Download Watches Your Lighting Investment - Match

Functions of MATCH Switch 2.0
Product List
Timer Support : Up to (64) timers can be programmed on
each device.
Series
MATCH
SWITCH 2.0
Meter
Dimmer
Occupancy
Sensor
MATCH-D1MPT
V
V (Phase)
V
MATCH-D2MPT
V
V (0~10V)
V
MATCH-D3MPT
V
V (PWM)
V
Series
M-Box-D2MPT
Meter
Dimmer
Occupancy
Sensor
V
V
V
Android Support : 3.0 and higher.
Dual Mode Control : Direct control ON/OFF from wall switch
touch panel or remote control from a mobile device with
an internet connection via MATCH APP.
Meter Support : Reports lighting voltage, current output
and energy usage, as well as displays a histogram of daily,
weekly, monthly and yearly energy consumption.
Occupancy & Vacancy Sensors
MATCH
DEMO BOX
Ambient
Light Occupancy
Sensor
Sensor
V (0~10V)
V
V
Meter Dimmer
Series
WD-D2MPL
V
※ For Ambient Light Sensor (Daylight harvesting)
function, use with MATCH Sensor.
Wi-Fi
LED Driver
Series
MS-LP
MATCH Sensor
Ambient
Meter Dimmer
Light Occupancy
Sensor
Sensor
V
V
※ For Ambient Light Sensor (Daylight harvesting)
function, use with Wi-Fi LED Driver.
Mechanism of MATCH Switch 2.0
1.92 inches
(48,76 mm)
2.94 inches
(74.7 mm)
4.7 inches
(119.3 mm)
Top View
iOS Support : Currently supports iOS 7.1 and higher. APP runs
on iPhone/iPad/iPad Mini.
Front View
Horizontal
Side View
Contact Information
Address: 2995 Gordon Ave. Santa Clara, CA 95051
Email: [email protected]
Tel: (408) 988-8808
Fax: (408) 245-3903
Daylight Harvesting : For daylight harvesting function, use
with Wi-Fi LED Driver & MATCH Sensor.
Manual Dimming Control : MATCH provides full range
dimming by sliding your finger up and down the middle of
the touch panel.
Manual ON/OFF Control : MATCH provides manual on/off
control by simply tapping the surface of the touch panel.
ASHRAE Standard & Title 24 Compliant :
MATCH complete solution meets or exceeds all energy
codes and standards including ASHRAE Standard and
California Title 24.
Specifications of MATCH Switch 2.0
Protocol
Wi-Fi
User Selectable
Luxul LED tubes, 1~2 tube, 3~4 tube, dimmable driver
AP Mode
Wi-Fi AP, router
Power
100~277Vac, 50Hz or 60Hz
Frequency
802.11 b/g/n 1T1R
Wi-Fi Operation Range
Up to 100 feet (about 30m)
Data Rate Mode
OFDM, DSSS
Power Meter
Tolerance < 2%, AC 90~277V, ≦10A, PF 0~1, 0~2770Watt
Dimming Control
0~10v or PWM or 0~180 degree
Occupancy Sensor
Top view 60 degree, side view 45 degree, distance 4M
Ambient Light Sensor
3 to 220K lux bright sunlight, light wavelength 380~780nm
Operation temperature: -20 ~ 50°C
Working Environment
Storage temperature: - 30 ~ 85°C
Humidity (non-condensing): 20% - 70%RH
Dimensions (D x W x H)
Diameter : 48,76 mm / 1.92inch
74.7 mm / 2.94inch
Width:
119.3 mm / 4.7inch
Height:
Watches Your Lighting Investment
www.matchlux.com
Meter Capabilities
MATCH’s meter feature reports lighting
voltage, current output and energy
usage, as well as displays a histogram
of daily, weekly, monthly and yearly
energy consumption.
User Friendly APP
MATCH iOS/Android APP is easy to use
and gives users complete control of their
MATCH devices and lighting.
Watches Your Lighting Investment
Mobile ON/OFF Switch
MATCH allows users to
easily and instantly turn
ON/OFF their lighting
fixtures from anywhere
in the world.
METER
CAPABILITIES
USER
FRIENDLY APP
ON/OFF
SWITCH
SWITCH
SCHEDULING
OCCUPANCY
SENSOR
DAYLIGHT
HARVESTING
DIMMING
EASY INSTALLATION
Switch Scheduling
MATCH’s Switch Scheduling allows
users to set ON/OFF timers of their
lighting via MATCH APP on a mobile
device.
MATCH (Metered smArt swiTCHes) creates the ability to control
lighting and monitor energy consumption from anywhere in the
Switch Occupancy Sensor
world via a smartphone and/or tablet with access to internet
Daylight Harvesting
networks through MATCH APP.
From MATCH iOS /Andriod APP, users can install MATCH devices,
control and monitor energy usage of multiple devices in multiple
MATCH occupancy sensor detects
occupancy of a space and
automatically turns lights on/off
depending on space usage.
locations, set ON/OFF timers, control dimming, activate occupancy
and daylight harvesting sensors.
MATCH uses daylight to offset the
amount of lighting needed to
properly light a space.
MATCH switches features include dimming, occupancy sensor and
time scheduling to regulate lighting consumption. MATCH switches
are also compatible with dimmable lighting ballast.
Dimming
MATCH is designed for easy DIY installation and as a suitable
replacement for existing lighting switches, but with the added
Easy Installation
advantages of wireless lighting control and metering.
With a 100V/277V power supply and a maximum output of 1939VA,
MATCH is suitable for almost every single pole switch configuration,
MATCH provides dimming options
by allowing users to increase and
decrease light intensity to their
preferred setting.
with enough power to handle 90 T8 4ft LED tubes.
MATCH Switch is easy to install
and user friendly. MATCH
application walks you through
the installation process with
step-by-step instructions.