Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Fire Alarm Systems | D336A 4 in. (10 cm) Analog Detector Base D336A 4 in. (10 cm) Analog Detector Base www.boschsecurity.com The D336A base is used with smoke and heat detector heads to provide early fire warning for life safety and property protection systems. These bases are compatible with the Bosch Security Systems' D8024 and D10024A Analog Fire Alarm Control Panels (FACPs) and with the following Bosch Security Systems' detector heads: u Modular design with easy head removal for cleaning and servicing u Advanced analog communication protocol u Data In and Out terminals provided u Standard screw terminal connections u Remote LED output Certifications and approvals Region Certification USA UL UROX_S4992 - Smoke-Automatic Fire Detectors CSFM 7300-1615-0115 NYCMEA 26-02-e,_vol-3 • D322A Analog Heat Detector • D323A Analog Photoelectric Smoke Detector • D324A Analog Ionization Smoke Detector In these systems, the circuit typically runs on 18 AWG to 16 AWG (ISO 0.75 mm2 to 1.5 mm2) wire and connects to a Bosch Security Systems' D9067 Polling Circuit Module. Wire length (maximum loop resistance of 40 Ω) in the analog device polling circuits in these systems can exceed 4750 ft (1450 m). Each analog polling circuit can support up to 126 device addresses. Install the base in either a Class A or a Class B analog polling circuit. Installation/configuration notes Modular Design The D336A is part of a two-piece modular design smoke or heat detector assembly. The permanently‑installed bases provide in and out connection points for the polling circuit. Mounting The bases install over four‑inch octagonal or square back boxes. For UL Listing requirements, space the detectors no more than 30 ft (9 m) apart. Parts included Quant. Component 1 Detector base 2 | D336A 4 in. (10 cm) Analog Detector Base 1 Hardware pack 1 Literature pack Technical specifications Electrical Current Draw Depends on detector head Voltage (Operating) 24 VDC nominal; 17 VDC to 41 VDC range Environmental Relative Humidity 95% maximum, non-condensing at +104°F (+40°C) Temperature (Operating) +32°F to +100°F (0°C to +38°C) Mechanical Color Ivory Dimensions (diameter x H) 4 in. x 1.5 in. (10 cm x 3.8 cm) Material Acrylonitrile-chlorinated polyethylenestyrene terpolymer (ACS) plastic Weight 2.3 oz (65 g) Ordering information D336A 4 in. (10 cm) Analog Detector Base The D336A Analog detector base measures 4 in. (10 cm) in diameter and is used with the D8024 and D10024A Analog Fire Alarm Control Panels. Order number D336A Represented by: Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 [email protected] www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 [email protected] www.boschsecurity.com © Bosch Security Systems 2014 | Data subject to change without notice 2705786635 | en, V3, 02. Jul 2014 Asia-Pacific: Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 [email protected] www.boschsecurity.asia China: America Latina: Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98 North IBP CEP 13065-900 Changning District, Shanghai Campinas, Sao Paulo, Brazil 200335 China Phone: +55 19 2103 2860 Phone +86 21 22181111 Fax: +55 19 2103 2862 Fax: +86 21 22182398 [email protected] www.boschsecurity.com.cn www.boschsecurity.com