Download Yr12Ch27 - ChemistryVCE

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Electric battery wikipedia , lookup

Rechargeable battery wikipedia , lookup

Shockley–Queisser limit wikipedia , lookup

Bio-MEMS wikipedia , lookup

Transcript
Worked solutions to textbook questions
Chapter 27 Cells and batteries
Q1.
One major disadvantage of the dry cell was that the zinc casing would begin to
disintegrate if it was left operating in an appliance for several weeks, potentially
causing damage to the appliance. Explain why this occurs.
A1.
In dry cells the zinc forms the casing. Since zinc is oxidised during the cell reaction,
holes may develop in the case and the contents leak out.
Q2.
Although very small alkaline cells can be made, they are not used in watches. Why
are button cells preferred for this application?
A2.
The electronic circuitry in watches requires an almost constant voltage for its
operation. Alkaline cells do not provide a constant voltage, unlike silver–zinc and
mercury–zinc button cells.
Q3.
Write overall equations for the cell reactions in the dry cell, alkaline cell, and lithium
and silver–zinc button cells using the anode and cathode reactions given in the text.
A3.
dry cell: Zn(s) + 2MnO2(s) + 2NH4+(aq)  Zn2+(aq) + Mn2O3(s) + 2NH3(aq) +
H2O(l)
alkaline cell: Zn(s) + 2MnO2(s) + H2O(l)  Zn(OH)2(s) + Mn2O3(s)
lithium cell: Li + MnO2 → LiMnO2
silver–zinc cell: Zn(s) + Ag2O(s) + H2O(l)  Zn(OH)2(s) + 2Ag(s)
Q4.
Describe the energy transformations that occur when a galvanic cell discharges.
A4.
chemical energy  electrical energy  other forms of energy, depending upon the
application for the cell
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
1
Worked solutions to textbook questions
2
Q5.
A galvanic cell is constructed by connecting a Cl2/Cl– half cell to a Zn2+/Zn half cell
using a salt bridge at standard conditions. You will need to refer to Table 26.2
(p. 418).
a Write an overall equation for the cell.
b What is the polarity (positive or negative) of the zinc electrode?
c Calculate the potential difference of the cell.
d What happens to the concentrations of Cl– and Zn2+ ions when electric current is
drawn from the cell?
e Explain the purpose of the salt bridge in the cell.
A5.
a
b
c
d
e
Zn(s) + Cl2(g)  Zn2+(aq) + 2Cl–(aq)
Zinc is oxidised, generating negatively charged electrons. Hence the zinc
electrode is negative.
cell potential difference = higher half cell Eo – lower half cell Eo
= Cl2/Cl– half cell Eo – Zn2+/Zn half cell Eo
= 1.36 – (–0.76) V
= 2.12 V
Both increase as the reaction proceeds in the forward direction until equilibrium
is reached.
Movement of ions through the salt bridge balances charges that are formed in the
half cells during the cell reaction. This movement of charge completes the flow of
current in the circuit.
E1.
Write equations for the reactions that occur at the anode and the cathode of the
sodium–sulfur cell as it discharges.
AE1.
Anode reaction Na(l)  Na+(l) + e–
Cathode reaction S(l) + 2e–  S2–(l)
E2.
Write an overall equation for the cell reaction during:
a discharge
b recharge
AE2.
The overall reaction that occurs when the cell discharges is obtained by adding the
anode and cathode reactions. In this case the anode reaction must first be doubled so
that there equal number of electrons on both sides of the equation
2Na(l) + S(l) + 2e–  S2–(l) + 2Na+(l) + 2e–
This equation simplifies to
2Na(l) + S(l)  S2–(l) + 2Na+(l)
The reverse reaction occurs when the cell is recharged.
S2–(l) + 2Na+(l)  2Na(l) + S(l)
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
3
E3.
Why do you think it is necessary for the cells to be heated in order for them to
produce a voltage?
AE3.
The operation of the cells requires that sodium anode, sulfur cathode and electrolyte
are all in the molten state.
