Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Partis a.s. Suchovrsice 110 542 32 Úpice Czech Republic User’s guide: computer case Type ML 5xxx,MLI xxx PACKAGE CONTENTS: Computer case with power supply unit, 230V power cord and accessories (mounting accessories, capping strip …) DESCRIPTION AND USE: Computer case is used as a housing for assembly of a personal computer according to ATX standard. It allows you to assembly up to four 5 1/4" drives (CD-ROM …), up to two (according to model number) 3,5” drives (FDD3,5”, card reader …) and up to four 3,5” hard drives (in expansion drive frame, which is optional in two variations). Control buttons are place on the front panel – power and reset, LED diode indicating on-off and HDD activity. Other parts like LCD display or USB, audio (mic + line out) and firewire (IEE1394) connectors are also placed on the front panel, but its appearance and number differs according to model number. ASSEMBLY INSTRUCTIONS: After unpacking the case remove four screws in the back and open both side covers by pushing back and to the side. Components assembling: 1. DRIVE BAYS 5 1/4 and 3,5" bays (after pushing out plastic and metal covers) can be assembled by various drives and further locked by a) screws from the enclosed mounting accessories bag (for CD, FDD use M3 screws, for HDD use 6/32UNC screws) b) plastic clips – after setting clip to drive turn clockwise in the 90° angle. There are three types of the clips for various drives (CD, FDD, HDD). 2. MAINBOARD First screw brass distant stands to the metal MB plate in case (according to the type of motherboard), then mount the mainboard with M3 screws to the brass distant stands through mounting holes. 3. EXPANSION SLOTS It is necessary to remove the appropriate metal bracket before assembling expansion cards (VGA, TV, LAN …). Secure the assembled cards with plastic clip, which is enclosed in the package. Card clip has to be further locked by self-drilling screw from inside. Emptied slots can be recovered with extra metal strips, which are enclosed in the package. 4. CABLES Connect cables with mainboard and drives, wire indications and controls on front panel (connectors are described on its endings), data-cables to drives etc. according to manual of each component. It is necessary to connect LCD display with power supply unit, with cooling fans and to place the temperature probes in appropriate position (use enclosed stickers). 5. FINISHING After locking back the side covers of case connect the computer with all peripherals, plug the 230V power cord and press the power button on front panel. (in case of switching power supply unit move the switcher to ON position) TECHNICAL SPECIFICATION Supply voltage: 230V/50Hz Dimensions: 182x425x475mm CAUTION Dangerous high voltage inside the power supply unit! Refer all difficulties to specialized service. Do not repair yourself! Do not connect power supply unit with components when the power is on.