Download IGC82T170S8RM

IGC82T170S8RM
IGBT3 Power Chip
Features:
• 1700V Trench + Field stop technology
• low switching losses
• soft turn off
• positive temperature coefficient
• easy paralleling
This chip is used for:
• power modules
C
Applications:
• drives
G
E
BDTIC
Chip Type
VCE
IC
Die Size
Package
IGC82T170S8RM
1700V
70A
9.10 x 9.06 mm2
sawn on foil
Mechanical Parameters
Raster size
9.10 x 9.06
Emitter pad size (incl. gate pad)
6.88 x 6.88
Gate pad size
0.806 x 1.302
mm2
Area total
82.4
Thickness
190
µm
Wafer size
200
mm
Max.possible chips per wafer
Passivation frontside
Pad metal
320
Photoimide
3200 nm AlSiCu
Ni Ag –system
suitable for epoxy and soft solder die bonding
Backside metal
Die bond
Electrically conductive glue or solder
Wire bond
Al, <500µm
∅ 0.65mm ; max 1.2mm
Reject ink dot size
Recommended storage environment
Store in original container, in dry nitrogen, in dark
environment, < 6 month at an ambient temperature of 23°C
Edited by INFINEON Technologies, AIM PMD D CID CLS, L7763O, Edition 0.9, 29.05.2008
www.BDTIC.com/infineon
IGC82T170S8RM
Maximum Ratings
Parameter
Symbol
Value
Unit
1700
V
1)
A
Collector-Emitter voltage, Tvj =25 °C
VCE
DC collector current, limited by Tvj, max
IC
Pulsed collector current, tp limited by Tvj, max
Ic,puls
210
A
Gate emitter voltage
VGE
±20
V
Junction temperature range
Tvj
-40 ... +175
°C
Operating junction temperature
Tvj
-40...+150
°C
tSC
10
µs
BDTIC
Short circuit data
2)
VGE = 15V, VCC = 1000V, Tvj = 150°C
I C , m a x = 140A, V C E , m a x = 1700V
Reverse bias safe operating area 2 ) (RBSOA)
Tvj ≤ 1 5 0 °C
1)
depending on thermal properties of assembly
2)
not subject to production test - verified by design/characterization
Static Characteristics (tested on wafer), Tvj =25 °C
Parameter
Symbol
Conditions
Value
min.
typ.
max.
Unit
Collector-Emitter breakdown voltage
V(BR)CES
VGE=0V , IC= 2 mA
1700
Collector-Emitter saturation voltage
VCE(sat)
VGE=15V, IC=70A
1.6
1.9
2.2
Gate-Emitter threshold voltage
VGE(th)
IC=2.8mA , VGE=VCE
5.2
5.8
6.4
Zero gate voltage collector current
ICES
VCE=1700V , VGE=0V
2
µA
Gate-Emitter leakage current
IGES
VCE=0V , VGE=20V
300
nA
Integrated gate resistor
rG
V
Ω
16
Dynamic Characteristics (not subject to production test - verified by design / characterization), Tvj =25 °C
Parameter
Symbol
Conditions
Value
min.
typ.
Input capacitance
Cies
V C E =25V,
5500
Output capacitance
Coes
VGE=0V,
230
Reverse transfer capacitance
Cres
f=1MHz
180
Edited by INFINEON Technologies, AIM PMD D CID CLS, L7763O, Edition 0.9, 29.05.2008
www.BDTIC.com/infineon
max.
Unit
pF
IGC82T170S8RM
Further Electrical Characteristics
Switching characteristics and thermal properties are depending strongly on module design and mounting
technology and can therefore not be specified for a bare die.
BDTIC
Edited by INFINEON Technologies, AIM PMD D CID CLS, L7763O, Edition 0.9, 29.05.2008
www.BDTIC.com/infineon
IGC82T170S8RM
Chip Drawing
BDTIC
E
E
E
E
T
G
E = Emitter
G = Gate
T = Test pad do not contact
Edited by INFINEON Technologies, AIM PMD D CID CLS, L7763O, Edition 0.9, 29.05.2008
www.BDTIC.com/infineon
IGC82T170S8RM
Description
AQL 0,65 for visual inspection according to failure catalogue
Electrostatic Discharge Sensitive Device according to MIL-STD 883
Revision History
Version
Subjects (major changes since last revision)
Date
BDTIC
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2008 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or
any information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the
types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies
components may be used in life-support devices or systems only with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of
that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.
Edited by INFINEON Technologies, AIM PMD D CID CLS, L7763O, Edition 0.9, 29.05.2008
www.BDTIC.com/infineon