* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Video Transcript - Rose
Survey
Document related concepts
Waveguide filter wikipedia , lookup
Topology (electrical circuits) wikipedia , lookup
Operational amplifier wikipedia , lookup
Mechanical filter wikipedia , lookup
Index of electronics articles wikipedia , lookup
Crystal radio wikipedia , lookup
Scattering parameters wikipedia , lookup
Valve RF amplifier wikipedia , lookup
Yagi–Uda antenna wikipedia , lookup
Mathematics of radio engineering wikipedia , lookup
RLC circuit wikipedia , lookup
Two-port network wikipedia , lookup
Network analysis (electrical circuits) wikipedia , lookup
Distributed element filter wikipedia , lookup
Antenna tuner wikipedia , lookup
Standing wave ratio wikipedia , lookup
Transcript
We’re looking for the equivalent impedance between terminals G and H. The circuit, however, is given with all of its elements specified in terms of admittance. We’ll first convert those to impedance, then work the problem entirely in terms of impedance. Recall that impedance is the reciprocal of admittance. For example, the reciprocal of -j 30 mS is +j 33.3 Ω. You might also note that since the impedance is positive, the original element was apparently an inductor. All the other inductors have a similar calculation. The reciprocal of j 70 mS is –j 14.3 Ω. Those two elements are capacitors. If it’s purely real, we’re looking at a resistor. It looks like I forgot a capacitor over here. We’re now ready to begin looking for series and parallel combinations to try to simplify the circuit. These two elements are in series, as are these two. Their impedances simply add together into a combined impedance. The top equivalent element is 20 – j 14.3 Ω and the bottom equivalent element is 25 + j 16.7 Ω. These elements share the same pair of nodes and are in parallel, as are these two. We use the reciprocal of the sum of the reciprocals. We use a similar process to find the equivalent impedance on the bottom. Now we have worked the circuit down into this form. These elements are in series, so we just add together the two complex numbers. We have one final parallel combination to take care of. We have found our equivalent impedance and we are done.