Download Resistance Review--Principles of Technology

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Operational amplifier wikipedia , lookup

Nanogenerator wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Negative resistance wikipedia , lookup

Power electronics wikipedia , lookup

CMOS wikipedia , lookup

Multimeter wikipedia , lookup

TRIAC wikipedia , lookup

Opto-isolator wikipedia , lookup

Lumped element model wikipedia , lookup

Power MOSFET wikipedia , lookup

Thermal copper pillar bump wikipedia , lookup

Current source wikipedia , lookup

Rectiverter wikipedia , lookup

Surge protector wikipedia , lookup

Ohm's law wikipedia , lookup

Current mirror wikipedia , lookup

Electrical ballast wikipedia , lookup

Resistive opto-isolator wikipedia , lookup

Thermal runaway wikipedia , lookup

Transcript
Resistance Review--Principles of Technology
1. What does the thermal conductivity of a material depend on?
2. Thermal resistance is the opposition to the flow of what?
3. Thermal resistance is the ratio of what two things?
4. Dry friction depends on the force that presses two surfaces together and on what other
property?
5. In mechanical systems, how can you reduce friction?
6. Viscosity of most liquids _____________________ (increases, decreases) as
temperature increases.
7. Drag forces on a car moving through air can be reduced by
_______________________.
8. Kinetic friction between two surfaces is always ________ [greater, less] than static
friction between the same surfaces.
Series or Parallel Circuits?
9. the voltage drop across the lamps is the same, and equals the potential difference of
the power supply
10. more that one path for current
11. the current through each device and everywhere in the circuit is the same
12. 1/Rtotal = 1/R1 + 1/R2
13. the total current through the circuit is equal to the sum of the currents through all the
devices
14. one path for current
15. Rtotal = R1 + R2
16. the voltage drop across each device is the product of the lamp’s resistance and the
current.