Download 5000A-100 - Innovations in Optics

s o lu t i o n s i n l i g h t
LED Driver 5000A-100
OEM 75Amp, 5.5 Volt Single Channel Driver/Controller
The Model 5000A-100 is an OEM LED Driver/Controller that provides constant
current in either continuous, pulsed or PWM modes. An embedded system adds
network control with Ethernet or USB connectivity. Drive current in continuous
mode is selectable from 7.5 to 75A at 0.6 to 5.5VDC output. The output current setting is
adjustable either locally or remotely from 100% down to 10% using analog adjustment and as low as 1%
with PWM. Both analog and digital remote controls are built-in.
The 5000A-100 can also be used with third party LED illuminators and laser diodes as a constant current, DC
to DC driver/controller. Included are I/O connectors for thermistors or photosensors for system monitoring
or feedback loop control. Operation of cooling fans mounted to the driver as well as the LED illuminator is
tied to the +24 VDC input power. The compact driver can be panel mounted or DIN rail mounted.
Features:
Compatible Products:
• Mode: Continuous, pulsed, or PWM
• LumiBrightTM High Power White LEs
• Ethernet or USB 2.0
• LumiBright Ultra-Violet LEs
• Temperature sensors
• LumiBright XL
• External Trigger
• UV DMD Illuminators
• Cooling fan operation
• DIN rail mounting clip
Typical Applications:
• Direct Imaging
Options:
• 3D Printing
• Heat Sink
• UV Curing
• Heat sink and Fan
1
Copyright © 2016 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
[email protected]
DS-5000A-100-160112
5 0 0 0 a - 1 0 0 7 5 a m p, 5 . 5 v o lt d r i v e r / c o n t r o l l e r
specifications
Parameter
Specification
Comment
Type
DC to DC constant current, dimmable
400W maximum power
Output Current
7.5 to 75A
Set remotely
Output Voltage
0.6 to 5.5 VDC
Single channel, cathode ground
Input Voltage
+24 VDC @ 20A max
+/-5%
Efficiency
85% minimum
At maximum load (75A, 5.5VDC)
Current Ripple
0.5% RMS maximum
At maximum voltage (5.5VDC)
Cooling Fan Output (X2)
+24 VDC output, PWM speed control, 2A max
(driver fan, LED fan)
PWM frequency: 25kHz
Over Temperature Sensors
In both LED module and driver
Operating Modes
Continuous Mode (CM)
Pulsed Mode
User selectable
External Trigger
Instantaneous or with programmable delay
User enabled
Dimming
Analog: 100% down to 10%
PWM: 100% down to 0.05%
Local or Remote
LED module I/O
Thermistor, photosensor, Vf sense
Monitoring or feedback loop
Pulse Repetition Rate
10 kHz
Maximum
Pulse Width
1 msec
Minimum
USB 2.0
Standard-A type
10/100 Mbps Ethernet
RJ-45
Operating Temperature
-20° C to 45° C
<85% RH, non-condensing
Size and weight
125 x 105 x 40mm, 500 grams
Mounting
Panel mounting, DIN rail adapter, or rubber bumper feet
Connectivity
The products, their specifications and other information appearing in this document are subject to change by Innovations in Optics, Inc. (IOI) without
notice. IOI assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability
of the product for any particular application or as any other form of warranty. IOI product warranties are limited to only such warranties as accompany
a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by IOI of any intellectual property rights that IOI may have in such information. LumiBright™ is
a trademark of IOI, all rights reserved. This product is protected by U.S. Patents and Patents Pending in the U.S. and other countries.
2
Copyright © 2016 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
[email protected]
DS-5000A-100-160112