Download Powered to Perform - Trans

A decentralized solution.
Many drive applications utilize control panels with complex wiring
taking up large amounts of space. These control panels are often mounted
away from the application requiring long expensive cables and other
hardware to connect the system.
Trans-Power V-Drives provide a decentralized solution where drives can
be located close to the application. Featuring on-board power disconnect,
programmable forward/reverse selector and speed potentiometer, they
allow for localized control.
Everyday Reliability
Expertise
and Support
Powered to Perform
The support only Kaman can provide.
Trans-Power V-Drives are distributed exclusively by
Kaman. That means our drives are backed and
supported by Kaman. The expert support you need
is just a phone call away. And, we have a national
network of over 250 locations and distribution
centers. So the drives you need are always close by,
in stock and ready to ship. Bottom line: we’ll make
sure you get the right drive for your application and
the fast, expert support you deserve.
Built to work as hard as you do.
When you need durable and reliable applied-power
components, depend on Trans-Power. We offer
quality-built, tested and proven components that are
designed to provide the dependable performance
you need for general-purpose applications. Trans-Power
components are available exclusively from Kaman,
one of the United States’ leading distributors of
industrial solutions. With simplified ordering and
off-the-shelf accessibility – plus Kaman’s unmatched
service and technical support – Trans-Power can
be your source for high-value applied-power
components. Whether you need components
for manufacturing, logistics or other commercial
applications, we’re Powered to Perform.
Distributed exclusively by Kaman.
Exceptional Value
800.526.2626
www.transpower.com
© 2015 Kaman Industrial Technologies Corporation. All rights reserved. Form No. 70559 (4/15)
Variable Frequency Drives
Built and Tested
to Deliver
Superior motor control.
Obtain the necessary control required for your
application. Trans-Power Variable Speed Drives
provide flexibility and simplicity for your motor
control application. Optimize speed and efficiency
for both fixed and variable load demands. In
addition, Trans-Power V-Drives are available with
an integrated power disconnect for decentralized
mounting solution allowing you to reduce
component costs and space in your facility.
IP66/NEMA4X enclosure.
Trans-Power drives feature robust NEMA 4X/ IP66
indoor rated enclosures designed to withstand
daily wash-down and provide superior protection
against dirt, dust and liquid. These reliable and
robust drives are built to perform in the most
demanding applications.
Simple start up.
Trans-Power V-Drives’ default settings, featuring
14 quick start parameters are suitable for most
applications so users can get up and running
quickly. For greater control and customization,
users can input up to 50 parameters manually
or via the optional Trans-Power V-STIK, a small
Bluetooth-compatible device that allows for rapid
copying of parameters between drives.
Features &
Specifications
FEATURES
• Switched and non-switched options available
• Intuitive user keypad
• Bright LED display
• Single and three-phase input available
• Simple commissioning
• Integral RFI filter
• Modbus communications
• Compact NEMA4X IP66 rated enclosure
• Brake resistor
• High overload capability • V-STIK Rapid Commissioning Tool
• Corrosion-resistant aluminum heat sink
• Preset speeds
• Digital and analog output relays
• 24 month warranty
Input Ratings
Drive Features
Drive Specifications
Industries:
• Food and beverage
• Packaging
• Conveying
• Fan and pump
• Other harsh environments
A matched-power solution.
