Download Micro AC Crane Drive

Micro AC Crane Drive
• Crane specific software
allows for start-up in
15 minutes or less
• Pre-configured reference
options result in simple
and uniform setup from
job to job:
– Up to five fixed speeds
– Two-step infinitely variable
– Stepless 0-10 VDC & 4-20mA
• Built-in protective features
increase crane reliability
and up-time:
– High precision current detection
– Full overload protection
– Overvoltage/overcurrent stall
protection
– Short circuit protection
– Reset after fault
– Motor overheat protection
• Units can be mounted
side-by-side, reducing panel
space requirements by 10%
ACCel30™ Micro AC Crane Drive
Avtron’s ACCel30™ AC drive provides
crane travel and open loop hoist
control using FastDrive™ software
technology – commissioning is completed quickly in 15 minutes or less.
Its compact, modular design, and its
high-efficiency cooling system allow
several ACCel30™ drives to be stacked
together to significantly reduce panel
space requirements for multi-motion
applications. Optional DIN rail mounting kits reduce installation times.
The ACCel30™ AC drive’s rugged
design stands up to the demanding
environment of a crane. It meets CMAA
BULLETIN 492 REV. -
class A, B, C, D, and E service requirements for cranes, and it carries a 50°C
ambient rating.
Several standard industrial communication options provide a powerful complement to the standard drive package.
By using protocols such as DeviceNet,
Profibus, or CANopen, the ACCel30™
drive can be integrated into larger
or automated systems with Radio
Controllers, PLC’s, and Sway Controls.
All drive models have a built-in brake
chopper, reducing wiring cost and
panel space. An optional external
resistor is available to provide braking
capabilities. Several ACCel30™ drives
can be tied together through the DC
bus, enabling multiple drives to share
regenerative energy, resulting in overall
energy savings.
The ACCel30™ drive is available in ratings from 0.25 to 20 hp @ 230 VAC, and
0.5 to 30 hp @ 460 VAC.
Each drive is supplied with a keypad for
easy configuration and troubleshooting
by technicians.
Built-in, 120 VAC inputs require no
external adapters.
QUALITY SYSTEM CERTIFIED TO ISO 9001
www.avtronautomation.com
Micro AC Crane Drive
Specifications at a Glance
OUTPUT RATINGS
MICRO DRIVE FEATURES
DESCRIPTION
SPECIFICATION
Skip Frequency
Three Zones, setting range 0-600 Hz
Accel/Decel Time
0.1-600 seconds (2 independent setting of accel/decel time)
Stall Prevention Level
Setting 20-250% of rated current
DC Braking
Operation frequency 0.1-600.0 Hz, output 0-100% rated current
Start time 0-60 seconds, stop time 0-60 seconds
Regenerated Braking Torque up to 125% possible with optional brake resistor
DESCRIPTION
SPECIFICATION
Rated Voltage
200-240V or 380-480V, 3Ø, 50/60 Hz
Ambient
Temperature Ratings
Ambient temperature max. +122°F (+50°C), single
Ambient temperature max. +104°F (+40°C), side-by-side
Overload Current
150% 1 minute
Output Frequency
0.1-600 Hz
Frequency Resolution
0.01 Hz
Initial Output Current
150% rated for 1 minute
Control Method
SPWM (Sinusoidal/Pulse with Modulation)
Control (V/F or Sensorless Vector)
Switching Frequency
