Download Printable PDF File Format

033-54 Welding 2012_033-054 Welding1a 08.qxd 3/19/13 12:32 PM Page 5
Welding Accessories
Welding
Accessories
millermatic 252
Highest output in its class (250 A at 28 VDC). Weld longer on high end applications. NEW! Angled, dual-gear driven, cast aluminum drive system features no-tool, quickchange reversible drive rolls and an easy-to-set, scaled tension knob. Less weld cleanup with Active Arc Stabilizer ™ — patented Miller design provides excellent starts
proven superior to the competition. NEW! Patent-pending EZ-Change ™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack —no need to lift
cylinders. NEW! Auto Gun Detect ™ allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed
speed and timer of the active gun. Line voltage compensation keeps power constant even if power input varies by ±10%. NEW! EZ-Access ™ Consumable Compartment
and Parameter Chart — set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.
NEW! Larger work area — now with longer 15-ft M-25 gun. Fan-On-Demand ™ cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine. NEW! Large, digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. Standard run-in,
pre/postflow, burnback, spot/delay (stitch) timer menu. NEW! Push-Pull Gun Direct Connect — now directly connects your push-pull gun, no extra module required.
millermatic 350/350p
350P
Built-in pulsed MIG programs (Millermatic 350P only):
•.035 and .045 in (0.9 and 1.2 mm) for mild or stainless steel. •.035 and .047 in (0.9 and 1.2 mm) for 4000 and 5000 series aluminum. •.045 in (1.2 mm) for metal core.
All programmed information is stored for MIG, push-pull and spool guns, and is restored after each power up. Aluminum Pulse Hot Start™ (Millermatic 350P only) automatically provides more arc power to eliminate a “cold start” that is inherent with aluminum starts. 1- or 3-phase input power with Line Voltage Compensation for constant
output even with fluctuations to the input power. Fan-On-Demand cooling only operates when needed, reducing power consumption and contaminants inside the unit.
Industrial, 4-roll wire drive system features two easy-to-set, scaled, tension adjustments and quick-change reversible drive rolls for .035 and .045 in (0.9 and 1.2 mm)
wire. Superior Aluminum Performance— direct connection for optional XR ™ push-pull guns or Spoolmatic ® spool gun. With Miller’s exclusive Gun-On-Demand, simply
pull the trigger for the gun to be used and you’re ready to weld. Special Features: •Run-in adjustment for MIG, push-pull and spool guns. •Built-in 2-minute spot timer.
•Pre-flow and post-flow adjustment. •View actual welding amperage/voltage during welding, and 5 seconds after arc has shutoff. •SharpArc ™ controls welding arc
cone width in pulsed MIG welding mode. •Inductance control customizes weld out put characteristics in MIG welding mode. Exclusive Internal Timers:
•Adjustable crater feature optimizes crater size for steel, stainless, aluminum and metal-core applications. •Crater Time Delay allows deactivation of crater feature for
tack or small welds. •Wire Jog Mode - If trigger is pressed and no arc is detected after 3 seconds, the welding output will be shut off and the unit will go into JOG
MODE for feeding wire to the gun. - Gas Saver —Gas will automatically shutoff after 1 minute when no arc has been detected. - Wire Saver —Wire drive will auto
matically shutoff after 2 minutes when no arc has been detected.
millermatic paSSport
Self-contained gas cylinder provides 25 minutes of welding time. The cylinder holds 12 oz of CO2 . That’s 25 ft of weld on 3/16 in thick material with .030 in mild steel
wire. The cylinder can NOT be used with mixed gases. One empty cylinder is included with the system. Fan-On-Demand™, the fan only operates when the power supply
requires cooling —saving power and keeping the inside of the power supply clean. Auto-Line ™ provides state-of-the-art flexibility to the end user. The Auto-Line circuitry
automatically connects to 115/230 VAC, single-phase power without removing the cover to relink the power source. No longer is there a concern if you have the correct
machine for the shop or job site. Carries 8 inch spool of welding wire —convenient size spool for most wire types. High-quality arc characteristics feature positive arc starts
without popping and spatter, high-stability low-spatter CO2 welding, and outstanding mixed gas. Impact-resistant case provides strength and durability, protecting the internal components and welding wire. MILLER EXCLUSIVE! Multi-voltage plug (MVP™) allows you to connect to common 115 or 230 V power receptacles without the use
of any tools —choose the plug that fits the receptacle and connect it to the power cord. With arc control, you can select between a crisp-arc characteristic weld suited for
mild steel or a softer characteristic suited for stainless steel and some mild steel applications requiring a softer arc. Portability is number one when you have
to go to the job —because it can’t come to you. The Passport contains all you need to MIG weld in one small lightweight package. Durable cast aluminum feedhead incorporates dual-groove quick-change drive rolls and spring-loaded tension arm with calibrated tension knob —all designed to make
setup easier and faster. Handy side-storage pouch for work cable and clamp, M-10 gun, MVP adapters and power cable. Welder is warranted for 3 years,
parts and labor. Original main power rectified parts are warranted for 5 years. Gun warranted for 90 days, parts and labor. With the flip of a switch,
dual-gas supply selects between the internal CO2 gas supply when you’re on the move, or bulk supplywhen you’re in the shop or need mixed gas.
www.fmmafco.com
WORLD-WIDE
1.513.367.2151
CINCINNATI, OH – BIRMINGHAM, AL – CARSON CITY, NV – CHARLOTTE, NC
37
© 2013 - ALL RIGHTS RESERVED