Trans-Power V-Drives run well
on Trans-Power brand inverter
rated motors. For more information on the full line of motors
carried in stock please contact
your local sales representative
or visit:
www.transpower.com
Drive Protection
Operational Conditions
Global Certifications
Maintenance
Robust NEMA
4X / 12 IP66
dust- and
water-proof drive
enclosure for harsh
environments
Ratings & Selection
Dimensions
Onboard speed
potentiometer for
easy adjustment*
RATINGS & SELECTION
Programmable
Forward/Off/
Reverse selector
switch*
Integrated power
off disconnect with
safety lock out*
V-STIK programming
tool for rapid
commissioning
and back of drive
parameters
*Included on
switched version
Optional V-Display remote operator
keypad with OLED screen
SPECIFICATIONS
Supply Voltage
110-480 VAC: +/- 10%
Supply Frequency
48-62Hz
Phase Imbalance
3% maximum
Power Cycles 120 per hour evenly spaced
Auto Restart Yes -- Up to 5 attempts
Configurable Fwd/0/ Rev Switch Switched version only
Preset Speeds 4 preset frequency / speeds
Display 6 character LED display
Simple Commissioning
14 parameter basic set up, 50 total parameters
Enclosure
NEMA 4X/12, IP66 (dust / water proof) indoor use Analog Inputs: two 0-10 VDC, 4 - 20mA
Relay Outputs: one Built-in form C relay, 250 VAC, 6A /30 VDC, 5A DC
Analog Output / Digital Output 0-10 VDC
Programming Keypad or optional V- STIK commissioning and back up drive parameters tool
Switching Frequency 4-32 kHz, default 8kHz
Voltage Boost
User selectable
Dynamic Braking Built-in brake chopper, frames 2 & 3
External Braking Resistor
Up to 150% dynamic braking with properly sized resistor
DC Injection Braking
Programmable 0-25 seconds at 0.0Hz
Volts/Hz V/Hz, adjustment user selectable
Output Frequency 0-500 Hz 0.1 Hz resolution
Accel/Decel Independent acceleration & deceleration ramps (0.0 to 600 seconds)
Keypad Speed Control Standard switched and non switched versions
Network Communications RS-485 2 wire MODBUS-RTU communications
PID Control Internal PID control with feedback display
Sink/Source Inputs Source, 24 VDC Logic
Under Voltage Protection against low input line voltage
Overload Capacity 150% for 60 seconds, 175% for 2 seconds
Output Short Circuit Phase to phase on output
Drive Over Temperature Heat sink sensor
Electronic Thermal Overload Electronic thermal overload protection for the connected motor
DC Bus Overvoltage DC Bus trip
Over Current Over-current / short-circuit protection
Output Phase Open output phase fault
Loss of Reference Loss of speed reference signal fault
Communication Error Detects communication error
Altitude 1,000 m (3,300 ft.) derate above 1,000m:1% per 100mm /Max 2000m
Ambient Temperature –10°C to 40°C, 14°F – 102°F
Relative Humidity
0% to 95%, non-condensing
c UL us, CE, C-tick, RoHS, ISO9001, ISO14001
Fault Log Last four faults stored with time stamp
Data Logging Output current, drive temperature, DC bus voltage
Monitoring Hours run meter, energy consumption meter
Part Number (without disconnect)
Part Number (with disconnect)
kW
HP
110 – 115V ± 10%, (230VAC 3 Phase Output), 1 Phase Input
TPVG11-½-4N
TPVG11-½-4S
0.37
0.5
TPVG11-1-4N
TPVG11-1-4S
0.75
1.0
TPVG11-1½-4N B
TPVG11-1½-4S B
1.1
1.5
200 – 240VAC ± 10%, 1 Phase Input
TPVG21-½-4N F
TPVG21-½-4S F
0.37
0.5
TPVG21-1-4N F
TPVG21-1-4S F
0.75
1.0
TPVG21-2-4N F
TPVG21-2-4S F
1.5
2.0
TPVG21-2-4N BF
TPVG21-2-4S BF
1.5
2.0
TPVG21-3-4N BF
TPVG21-3-4S BF
2.2
3.0
TPVG21-5-4N B
TPVG21-5-4S BF
4
5.0
200 – 240VAC ± 10%, 3 Phase Input
TPVG23-½-4N
TPVG23-½-4S
0.37
0.5
TPVG23-1-4N
TPVG23-1-4S
0.75
1.0
TPVG23-2-4N
TPVG23-2-4S
1.5
2.0
TPVG23-2-4N BF
TPVG23-2-4S BF
1.5
2.0
TPVG23-3-4N BF
TPVG23-3-4S BF
2.2
3.0
TPVG23-5-4N BF
TPVG23-5-4S BF
4
5.0
380 – 480VAC ± 10%, 3 Phase Input
TPVG43-1-4N F
TPVG43-1-4S F
0.75
1.0
