF ) 65ºC (149ºF ) 65ºC (149ºF ) N/A N/A 130ºC (266ºF ) 200ºC (392ºF ) 125ºC (257ºF ) < 100ºC (212ºF ) 150ºC (302ºF ) N/A 180ºC (356ºF ) 105ºC (221ºF ) NOTE: TEMPERATURE MEASUREMENTS ARE RECOMMENDED TO BE AT THE RATED TEMPERATURE FOR BEST PERFORMANCE AND LIFE EXPECTANCY. LAMP AND GENERATOR TEMPERATURES MAY NOT EXCEED THE MAXIMUM OPERATING AMBIENT TEMPERATURE WHEN INSTALLED IN A FIXTURE. CONTACT FULHAM FOR APPROVED TEMPERATURE TEST PROCEDURE. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-8-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE DIMENSIONS - CIRCULAR H .03" H .03” L .15" L .03" X .15" X .15" 40W - 55W 70W~400W Circular Lamp Model No. L (in) H (in) ØX (in) Input Wire L (in) HH-IL-C40W5K 6.49 2.78 6.04 15 ± 1" HH-IL-C55W5K 6.49 2.78 6.04 15 ± 1" HH-IL-C70W5K 7.89 3.04 7.22 15 ± 1" HH-IL-C80W5K 7.89 3.04 7.22 15 ± 1" HH-IL-C100W5K 9.46 3.04 8.57 15 ± 1" HH-IL-C120W5K 10.75 3.04 9.82 15 ± 1" HH-IL-C150W5K 12.58 3.04 11.62 15 ± 1" HH-IL-C200W5K 14.97 3.04 13.92 15 ± 1" HH-IL-C250W5K 15.76 3.02 15.28 15 ± 1" HH-IL-C300W5K 18.20 3.02 17.28 15 ± 1" HH-IL-C400W5K 18.61 3.00 17.80 15 ± 1" Contact Fulham for detailed drawings. * Subject to change. Contact Fulham for specific wire lengths. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-9-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE DIMENSIONS - BALLASTS X .05" H .10" Disc Ballast (White) Disc Ballast Model No. SIZE H (in) ØX (in) Input wire L (in) Output wire L (in)* HH-IB-UNV-CDS40 SMALL 9.52 8.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS70 SMALL 9.52 8.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS80 SMALL 9.52 8.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS100 SMALL 9.52 8.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS120 MEDIUM 10.30 9.60 10 ± 1" 10 ± 1" HH-IB-UNV-CDS150 MEDIUM 10.30 9.60 10 ± 1" 10 ± 1" HH-IB-UNV-CDS200 MEDIUM 10.30 9.60 10 ± 1" 10 ± 1" HH-IB-UNV-CDS250 STANDARD 10.94 11.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS300 STANDARD 10.94 11.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS400 STANDARD 10.94 11.04 10 ± 1" 10 ± 1" HH-IB-UNV-CDS500 LARGE 11.75 14.99 10 ± 1" 10 ± 1" Contact Fulham for detailed drawings. * Subject to change. Contact Fulham for specific wire lengths. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-10-Rev Q SYSTEM MODEL #: DATE / / PROJECT TYPE DIMENSIONS - BALLASTS W± .03” W± .03” L± .03” L± .03” H± .03” H± .03” RUBBER GASKET Die Cast Ballast (White) Profile Aluminum Ballast (Black) Die Cast ballast Model No. Size L W H Input Wire L (in) Output Wire L (in)* HH-IB-UNV-TCDC80 SMALL 10.16 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC100 SMALL 10.16 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC120 SMALL 10.16 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC150 SMALL 10.16 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC200 STANDARD 13.49 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC250 STANDARD 13.49 7.49 3.12 35-45 4-5 HH-IB-UNV-TCDC300 STANDARD 13.49 7.49 3.12 35-45 4-5 HH-IB-UNV-CDC400 STANDARD 13.49 7.49 3.12 35-45 4-5 Size L W H Input Wire L (in) Output Wire L (in)* HH-IB-UNV-CP40 SMALL "40" 5.98 3.66 1.63 10± 1" 10± 1" HH-IB-UNV-CP55 SMALL "40" 5.98 3.66 1.63 10± 1" 10± 1" HH-IB-UNV-TCP70 MEDIUM 7.06 4.12 1.91 10± 1" 10± 1" HH-IB-UNV-TCP80 MEDIUM 7.06 4.12 1.91 10± 1" 10± 1" HH-IB-UNV-TCP100 MEDIUM 7.06 4.12 1.91 10± 1" 10± 1" HH-IB-UNV-TCP120 STANDARD 8.46 4.75 2.07 10± 1" 10± 1" HH-IB-UNV-TCP150 STANDARD 8.46 4.75 2.07 10± 1" 10± 1" HH-IB-UNV-TCP200 STANDARD 8.46 4.75 2.07 10± 1" 10± 1" HH-IB-UNV-TCP250 LARGE 10.00 4.75 2.07 10± 1" 10± 1" Profile Ballast Model No. Contact Fulham for detailed drawings. * Subject to change. Contact Fulham for specific wire lengths. This is an original product from Fulham, Co., Inc. Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2009-512-11-Rev Q