E4.
Provided the cells are discharged and charged every day, they remain at working
temperatures. Suggest the reason for this.
AE4.
During recharging, some of the electrical energy entering the cell is transformed into
chemical energy and some is transformed into heat. Heat energy is also released in the
cell when it discharges. This heat is sufficient to maintain the cell at working
temperatures if a discharge–recharge cycle is carried out every day.
E5.
According to the article, what are the disadvantages of electric vehicles compared
with petrol-driven vehicles at present?
AE5.
Electric vehicles do not generate carbon dioxide, which is a greenhouse gas.
E6.
Suggest the meaning of the term ‘energy density’. Why is energy density an important
factor in the construction of electric vehicles?
AE6.
The energy density of a cell is the energy available per unit mass of the cell. The
greater the energy density of a cell, the greater the range of the electric vehicle that is
using the cell.
E7.
‘Electric vehicles cause no pollution.’ Comment on the accuracy of this statement.
AE7.
While electric vehicles cause almost no pollution at the site at which they are used,
the electrical energy that is used to charge their batteries is produced by a series of
energy transformations that involve the production of pollutants. Typically, fossil
fuels will be burnt in order to produce the electrical energy.
E8.
Suppose your family operated an electric car that used lead–acid batteries. In what
ways would this affect your family’s lifestyle?
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
4
AE8.
Owning an electric car, rather than a petrol-driven car, might restrict your range and
frequency of travel. You would save money by not having to buy petrol, and
maintenance costs (e.g. oil changes, tune-ups) could also decrease, but cost would be
involved in replacing your battery every few years.
Q6.
The pH of the electrolyte in a lead–acid battery varies according to the state of charge.
Describe how the pH would change as a battery discharged and was recharged.
A6.
As a lead–acid battery is discharged, H+ ions are consumed. As the concentration of
H+ drops, the pH of the electrolyte will increase. The opposite occurs when a lead–
acid battery is recharged. As the concentration of H+ increases, the pH will decrease.
Q7.
A lead–acid battery uses 50 g of lead to provide the electrical energy needed to start a
typical car. Calculate the mass of lead oxide consumed at the positive electrode and
the total mass of lead sulfate produced in the battery while starting the car.
A7.
Step 1
Step 2
Step 3
Step 4
Step 5
Write a balanced equation.
Pb(s) + PbO2(s) + 2SO42–(aq) + 4H+(aq)  2PbSO4(s) + 2H2O(l)
From the equation, 1 mol of PbO2 reacts with 1 mol Pb. Use stoichiometry to
calculate the amount of PbO2.
n(PbO 2 )
1
=
1
n(Pb)
n(PbO2)
= n(Pb)
50 g
=
207.19 g mol 1
= 0.24 mol
Calculate the mass of PbO2.
m(PbO2)
= 0.24 mol  239.19 g mol–1
= 57.51 g
= 58 g
From the equation, 2 mol PbSO4 is produced by 1 mol Pb. Use stoichiometry
to calculate the amount of PbSO4.
n(PbSO 4 )
2
=
1
n(Pb)
n(PbSO4)
= 2  n(Pb)
50 g
=2
207.19 g mol 1
= 0.48 mol
Calculate the mass of PbSO4.
m(PbSO4) = 0.48 mol  303.19 g mol–1
= 145.5 g
= 1.5  102 g
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
5
Q8.
A mechanic wishes to recharge a car battery using a battery charger.
a Which battery terminals should the positive and negative terminals of the battery
charger be connected to?
b What would be the effect on the battery if the charger were connected
incorrectly?
A8.
a
b
The positive terminal of the charger is connected to the battery’s positive terminal
and the negative terminal of the charger is connected to the battery’s negative
terminal.
Connecting the battery charger to the battery so that terminals of opposite polarity
are linked will force the spontaneous cell reaction to occur at a faster rate, further
flattening the battery and possibly damaging it irreparably.
Q9.
Why is large-scale production of electricity using fuel cells suggested as part of a
solution to the greenhouse problem?
