Download A-Flame Corporation

A-Flame
Corporation
ArcMaster 1450
Production portability is here! You now have a choice of
an advanced, lightweight, Arc Spray System.
It has a small, lightweight (4.2 lbs) hand held gun. It is
your best solution to your need for a high performance Arc
Spray System.
The electric drive offers completely independent control
over both the airflow and the wire feed rate, which is not
normally possible with an air driven motor, great for spraying
rough surfaces.
For Engineered
Coatings
The system includes:



The custom Miller CV Power Supply, with built in pneumatic
and DC motor controls.
The 300-amp twin-wire Arc Gun.
A Wire Box and set of cables/hoses.
The State-of-the-art spray head has interchangeable nozzles,
supporting a wide range of atomizing airflow (including a highvelocity option) to meet your required coating structure.
Lightweight gun (4.2 lb / 1.9 kg) is made of advanced materials for
reliable operation in harsh industrial environments.
A Powerful Swiss made DC motor, with a planetary gearhead, is
enclosed in a dust proof protective housing which provides for the
smooth feeding of wire stock and ensures a stable arc. This
provides you with a very low maintenance cost, and greatly
reduced downtime and lost production.
The wire feed rollers provide a reliable wire grip for slip-free
operation with both hard solid and malleable cored wires.
The maintenance-free worm gearbox has a life expectancy of 10,000-12,000 hours.
The contact tips are made of W-Cu alloy, to provide a long life, even with hard wires and operating current up
to 300 Amps.
Web Site: http://www.aflame.com/
8175 Kroger Farm Road, Cincinnati, Ohio 45243 USA
Tel 513-831-4284
Fax 513-831-5237
E-Mail [email protected]
ArcMaster 1450 Specifications
Arc amperage
Duty cycle
Wire stock
Gun weight
Gun dimensions without handle
Type of wire feeding
Wire feed drive
Power supply input 60 Hz model
Power supply input, 50 Hz model
300 Amps Continuos Duty
100%
1.6 mm and 2.0 mm
4.2 lb (1.9 kg)
13”x4.7”x4.0” (330x120x100 mm)
pull
90 W DC motor
200/230/460/575 VAC 3-phase
380/400/440 VAC, 3-phase
Total weight (power leads not included)
Power supply dimensions
427 lbs. (194 kg) 735 lbs. (333 kg) crated for shipment
L x W x H 50”x30”x43” (1270x760x1090 mm)
Miller CV Power Supply
The CV power supply provides flat constant
potential volt/ampere characteristics, with a
continuous open circuit voltage control.
The power supply characteristics were developed
exclusively for metal spraying. These features
provide not only maximal arc stability, but also hold
noise emissions during spraying to the lowest
possible level.
This CV power unit is designed to be operated with
a three-phase, 50/60 HZ, AC power source. A set
of 30 foot cables comes with this system. They
may be longer if needed.
The Wire Box is an enclosure for the two wire spools. It
protects the operator from accidental contact with electrically
live wires; and, it prevents short circuits between the wires.
The Wire Box consists of:
• Wire spool spindle with brake assembly
• Wire guides and connectors for wire conduits
• Enclosure
• Wire conduits
W
Wire Box
You may lease this system, USA only, with a $1 buy-back, at the end of the lease.
Website: http://www.aflame.com/
8175 Kroger Farm Road, Cincinnati, OH 45243 USA
Tel 1(513)831-4284 Fax 1(513)831-5237 E-Mail [email protected]