TPVG43-2-4N F
TPVG43-2-4S F
1.5
2.0
TPVG43-2-4N BF
TPVG43-2-4S BF
1.5
2.0
TPVG43-3-4N BF
TPVG43-3-4S BF
2.2
3.0
TPVG43-5-4N BF
TPVG43-5-4S BF
4
5.0
TPVG43-7½-4N BF
TPVG43-7½-4S BF
5.5
7.5
TPVG43-10-4N BF
TPVG43-10-4S BF
7.5
10.0
Output
Current
(A)
Weight
(lbs)
Frame
Size
2.3
4.3
5.8
6.17
6.17
10.14
1
1
2
2.3
4.3
7.0
7.0
10.5
15.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.3
4.3
7.0
7.0
10.5
18.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.2
4.1
4.1
5.8
9.5
14.0
18.0
6.17
6.17
10.14
10.14
10.14
16.31
16.31
1
1
2
2
2
3
3
DIMENSIONS
Frame Size
1
2
3
PART NUMBER STRUCTURE
Height
9.13
10.12
12.20
Width
6.34
7.40
8.30
Depth
7.05
7.36
9.64
H
D
W
A decentralized solution.
Many drive applications utilize control panels with complex wiring
taking up large amounts of space. These control panels are often mounted
away from the application requiring long expensive cables and other
hardware to connect the system.
Trans-Power V-Drives provide a decentralized solution where drives can
be located close to the application. Featuring on-board power disconnect,
programmable forward/reverse selector and speed potentiometer, they
allow for localized control.
Everyday Reliability
Expertise
and Support
Powered to Perform
The support only Kaman can provide.
Trans-Power V-Drives are distributed exclusively by
Kaman. That means our drives are backed and
supported by Kaman. The expert support you need
is just a phone call away. And, we have a national
network of over 250 locations and distribution
centers. So the drives you need are always close by,
in stock and ready to ship. Bottom line: we’ll make
sure you get the right drive for your application and
the fast, expert support you deserve.
Built to work as hard as you do.
When you need durable and reliable applied-power
components, depend on Trans-Power. We offer
quality-built, tested and proven components that are
designed to provide the dependable performance
you need for general-purpose applications. Trans-Power
components are available exclusively from Kaman,
one of the United States’ leading distributors of
industrial solutions. With simplified ordering and
off-the-shelf accessibility – plus Kaman’s unmatched
service and technical support – Trans-Power can
be your source for high-value applied-power
components. Whether you need components
for manufacturing, logistics or other commercial
applications, we’re Powered to Perform.
Distributed exclusively by Kaman.
Exceptional Value
800.526.2626
www.transpower.com
© 2015 Kaman Industrial Technologies Corporation. All rights reserved. Form No. 70559 (4/15)
Variable Frequency Drives
Built and Tested
to Deliver
Superior motor control.
Obtain the necessary control required for your
application. Trans-Power Variable Speed Drives
provide flexibility and simplicity for your motor
control application. Optimize speed and efficiency
for both fixed and variable load demands. In
addition, Trans-Power V-Drives are available with
an integrated power disconnect for decentralized
mounting solution allowing you to reduce
component costs and space in your facility.
IP66/NEMA4X enclosure.
Trans-Power drives feature robust NEMA 4X/ IP66
indoor rated enclosures designed to withstand
daily wash-down and provide superior protection
against dirt, dust and liquid. These reliable and
robust drives are built to perform in the most
demanding applications.
Simple start up.
Trans-Power V-Drives’ default settings, featuring
14 quick start parameters are suitable for most
applications so users can get up and running
quickly. For greater control and customization,
users can input up to 50 parameters manually
or via the optional Trans-Power V-STIK, a small
Bluetooth-compatible device that allows for rapid
copying of parameters between drives.