8 KHz default, 1-15 KHz selectable
Digital Inputs
Qty. (6) six, 120 VAC inputs (24 VDC optional)
Digital Output
Qty. (1) one, form C output
Analog Inputs
Qty (1) one, 0-10 VDC/4-20mA analog input
OPTION CARDS
Analog Output
Qty. (1) one, 0-10 VDC analog output
DESCRIPTION
SPECIFICATION
Alarm Output
Contact will be On when drive malfunctions
(1 open collector output)
DeviceNet
Communication Fieldbus module that provides DeviceNet
communication to the drive
Protection Functions
Overvoltage, overcurrent, undervoltage, undercurrent, external
fault, overload, ground fault, overheating, electronic thermal,
IGBT short circuit, PTC
PROFIBUS
Communication Fieldbus module that provides PROFIBUS-DP
communication to the drive
CANopen
Communication Fieldbus module that provides CANopen
communication to the drive
Display Keypad
6-key, 7-segment LED with 4-digit, 5 status LED, master
frequency, output frequency, output current, custom units,
parameter values for set-up and lock, faults, RUN, STOP,
RESET, FWD/REV
Relay Output 1
Provides an additional 3 form A/NO contacts*
Relay Output 2
Provides an additional 2 form C/Change over contacts*
Digital I/O
Provides additional photocoupler I/O (3 in and 3 out)*
Analog Card
Provides an analog input with 12 bit resolution*
Encoder Card
Provides option to bring in an encoder input to the drive for
monitoring * (not for closed loop feedback)
USB Card
Provides a second serial communication card to the drive*
Enclosure Rating
IP20
Altitude
0-1000m
Vibration
9.80665m/s2 (1G) less than 20 Hz, 5.88m/s2 (0.6G) at 20-50 Hz
Approvals
UL, CUL
* Option cards are only available on 24VDC input version of drive.
Available Ratings
Voltage Class
230 VAC
Frame
A
B
D
0.2
0.4
0.75
1.5
2.2
3.7
5.5
7.5
11.0
15.0
Max. Applicable Motor Output (HP)
0.25
0.5
1.0
2.0
3.0
5.0
7.5
10.0
15.0
20.0
Rated Output Capacity (KVA)
0.6
1.0
1.6
2.9
4.2
6.5
9.5
12.5
17.1
25.0
Rated Output Current (A)
1.6
2.5
4.2
7.5
11.0
17.0
25.0
33.0
45.0
65.0
1.2
1.9
1.9
3.57
6.6
Cooling Method
Natural Cooling
Weight (kg)
1.1
Approx. Dimensions in inches (H x W x D)
1.1
1.1
Fan Cooling
5.6 x 2.8 x 6.0
3.5
6.9 x 3.9 x 6.0
Voltage Class
3.5
10.2 x 5.1 x 6.7
11.4 x 7.9 x 7.5
460 VAC
Frame
ACCel30™ AC Micro Drive
with front cover removed.
(Frame A shown)
C
Max. Applicable Motor Output (kW)
A
B
C
D
Max. Applicable Motor Output (kW)
0.4
0.75
1.5
2.2
3.7
5.5
7.5
11.0
15.0
18.5
22.0
Max. Applicable Motor Output (HP)
0.5
1.0
2.0
3.0
5.0
7.5
10.0
15.0
20.0
25.0
30.0
Rated Output Capacity (KVA)
1.2
2.0
3.3
4.4
6.8
9.9
13.7
18.3
24.0
29.0
34.0
1.5
2.5
4.2
5.5
8.2
13.0
18.0
24.0
32.0
38.0
45.0
4.2
7.47
7.47
7.47
Rated Output Current (A)
Cooling Method
Natural Cooling
Weight (kg)
1.2
Approx. Dimensions in inches (H x W x D)
1.2
Fan Cooling
1.2
5.6 x 2.8 x 6.0
1.9
1.9
6.9 x 3.9 x 6.0
4.2
4.2
10.2 x 5.1 x 6.7
11.4 x 7.9 x 7.5
Specifications and features are subject to change without notice. All dimensions are in inches.
ACCel30™ and FastDrive™ are trademarks of Avtron Industrial Automation, Inc.
7900 E. Pleasant Valley Road, Independence, OH 44131 • (216) 642-1230 • FAX: (216) 642-6037 • E-MAIL: [email protected] • www.avtronautomation.com