A9.
Fuel cells are about twice as efficient as coal-fired power stations. Consequently, fuel
cells produce the same quantity of energy using about half as much fuel. Less fuel
means less carbon dioxide gas is produced. As carbon dioxide is a major greenhouse
gas, the use of fuel cells has the potential to reduce the greenhouse effect.
Q10.
The use of hydrogen-powered fuel cells in public transport is being considered in
many cities around the world. What are the advantages and disadvantages of using
fuel cells for this purpose?
A10.
Hydrogen powered fuel cells generate water as the only product and do not generate
noise when in operation. Wide spread use of fuel cells requires extensive new
infrastructure such a generation plant, storage facilities, specialised transport and
distribution outlets.
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
6
Chapter review
Q11.
When constructing a galvanic cell in the laboratory, two separate containers are
generally used for the half cells. However, in commercial cells such as the dry cell, all
the reactants are placed in the one container.
a How are commercial cells constructed so that the use of two containers is
avoided?
b Design a cell that could be constructed in one container in the laboratory and
which uses the same cell reaction as in the Daniell cell (p. 415).
A11.
a
Most commercial cells contain an oxidant and reductant in the form of a solid or
moist powder; each is unable to migrate and react directly with the other. The
electrolyte is usually a paste, allowing ions to move.
b
Q12.
Explain the difference between the terms:
a positive electrode and negative electrode
b cell and battery
c primary cell and secondary cell
d discharge and recharge
A12.
a
b
c
d
The negative electrode anode in a galvanic cell or is the electrode at which
oxidation occurs. The positive electrode or cathode is the electrode at which
reduction occurs.
A battery consists of a number of cells connected together in series.
A primary cell cannot be recharged and is discarded once it no longer supplies
electrical energy. A secondary cell can be connected to a battery charger to
reverse the cell reaction. Once the cell has been recharged, it can again be used to
supply electrical energy.
When a cell discharges chemical energy is converted to electrical energy. When it
is recharged, electrical energy is converted to chemical energy.
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
7
Q13.
What feature enables secondary cells such as lithium ion cells to be recharged?
A13.
In secondary or rechargeable cells such as lithium ion cells or a lead acid battery, the
products of cell reaction remain in contact with the electrodes and are in forms that
can be converted back to reactants.
Q14.
Explain what happens to the oxidant, reductant, anode and cathode when a secondary
cell is switched from discharge to recharge.
A14.
When a cell discharges, oxidation occurs at the anode which has a negative polarity.
Reduction occurs at the cathode which has positive polarity. The oxidation and
reduction reactions in the cell generate electricity. When the cell is recharged the
direction of the electron flow is reversed. An external supply of electricity is required
to reverse these reactions. Oxidation now occurs at the positive electrode while
reduction occurs at the negative electrode.
Q15.
Both dry and alkaline cells use powdered graphite mixed with a manganese dioxide
oxidant. From your knowledge of the properties of graphite, suggest what its role
might be in these cells.
A15.
Graphite is a good conductor of electricity because it contains delocalised electrons
between the layers of carbon atoms. Graphite is incorporated in the cells to conduct
electrons to the manganese dioxide oxidant.
Q16.
Describe an application where each of the following would be used:
a a nickel–metal hydride cell
b a lead–acid accumulator
c a lithium button cell
d a dry cell
e an alkaline cell
A16.
a
b
c
d
e
an appliance that draws a moderate current, e.g. camera flash, portable cassette
player, remote controlled car
starting internal combustion engines in motor bikes, cars, trucks, and buses
an appliance with a small current drain that requires a constant voltage, e.g.
watch, camera, hearing aid, calculator
an infrequently used device that requires a cheap power source, e.g. glove box
torch, transistor radio
an appliance with a moderate to high current drain that is not used extensively,
e.g. electric toothbrush, portable cassette player
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
8
Q17.
A manual car with a flat battery can often be started by pushing, but this is not done
with an automatic car. Find out why a manual car can be started in this way but an
automatic cannot.
