Download Scisense Electrophysiology Minimally Invasive Intracardiac Biopotential Measurements for Rodent Models Electrophysiology

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

History of invasive and interventional cardiology wikipedia , lookup

Arrhythmogenic right ventricular dysplasia wikipedia , lookup

Quantium Medical Cardiac Output wikipedia , lookup

Electrocardiography wikipedia , lookup

Transcript
Electrophysiology
Scisense Electrophysiology
Minimally Invasive Intracardiac Biopotential Measurements
for Rodent Models
•Eight electrodes (octopolar) for measuring up to four simultaneous
intracardiac biopotentials
•Stimulate and record from the same Catheter
•Compatible with most biopotential amplifiers and stimulators
RL-200-fly-A4 Rev. B 12/13
Intracardiac Biopotential Measurements
Traditional surface ECG measurements provide total cardiac electrical signal but lack the precision for
detailed signal propagation studies or regional measurements. It is possible to use epicardial surface
electrodes to measure regional electrical potentials; however, it is an invasive procedure. Scisense EP
Catheters offer a minimally invasive means for a more in-depth analysis of biopotential propagation
through the heart.
ELECTROPHYSIOLOGY PARAMETERS
VARIABLE
DESCRIPTION
QR-I
QR Interval
QT-I
QT Interval
RR-I
RR Interval
PR-I
PR Interval
ST-I
ST Interval
ERP
Effective Refractory Periods
QRS
QRS, P Widths
QTD
QT Dispersion
HR
Instantaneous Heart Rate
R-H
R Wave Height
P-H
P Wave Height
T-H
T Wave Height
*Please contact Transonic for a more complete list
of parameters based upon specific analysis software
package being used.
Principles of Operation
Each of the 8 electrodes on a Scisense EP Catheter are
controlled independently by either an Interface Box or
unique Interface Cable. The Interface Box (FI893B) allows
connection to any bioamplifier or stimulator via 2 mm pin
receptacles. This provides the researcher complete control
over which electrodes are used for recording or stimulation
(pacing). In addition, reference pins are provided to achieve
an appropriate ground. Alternatively, an Interface Cable can
be used that terminates in 2 mm pins relating to electrodes
1-8: this is particularly convenient if the bioamplifier or
stimulator has 2 mm pin receptacles (FC-EPPIN8-4). For
those researchers with proprietary connections or a unique
interface on their bioamplifier or stimulator we offer an
Interface Cable with striped ends, allowing you to complete
the connection as desired (FC-EP-OPEN-5).
Considering these options, any commercially available
stimulator or biopotential amplifier can be used in
conjunction with a Scisense EP Catheter. Likewise, any data
acquisition system which is compatible with the stimulator/
bioamplifier may be used to collect and analyze data.
Please Contact Transonic® or your nearest Sales
Representative for suggested third party systems.
Electrophysiology (EP) Catheters
Transonic Scisense offers a 1.1F octapolar (8 electrode) Catheter for use in mice and a 1.6F octapolar
Catheter for use in rats. These Catheters come with a standard ring spacing of 0.5 mm and 1.0 mm,
respectively, but can be customized to suit any specific application. Our octapolar EP Catheters offer
advantages over traditional surface ECG in that you can gain detailed information about the propagation
and timing of atrial and ventricular electrical signals. Up to 4 intracardiac electrograms can be recorded
simultaneously. The same Catheter can be used to pace the heart as well as record electrical activity.
SMOOTH PROFILE:
• Reduces potential damage to endothelial lining during catheterization
• Allows for easy passage through valves (can be inserted and withdrawn repeatedly)
• Ability to pass through remodeled arteries
TUBING MATERIAL:
• Provides ideal balance of flexibility and rigidity, ensuring easy insertion and maneuverability
• Will not fray like many other Catheter materials which, over time, will irritate vascular lining and valves
• Small diameter of tubing minimizes impact on aortic flow, resulting in more physiologic data
APPLICATIONS
• Bundle of His characterization
• SA node characterization
• General signal propagation
• Comparison between basal, medial
and apical regions in the left ventricle
• Endocardial ECG assessment
Endocardial Electrogram recording from right ventricle
(bipolar measurement from electrodes 7 and 8 at the apex)
• Regional atrial assessment
• Conduction studies
• Qualification of cardiac insult
INSERTION & PLACEMENT
• Right Jugular Vein insertion for
placement within the RA or RV
• Right Carotid Artery insertion for
placement within the LV
• Esophageal insertion for placement
beside the heart
Endocardial Electrogram recording from right atrium
(bipolar measurement from electrodes 7 and 8 at the valve)
Electrophysiology
Electrophysiology Control Unit & Cables
ELECTROPHYSIOLOGY CATHETER INTERFACE BOX
INTERFACE CABLE OPTIONS
The Scisense FI893B EP Catheter Interface Box is
a simple device designed to connect a Scisense EP
Catheter to any bioamplifier and/or stimulator.
The Interface Box has eight pin receptacles which
correspond to one of eight electrodes positioned
on the Catheter. A cable from the bioamplifier
and/or stimulator which terminates in a 3 mm pin
connection is then used to connect any single, pair,
or multiple electrodes for recording/stimulating.
• FC-EPEC-4 - Scisense Extension Cable for
Octapolar EP Catheter (Redel-Redel)
• FC-EP-OPEN-5 - Scisense Extension Cable for
Octapolar EP Catheter (Redel-Open End)
• FC-EPPIN8-4 - Scisense Octapolar EP Catheter
Cable (Redel-8x 2mm PIN)
Transonic® carries a selection of third party
stimulators and amplifiers along with acquisition
hardware/software solutions to create a fully
functional cardiac biopotential setup for your
research lab.
OCTAPOLAR CATHETER SPECIFICATIONS
PARAMETER
VALUE
Electrode Dimensions (Mouse)
0.010” or .254 mm wide
0.014” or 0.37 mm diameter
Electrode Dimensions (Rat)
0.010” or 0.254 mm wide
0.025” or 0.635 mm diameter
Electrode Material
80/20 Platinum/Iridium
Catheter Material
Polyimide single lumen
Catheter Color
Black
Catheter Length
18” or 457 mm
Connector
Redel 8 pin. Pin 1= electrode 1
Transonic Systems Inc. is a global manufacturer of innovative biomedical measurement
equipment. Founded in 1983, Transonic sells “gold standard” transit-time ultrasound
flowmeters and monitors for surgical, hemodialysis, pediatric critical care, perfusion,
interventional radiology and research applications. In addition, Transonic provides
pressure and pressure volume systems, laser Doppler flowmeters and telemetry systems.
www.transonic.com
AMERICAS
EUROPE
ASIA/PACIFIC
JAPAN
Transonic Systems Inc.
34 Dutch Mill Rd
Ithaca, NY 14850
U.S.A.
Tel: +1 607-257-5300
Fax: +1 607-257-7256
[email protected]
Transonic Europe B.V.
Business Park Stein 205
6181 MB Elsloo
The Netherlands
Tel: +31 43-407-7200
Fax: +31 43-407-7201
[email protected]
Transonic Asia Inc.
6F-3 No 5 Hangsiang Rd
Dayuan, Taoyuan County
33747 Taiwan, R.O.C.
Tel: +886 3399-5806
Fax: +886 3399-5805
[email protected]
Transonic Japan Inc.
KS Bldg 201, 735-4 Kita-Akitsu
Tokorozawa Saitama
359-0038 Japan
Tel: +81 04-2946-8541
Fax: +81 04-2946-8542
[email protected]