Features &
Specifications
FEATURES
• Switched and non-switched options available
• Intuitive user keypad
• Bright LED display
• Single and three-phase input available
• Simple commissioning
• Integral RFI filter
• Modbus communications
• Compact NEMA4X IP66 rated enclosure
• Brake resistor
• High overload capability • V-STIK Rapid Commissioning Tool
• Corrosion-resistant aluminum heat sink
• Preset speeds
• Digital and analog output relays
• 24 month warranty
Input Ratings
Drive Features
Drive Specifications
Industries:
• Food and beverage
• Packaging
• Conveying
• Fan and pump
• Other harsh environments
A matched-power solution.
Trans-Power V-Drives run well
on Trans-Power brand inverter
rated motors. For more information on the full line of motors
carried in stock please contact
your local sales representative
or visit:
www.transpower.com
Drive Protection
Operational Conditions
Global Certifications
Maintenance
Robust NEMA
4X / 12 IP66
dust- and
water-proof drive
enclosure for harsh
environments
Ratings & Selection
Dimensions
Onboard speed
potentiometer for
easy adjustment*
RATINGS & SELECTION
Programmable
Forward/Off/
Reverse selector
switch*
Integrated power
off disconnect with
safety lock out*
V-STIK programming
tool for rapid
commissioning
and back of drive
parameters
*Included on
switched version
Optional V-Display remote operator
keypad with OLED screen
SPECIFICATIONS
Supply Voltage
110-480 VAC: +/- 10%
Supply Frequency
48-62Hz
Phase Imbalance
3% maximum
Power Cycles 120 per hour evenly spaced
Auto Restart Yes -- Up to 5 attempts
Configurable Fwd/0/ Rev Switch Switched version only
Preset Speeds 4 preset frequency / speeds
Display 6 character LED display
Simple Commissioning
14 parameter basic set up, 50 total parameters
Enclosure
NEMA 4X/12, IP66 (dust / water proof) indoor use Analog Inputs: two 0-10 VDC, 4 - 20mA
Relay Outputs: one Built-in form C relay, 250 VAC, 6A /30 VDC, 5A DC
Analog Output / Digital Output 0-10 VDC
Programming Keypad or optional V- STIK commissioning and back up drive parameters tool
Switching Frequency 4-32 kHz, default 8kHz
Voltage Boost
User selectable
Dynamic Braking Built-in brake chopper, frames 2 & 3
External Braking Resistor
Up to 150% dynamic braking with properly sized resistor
DC Injection Braking
Programmable 0-25 seconds at 0.0Hz
Volts/Hz V/Hz, adjustment user selectable
Output Frequency 0-500 Hz 0.1 Hz resolution
Accel/Decel Independent acceleration & deceleration ramps (0.0 to 600 seconds)
Keypad Speed Control Standard switched and non switched versions
Network Communications RS-485 2 wire MODBUS-RTU communications
PID Control Internal PID control with feedback display
Sink/Source Inputs Source, 24 VDC Logic
Under Voltage Protection against low input line voltage
Overload Capacity 150% for 60 seconds, 175% for 2 seconds
Output Short Circuit Phase to phase on output
Drive Over Temperature Heat sink sensor
Electronic Thermal Overload Electronic thermal overload protection for the connected motor
DC Bus Overvoltage DC Bus trip
Over Current Over-current / short-circuit protection
Output Phase Open output phase fault
Loss of Reference Loss of speed reference signal fault
Communication Error Detects communication error
Altitude 1,000 m (3,300 ft.) derate above 1,000m:1% per 100mm /Max 2000m
Ambient Temperature –10°C to 40°C, 14°F – 102°F
Relative Humidity
0% to 95%, non-condensing
c UL us, CE, C-tick, RoHS, ISO9001, ISO14001
