Download WC-WCAP3-C - Listen Technologies Corporation

WC-WCAP3-C
The wireless conference access point is the central controller for the wireless conference system. The system shall
use both the 2.4 and 5 GHz frequency range, providing a large number of channels to guarantee a reliable wireless
link at any time. The access point shall be able to be configured to use any combination of available frequencies and
shall be able to automatically or manually switch based on the users preference. The access point shall include a
built-in spectrum scanner that constantly monitors the 4 bands to detect interference sources and identify free
frequencies. The device shall include 128 bit advanced encryption of the wireless data and 3 SMA antenna
connectors.
The wireless conference access point shall include a username and password protected HTTP web server to support
configuration, setup, and control of the wireless system. The built in HTTP web server shall support the most
common used web browsers including: Internet Explorer, Firefox, and Google Chrome. Via the web browser, the
operator shall have the ability to assign names to individual seats and control microphone activity for each
microphone.
The wireless conference access point shall allow for a complete set of network configurations ensuring compatibility
with any IT network.
The wireless conference access point shall offer a secure method of initializing the microphone units of either
automatically or manually assigning each microphone with a seat number.
The wireless conference access point shall include (1) level adjustable ¼” balanced analog input and (1) level
adjustable ¼” balanced output to interface with external audio systems. The device shall incorporate a selectable
distance conferencing (N-1) function to prevent feedback when connected to a video conference system. The access
point shall include a selectable mode to enable an external processor or mixing board to be added to the system. The
device shall include indicators displaying the audio activity and overload.
The wireless conference access point shall be capable of interfacing with wired systems using RJ45 connectors
allowing the wireless and wired system to work seamlessly together.
The system shall support up to 6 open microphones. The system shall support the following Microphone Modes to
fit the users’ specific meeting requirements: Operator, Direct Speak, Request to Speak, VOX, and Group
Discussion.
The system shall support a selectable VOX mode of operation when each microphone will activate when a user
speaks. The device shall include a configurable maximum number of microphones mode to limit the number of
microphones.
The wireless conference access point shall have the following specifications:
Electrical
Supply voltage
Frequency range
Ethernet port
Modulation
Transmitting power
AUX IN
24 DC (+/- 10%)
2400 - 2483.5 MHz
5150 - 5320 MHz
5500 5700 MHz
5725 - 5875 MHz
LAN, TCP/IP
OFDM
< 20 dBM
AUX IN
Nominal input level
MAX. input level
Input impedance
Signal to noise ratio
Frequency response
¼” transformer
balanced
0 dBV
10 dBV
48 kOhm
92 dBA- 10dBV
20 Hz - 15 kHz
AUX OUT
AUX out
AUX OUT
Nominal input level
MAX. input level
Output impedance
Signal to noise ratio
Frequency response
THD+N
¼” transformer
balanced
0 dBV
10 dBV
<= 60 Ohm
92 dBA- 10 dBV
20 Hz - 15 kHz
< 0.05%
¼” transformer
Balanced
Environment
operation
temperature
+5 ... 50 °C
The product specified shall be the Listen Technologies WC-WCAP3-C manufactured by Televic.
WC-CV3-C
The wireless chairman unit shall be equipped with a microphone On/Off or request-to-speak button, two headphone
outputs with a single volume control, and three voting buttons with an OLED voting result information display. The
device shall come with an additional priority, next-in-line, and system volume adjustment buttons to allow control
over participants using the system. The device shall support voting sessions when connected to voting software. The
chairman unit shall include three voting buttons to select yes, no, or abstain. The device shall have a built-in high
quality loudspeaker which is automatically muted when the microphone is active, to prevent acoustic feedback. The
chairman unit shall have the ability to control the overall system volume coming from each of the built-in
loudspeakers within the system.
The unit shall include a red battery status LED to indicate the following:
4h remaining: 1 Hz blinking
2h remaining: 2 Hz blinking
1h remaining: 4 Hz blinking
The unit shall include a blue link status LED to indicate the following:
Off: connection established
Blinking: low link quality
Blue link status LED + Microphone LED blinking at the same time indicates out of range, shutdown after 2 min.
The chairman unit shall use a screw lock socket to connect removable anti-GSM microphone. Both the connected
gooseneck microphone and push-to-talk button shall provide visual feedback (illuminating red LEDs) as to whether
the chairman’s microphone is currently active.
