Download 60KB - Nitek

PROJECT NUMBER ______________
PROJECT NAME__________________
DATE ___________
PROJECT LOCATION _____________
___________________________________________
TECHNICAL SPECIFICATIONS
SECTION 27 20 00 – DATA COMMUNICATIONS
SECTION 27 21 29 - DATA COMMUNICATIONS SWITCHES AND HUBS
TYPE IP1648 - 16 PORT RACK MOUNTED POE SUPPLY
PART 1 GENERAL
1.01 All equipment to be supplied under this specification shall be new and the current
model of a standard product of an OEM of record. An OEM of record shall be
defined a a company whose main occupation is the manufacture for sale of the
equipment supplied and which:
A. Maintains a factory production line for the item submitted.
B. Maintains a stock of replacement parts for the item submitted.
C. Maintains engineering drawings, specifications, and operating manuals for
the items submitted.
D. Has published and distributed descriptive literature and equipment
specifications on the items of equipment submitted.
1.02
1.03
1.04
Specifications of equipment as set forth herein are salient and minimum
requirements, unless otherwise stated and shall not be construed as limiting the
overall quality, quantity or performance characteristics of items furnished
System and components shall have been thoroughly tested and proven in actual
use.
All systems and components shall be provided with the availability of a toll free
(U.S. and Canada) technical support number from the manufacturer. The number
shall provide technical assistance for either the dealer/installer or the end user at
no charge
PART 2 SPECIFICATIONS
2.0.1 The 16 Port Rack Mounted PoE Power Supply (PoE Supply) shall be a NITEK
Model IP1648 or approved equivalent. The PoE Supply shall be IEEE 802.3AF
compliant and shall be configured to provide PoE voltage from each of the
16 outputs to a 10/100 network for powering compliant devices, when
connected as specified.
2.0.2 The PoE Supply shall have a front panel consisting of 4 banks of RJ45 connectors
with 8 in each bank. The lower row of RJ45 connectors shall be the Network
input and the upper row shall be the PoE output.
2.0.3
Each of the 16 PoE output jacks of the PoE Supply shall provide up to 15.4 watts
of power. Total power output of the PoE Supply shall meet or exceed 246.4 watts.
2.0.4 Each of the 16 PoE output jacks of the PoE Supply shall automatically detect PoE
compliant devices when connected and shall switch on power to the PoE device.
When power is present, a power indicator LED located on the jack will be
illuminated.
1
TECHNICAL SPECIFICATIONS
SECTION 27 20 00 – DATA COMMUNICATIONS
SECTION 27 21 29 - DATA COMMUNICATIONS SWITCHES AND HUBS
TYPE IP1648 - 16 PORT RACK MOUNTED POE SUPPLY
PART 2 SPECIFICATIONS (Continued)
2.0.5
Each of the 16 PoE output jacks shall be protected by an auto-resetting overload device,
which shall trip and interrupt the circuit when the rated power has been exceeded. The
power shall be reset when the overload is removed.
2.0.6
The PoE Supply shall operate over a primary line voltage range of 115 VAC to 230VAC,
50/60 Hz. Connection to the primary line shall be by means of an IEC320 power
connector.
2.0.7
The PoE Supply shall operate over an ambient temperature range of 0 - +37
degrees C / 32 – 98.6 degrees F.
2.0.8
The PoE Supply enclosure shall be CR steel, painted black and shall fit a standard 19”
equipment rack and shall be one rack height. Overall size shall be 1.75” H x 19.0” W x
9.2” D.
2.0.9
Power Supply Weight shall be 9 lbs. maximum.
2