Fault Log Last four faults stored with time stamp
Data Logging Output current, drive temperature, DC bus voltage
Monitoring Hours run meter, energy consumption meter
Part Number (without disconnect)
Part Number (with disconnect)
kW
HP
110 – 115V ± 10%, (230VAC 3 Phase Output), 1 Phase Input
TPVG11-½-4N
TPVG11-½-4S
0.37
0.5
TPVG11-1-4N
TPVG11-1-4S
0.75
1.0
TPVG11-1½-4N B
TPVG11-1½-4S B
1.1
1.5
200 – 240VAC ± 10%, 1 Phase Input
TPVG21-½-4N F
TPVG21-½-4S F
0.37
0.5
TPVG21-1-4N F
TPVG21-1-4S F
0.75
1.0
TPVG21-2-4N F
TPVG21-2-4S F
1.5
2.0
TPVG21-2-4N BF
TPVG21-2-4S BF
1.5
2.0
TPVG21-3-4N BF
TPVG21-3-4S BF
2.2
3.0
TPVG21-5-4N B
TPVG21-5-4S BF
4
5.0
200 – 240VAC ± 10%, 3 Phase Input
TPVG23-½-4N
TPVG23-½-4S
0.37
0.5
TPVG23-1-4N
TPVG23-1-4S
0.75
1.0
TPVG23-2-4N
TPVG23-2-4S
1.5
2.0
TPVG23-2-4N BF
TPVG23-2-4S BF
1.5
2.0
TPVG23-3-4N BF
TPVG23-3-4S BF
2.2
3.0
TPVG23-5-4N BF
TPVG23-5-4S BF
4
5.0
380 – 480VAC ± 10%, 3 Phase Input
TPVG43-1-4N F
TPVG43-1-4S F
0.75
1.0
TPVG43-2-4N F
TPVG43-2-4S F
1.5
2.0
TPVG43-2-4N BF
TPVG43-2-4S BF
1.5
2.0
TPVG43-3-4N BF
TPVG43-3-4S BF
2.2
3.0
TPVG43-5-4N BF
TPVG43-5-4S BF
4
5.0
TPVG43-7½-4N BF
TPVG43-7½-4S BF
5.5
7.5
TPVG43-10-4N BF
TPVG43-10-4S BF
7.5
10.0
Output
Current
(A)
Weight
(lbs)
Frame
Size
2.3
4.3
5.8
6.17
6.17
10.14
1
1
2
2.3
4.3
7.0
7.0
10.5
15.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.3
4.3
7.0
7.0
10.5
18.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.2
4.1
4.1
5.8
9.5
14.0
18.0
6.17
6.17
10.14
10.14
10.14
16.31
16.31
1
1
2
2
2
3
3
DIMENSIONS
Frame Size
1
2
3
PART NUMBER STRUCTURE
Height
9.13
10.12
12.20
Width
6.34
7.40
8.30
Depth
7.05
7.36
9.64
H
D
W
Built and Tested
to Deliver
Superior motor control.
Obtain the necessary control required for your
application. Trans-Power Variable Speed Drives
provide flexibility and simplicity for your motor
control application. Optimize speed and efficiency
for both fixed and variable load demands. In
addition, Trans-Power V-Drives are available with
an integrated power disconnect for decentralized
mounting solution allowing you to reduce
component costs and space in your facility.
IP66/NEMA4X enclosure.
Trans-Power drives feature robust NEMA 4X/ IP66
indoor rated enclosures designed to withstand
daily wash-down and provide superior protection
against dirt, dust and liquid. These reliable and
robust drives are built to perform in the most
demanding applications.
Simple start up.
Trans-Power V-Drives’ default settings, featuring
14 quick start parameters are suitable for most
applications so users can get up and running
quickly. For greater control and customization,
users can input up to 50 parameters manually
or via the optional Trans-Power V-STIK, a small
Bluetooth-compatible device that allows for rapid
copying of parameters between drives.
Features &
Specifications
FEATURES
• Switched and non-switched options available
• Intuitive user keypad
• Bright LED display
• Single and three-phase input available
• Simple commissioning
• Integral RFI filter
• Modbus communications
• Compact NEMA4X IP66 rated enclosure
• Brake resistor
• High overload capability • V-STIK Rapid Commissioning Tool
• Corrosion-resistant aluminum heat sink
• Preset speeds
• Digital and analog output relays
• 24 month warranty
Input Ratings
Drive Features
Drive Specifications
Industries:
• Food and beverage
• Packaging
• Conveying
• Fan and pump
• Other harsh environments
A matched-power solution.