A17.
The role of the battery is to turn the starter motor which, in turn, cranks the engine.
Pushing a manual car that has its gears engaged will cause the motor to turn and,
subsequently, cause the alternator to produce an electric current to fire the spark plugs
and start the engine.
An automatic car has no direct coupling between the engine and transmission; a fluid
coupling system is used to drive the transmission when the engine is running.
Q18.
Mains electricity costs about 5 cents per MJ of energy, or less, depending on the tariff.
The cost of the same amount of electrical energy produced by a cell is far more—
about $1300 for a dry cell and even more for a button cell. Why are people prepared
to use cells and pay such relatively high prices for electricity?
A18.
While the cost of electrical energy purchased in the form of a dry cell or button cell is
far higher than the cost of mains electricity, people are prepared to pay the higher
price for the convenience and flexibility of the portable equipment powered by these
cells. Furthermore, the price of individual cells is regarded as relatively low.
Q19.
A car has been powered using an experimental ten-cell aluminium–air battery. Each
of the ten cells contains aluminium plates and sodium hydroxide solution, and air is
fed into the battery. New aluminium plates and water must be added regularly to the
battery.
a Write half equations for the anode and cathode reactions in the battery.
b Draw a diagram to show how each cell might be constructed.
c Give two reasons why this battery weighs less than a similar lead–acid battery.
d Why can this battery be described as a fuel cell?
A19.
a
b
anode: Al(s)  Al3+(aq) + 3e–; cathode: O2(g) + 2H2O(l) + 4e–  4OH–(aq)
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
c
d
9
One reason why an aluminium–air battery weighs less than a similar lead–acid
battery is that the density of aluminium is less than lead. Secondly, the reaction at
the cathode of an aluminium–air battery uses oxygen obtained directly from the
air as it is required, whereas a lead–acid cell must incorporate lead(IV) oxide
around the cathode.
A fuel cell is an electrochemical cell in which the oxidant and reductant are
supplied continuously so that the cell does not flatten. By replacing the
aluminium and adding water and oxygen from the air, an aluminium–air cell will
function as a fuel cell.
Q20.
Preliminary roadside breath tests are often performed by measuring the voltage
produced when a motorist breathes into a small fuel cell. The cell operates like a
hydrogen–oxygen fuel cell, except that ethanol replaces hydrogen. Carbon dioxide is
one of the products formed when the ethanol is oxidised at the anode.
a Predict the anode, cathode and overall reactions in the cell. (Assume the cell
electrolyte is acidic.)
b Would you expect the fuel cell to generate a voltage if natural gas were blown
into the breath inlet? Explain your answer.
A20.
a
b
Anode: CH3CH2OH(g) + 3H2O(l)  2CO2(g) + 12H+(aq) + 12e–
Cathode: O2(g) + 4H+(aq) + 4e–  2H2O(l)
Overall: CH3CH2OH(g) + 3O2(g)  2CO2(g) + 3H2O(1)
Yes. The net cell reaction in the fuel cell is the oxidation of ethanol to form
carbon dioxide and water. Like ethanol, methane in natural gas can be oxidised to
carbon dioxide and water. Provided the electrode materials used in the cell act as
effective catalysts for both reactions, it is likely that the use of natural gas would
produce a voltage.
Q21.
An experimental fuel cell that uses methanol as the fuel has the half equations:
CH3OH(g) + H2O(l) + 6OH–(aq)  CO2(g) + 6H2O(l) + 6e–
O2(g) + 2H2O(1) + 4e–  4OH–(aq)
a Write the equation for the overall cell reaction.
b Which reaction occurs at the positive electrode of the cell?
c Suggest a suitable electrolyte for the cell.
d When the cell begins to produce electricity, the pH of the electrolyte near the
cathode increases and eventually reaches a constant value. Explain why this
occurs.
e Electricity could be obtained from thermal energy produced by combustion of
methanol. What is the main advantage of using a fuel cell to produce electricity?