The wireless chairman unit shall have the following specifications:
Electrical
Supply voltage
Audio quality
Power comsumption
RF power output
Battery pack
16 bit digital @ 32 kHz
max 3.5W
< 20 dBm
Microphone (D-MIC40SL)
Audio Delay
Directivity
Sensitivity
Frequency response
Impedance
Microphone pick-up patern
11 ms (STM),
20 ms (ATM)
unidirectional
-43.4 dBV/Pa
130 Hz - 15kHz
680 Ω
cardioid
Speaker
Frequency response
Rated speaker
Power
150 - 20 000 Hz
4W
Display
Frequency response
Rated speaker
Power
OLED 128 x 64 pixels
5mm
Headphone Output
Max. output power
Signal to noise ratio
Frequency response
Headphone load impedance
THD+N
80 mW/ 32Ω
77.5 dBr (A)
100 - 14 000 Hz
> 16 Ω
0.06 % @ 1kHZ in 32Ω load
Environment
operation
temperature
+5 ... 50 °C
Mechanical
Dimensions(in/mm)
Weight (lbs/g)
Color
Part number
9.06/230(w), 5.12/130(h),
2.36/60(d)
1.0/480
RAL9011
WC-CV3-C
71.98.0016
D-MIC40SL
71.98.0053WC-BP
71.98.0042
The product specified shall be the Listen Technologies WC-CV3-C manufactured by Televic.
WC-DD3-C
The wireless delegate unit shall be equipped with a microphone On/Off or request-to-speak button and two
headphone outputs with a single volume control. The device shall have a built-in high quality loudspeaker which is
automatically muted when the microphone is active, to prevent acoustic feedback.
The unit shall include a red battery status LED to indicate the following:
4h remaining: 1 Hz blinking
2h remaining: 2 Hz blinking
1h remaining: 4 Hz blinking
The unit shall include a blue link status LED to indicate the following:
Off: connection established
Blinking: low link quality
Blue link status LED + Microphone LED blinking at the same time indicates out of range, shutdown after 2 min.
The wireless delegate unit shall use a screw lock socket to connect removable anti-GSM microphone. Both the
connected gooseneck microphone and push-to-talk button shall provide visual feedback as to whether the delegate’s
microphone is currently active or in the request queue (red = active, green = in-queue).
The wireless discussion unit shall have the following specifications:
Electrical
Supply voltage
Audio quality
Power comsumption
RF power output
Battery pack
16 bit digital @ 32 kHz
max 3.5W
< 20 dBm
Microphone (D-MIC40SL)
Audio Delay
Directivity
Sensitivity
Frequency response
Impedance
Microphone pick-up patern
11 ms (STM),
20 ms (ATM)
unidirectional
-43.4 dBV/Pa
130 Hz - 15kHz
680 Ω
cardioid
Speaker
Frequency response
Rated speaker
power
150 - 20 000 Hz
4W
Display
Frequency response
Rated speaker
power
Headphone Output
OLED 128 x 64 pixels
5mm
Max. output power
Signal to noise ratio
Frequency response
Headphone load impedance
THD+N
80 mW/ 32Ω
77.5 dBr (A)
100 - 14 000 Hz
> 16 Ω
0.06 % @ 1kHZ in 32Ω load
Environment
operation
temperature
+5 ... 50 °C
Mechanical
Dimensions(in/mm)
Weight (lbs/g)
Color
Part number
9.06/230(w), 5.12/130(h),
2.36/60(d)
1.0/480
RAL9011
WC-DD3-C
71.98.0005
D-MIC40SL
71.98.0053
WC-BP
71.98.0042
WC-CHT
The charging tray shall charge the battery packs for the wireless conference system. The charging tray shall be
capable of charging from 1 to 6 battery packs simultaneously. The device shall be wall, table, or rack-mountable and
be 3 rack units high. The charging tray shall have an auto-ranging power supply and a loop-through main connector
that can support up to 4 chargers daisy-chained together on 110 VAC.
The charging tray shall have the following specifications:
Electrical
Supply voltage
Output power
Output voltage
100-230VAC ± 10%
200W
100-230VAC ± 10%
Mechanical
Dimensions
Weight (g)
Color
Part number
483(w), 132(h), 139(d)
3750
RAL 9011
71.98.0043
Environment
operation
temperature
+5 ... 50 °C
The product specified shall be the Listen Technologies WC-CHT manufactured by Televic
WC-CHC
The transport case shall accommodate 12 delegate or chairman units with battery pack, 12 microphones, 1 wireless
access point and offers the possibility to build-in 2 optional charging trays. The case shall be designed for frequent
use and safe transportation. The case shall have several handles and a high quality trolley to allow easy movement.
The transport case shall have pre-formed foam inlays for all components.
The transport case shall have the following specifications:
Mechanical
Dimensions
Weight (kg)
Color
Part number
360(h) x 710(w) x540(d)
14.6
Black
71.98.0044
The product specified shall be the Listen Technologies WC-CHC manufactured by Televic