Trans-Power V-Drives run well
on Trans-Power brand inverter
rated motors. For more information on the full line of motors
carried in stock please contact
your local sales representative
or visit:
www.transpower.com
Drive Protection
Operational Conditions
Global Certifications
Maintenance
Robust NEMA
4X / 12 IP66
dust- and
water-proof drive
enclosure for harsh
environments
Ratings & Selection
Dimensions
Onboard speed
potentiometer for
easy adjustment*
RATINGS & SELECTION
Programmable
Forward/Off/
Reverse selector
switch*
Integrated power
off disconnect with
safety lock out*
V-STIK programming
tool for rapid
commissioning
and back of drive
parameters
*Included on
switched version
Optional V-Display remote operator
keypad with OLED screen
SPECIFICATIONS
Supply Voltage
110-480 VAC: +/- 10%
Supply Frequency
48-62Hz
Phase Imbalance
3% maximum
Power Cycles 120 per hour evenly spaced
Auto Restart Yes -- Up to 5 attempts
Configurable Fwd/0/ Rev Switch Switched version only
Preset Speeds 4 preset frequency / speeds
Display 6 character LED display
Simple Commissioning
14 parameter basic set up, 50 total parameters
Enclosure
NEMA 4X/12, IP66 (dust / water proof) indoor use Analog Inputs: two 0-10 VDC, 4 - 20mA
Relay Outputs: one Built-in form C relay, 250 VAC, 6A /30 VDC, 5A DC
Analog Output / Digital Output 0-10 VDC
Programming Keypad or optional V- STIK commissioning and back up drive parameters tool
Switching Frequency 4-32 kHz, default 8kHz
Voltage Boost
User selectable
Dynamic Braking Built-in brake chopper, frames 2 & 3
External Braking Resistor
Up to 150% dynamic braking with properly sized resistor
DC Injection Braking
Programmable 0-25 seconds at 0.0Hz
Volts/Hz V/Hz, adjustment user selectable
Output Frequency 0-500 Hz 0.1 Hz resolution
Accel/Decel Independent acceleration & deceleration ramps (0.0 to 600 seconds)
Keypad Speed Control Standard switched and non switched versions
Network Communications RS-485 2 wire MODBUS-RTU communications
PID Control Internal PID control with feedback display
Sink/Source Inputs Source, 24 VDC Logic
Under Voltage Protection against low input line voltage
Overload Capacity 150% for 60 seconds, 175% for 2 seconds
Output Short Circuit Phase to phase on output
Drive Over Temperature Heat sink sensor
Electronic Thermal Overload Electronic thermal overload protection for the connected motor
DC Bus Overvoltage DC Bus trip
Over Current Over-current / short-circuit protection
Output Phase Open output phase fault
Loss of Reference Loss of speed reference signal fault
Communication Error Detects communication error
Altitude 1,000 m (3,300 ft.) derate above 1,000m:1% per 100mm /Max 2000m
Ambient Temperature –10°C to 40°C, 14°F – 102°F
Relative Humidity
0% to 95%, non-condensing
c UL us, CE, C-tick, RoHS, ISO9001, ISO14001
Fault Log Last four faults stored with time stamp
Data Logging Output current, drive temperature, DC bus voltage
Monitoring Hours run meter, energy consumption meter
Part Number (without disconnect)
Part Number (with disconnect)
kW
HP
110 – 115V ± 10%, (230VAC 3 Phase Output), 1 Phase Input
TPVG11-½-4N
TPVG11-½-4S
0.37
0.5
TPVG11-1-4N
TPVG11-1-4S
0.75
1.0
TPVG11-1½-4N B
TPVG11-1½-4S B
1.1