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
10
A21.
a
b
c
d
e
2CH3OH(g) + 3O2(g)  2CO2(g) + 4H2O(l)
reduction of O2(g)
NaOH(aq) or KOH(aq)
Oxygen is reduced, forming OH– ions at the cathode of the fuel cell, so an
increase in pH occurs at this electrode initially. The OH– ions migrate to the
anode where they are consumed. Once the rate of production of OH– ions at the
cathode becomes equal to the rate at which they depart, the pH near the electrode
will be constant.
A fuel cell converts chemical energy into electrical energy directly, with
relatively little energy being converted into thermal energy. If electrical energy
were obtained by burning methanol (in a process similar to that used to obtain
electrical energy from coal in coal-fired power stations), the energy ‘losses’ of the
various energy transformations involved would be greater. In particular, large
losses occur when thermal energy is converted into mechanical energy.
Q22.
Many of the ‘alkaline cells’ on the market contain zinc electrodes in contact with an
electrolyte containing hydroxide ions. The half-cell reaction might be represented as:
Zn(s) + 4OH–(aq)  Zn(OH)42–(aq) + 2e–
To investigate if the standard electrode potential (E°) of these half cells is the same as
that of a zinc electrode in contact with a zinc nitrate electrolyte, for which the
electrode reaction would be
Zn(s)  Zn2+(aq) + 2e–
a student is provided with the two half cells shown in Figure 27.19, as well as a
Cu2+/Cu half cell.
Figure 27.19
The three half cells.
a
b
Write a net equation for the reaction in a galvanic cell in which the ‘alkaline zinc
half cell’ is connected to the Cu2+/Cu half cell.
Carefully explain how the student could use the half cells that were provided to
determine whether the two different half cells containing zinc had the same E°
value. Include fully labelled diagrams with your answer and explain how the
results could be interpreted.
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
A22.
a
b
Zn(s) + 4OH–(aq) + Cu2+(aq)  Zn(OH)42–(aq) + 2Cu(s)
The student should make two electrochemical cells consisting of
I the Cu2+/Cu half cell and the ‘alkaline zinc half cell’
II the Cu2+/Cu half cell and the Zn2+/Zn half cell
as shown in the diagrams.
The cell voltages should be measured and if they are identical then the two half
cells have the same E0 values (they would not be expected to have the same E0
values).
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
11
Worked solutions to textbook questions
12
Q23.
In the quest for power plants with lower emissions of carbon dioxide, a Victorian
company is developing solid oxide fuel cells (SOFC). Also known as ceramic fuel
cells, the units have a ceramic electrolyte through which oxide ions, O2–, can move.
On the top and bottom of the electrolyte is a thin layer of electrode material. Fuel cells
are designed so that the fuel and air are directed separately onto the appropriate
electrode. The units are arranged in stacks so that high voltages can be generated. The
diagram represents a fuel cell that is using methane gas, CH4, as the energy source.
The direction of electron drift through the external circuit is shown in Figure 27.20.
The electrode reactions are:
O2 + 4e–  2O2–
CH4 + 4O2–  CO2 + 2H2O + 8e–
Figure 27.20
Methane fuel cell.
a
b
c
d
Write an overall equation for the reaction that occurs in this SOFC.
On the diagram, clearly label the positive and negative electrodes.
Explain the claim that this method of generating electricity will reduce carbon
dioxide emissions, by comparison with a power plant that burns natural gas
(containing methane) and uses the heat released to boil water and then generate
electricity.
Why is it necessary to aim for reduced emissions of carbon dioxide from powergenerating facilities?
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
Worked solutions to textbook questions
A23.
a
b
CH4(g) + 2O2(g)  CO2(g) + 2H2O(l)
c
Since fuel cells are more efficient at converting chemical energy to electrical
energy, there will be less CO2 emitted to the atmosphere per joule of energy
generated.
Increased levels of CO2 in the atmosphere are thought to be causing global
warming.
d
Heinemann Chemistry 2 (4th edition)
 Harcourt Education, a division of Pearson Australia Group Pty Ltd
13