1.5
200 – 240VAC ± 10%, 1 Phase Input
TPVG21-½-4N F
TPVG21-½-4S F
0.37
0.5
TPVG21-1-4N F
TPVG21-1-4S F
0.75
1.0
TPVG21-2-4N F
TPVG21-2-4S F
1.5
2.0
TPVG21-2-4N BF
TPVG21-2-4S BF
1.5
2.0
TPVG21-3-4N BF
TPVG21-3-4S BF
2.2
3.0
TPVG21-5-4N B
TPVG21-5-4S BF
4
5.0
200 – 240VAC ± 10%, 3 Phase Input
TPVG23-½-4N
TPVG23-½-4S
0.37
0.5
TPVG23-1-4N
TPVG23-1-4S
0.75
1.0
TPVG23-2-4N
TPVG23-2-4S
1.5
2.0
TPVG23-2-4N BF
TPVG23-2-4S BF
1.5
2.0
TPVG23-3-4N BF
TPVG23-3-4S BF
2.2
3.0
TPVG23-5-4N BF
TPVG23-5-4S BF
4
5.0
380 – 480VAC ± 10%, 3 Phase Input
TPVG43-1-4N F
TPVG43-1-4S F
0.75
1.0
TPVG43-2-4N F
TPVG43-2-4S F
1.5
2.0
TPVG43-2-4N BF
TPVG43-2-4S BF
1.5
2.0
TPVG43-3-4N BF
TPVG43-3-4S BF
2.2
3.0
TPVG43-5-4N BF
TPVG43-5-4S BF
4
5.0
TPVG43-7½-4N BF
TPVG43-7½-4S BF
5.5
7.5
TPVG43-10-4N BF
TPVG43-10-4S BF
7.5
10.0
Output
Current
(A)
Weight
(lbs)
Frame
Size
2.3
4.3
5.8
6.17
6.17
10.14
1
1
2
2.3
4.3
7.0
7.0
10.5
15.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.3
4.3
7.0
7.0
10.5
18.0
6.17
6.17
6.17
10.14
10.14
16.31
1
1
1
2
2
3
2.2
4.1
4.1
5.8
9.5
14.0
18.0
6.17
6.17
10.14
10.14
10.14
16.31
16.31
1
1
2
2
2
3
3
DIMENSIONS
Frame Size
1
2
3
PART NUMBER STRUCTURE
Height
9.13
10.12
12.20
Width
6.34
7.40
8.30
Depth
7.05
7.36
9.64
H
D
W
A decentralized solution.
Many drive applications utilize control panels with complex wiring
taking up large amounts of space. These control panels are often mounted
away from the application requiring long expensive cables and other
hardware to connect the system.
Trans-Power V-Drives provide a decentralized solution where drives can
be located close to the application. Featuring on-board power disconnect,
programmable forward/reverse selector and speed potentiometer, they
allow for localized control.
Everyday Reliability
Expertise
and Support
Powered to Perform
The support only Kaman can provide.
Trans-Power V-Drives are distributed exclusively by
Kaman. That means our drives are backed and
supported by Kaman. The expert support you need
is just a phone call away. And, we have a national
network of over 250 locations and distribution
centers. So the drives you need are always close by,
in stock and ready to ship. Bottom line: we’ll make
sure you get the right drive for your application and
the fast, expert support you deserve.
Built to work as hard as you do.
When you need durable and reliable applied-power
components, depend on Trans-Power. We offer
quality-built, tested and proven components that are
designed to provide the dependable performance
you need for general-purpose applications. Trans-Power
components are available exclusively from Kaman,
one of the United States’ leading distributors of
industrial solutions. With simplified ordering and
off-the-shelf accessibility – plus Kaman’s unmatched
service and technical support – Trans-Power can
be your source for high-value applied-power
components. Whether you need components
for manufacturing, logistics or other commercial
applications, we’re Powered to Perform.
Distributed exclusively by Kaman.
Exceptional Value
800.526.2626
www.transpower.com
© 2015 Kaman Industrial Technologies Corporation. All rights reserved. Form No. 70559 (4/15)
Variable Frequency Drives