Download BDTIC TLE7257SJ Basic LIN Transceiver starting up in Sleep Mode

Product Brief
TLE7257SJ
BDTIC
Basic LIN Transceiver starting up in Sleep Mode
The TLE7257SJ is a transceiver for the Local Interconnect Network (LIN) with integrated
wake-up and protection features. It is designed for in-vehicle networks, using data
transmission rates up to 20kbps. The TLE7257SJ operates as a bus driver between the
protocol controller and the physical bus of the LIN network. Compliant to all LIN standards and with a wide operational voltage supply range, the TLE7257SJ can be used in
all automotive applications.
Key Features
The usage of different operation modes and the INH output allows the TLE7257SJ to
control external components like e.g. voltage regulators. In sleep mode the TLE7257SJ
draws typically less than 10μA of quiescent current while still being able to wake-up
when detecting LIN bus traffic. The very low leakage current on the BUS pin makes the
TLE7257SJ especially suitable for partially supplied networks.
„„ Worldwide OEM approval
„„ Data rates up to 20kBaud
„„ Compliant to ISO 17987-4, LIN
Specification 2.2A and SAE J2602
„„ Very high ESD robustness of ±10kV
according IEC61000-4-2 and HBM
„„ Low electromagnetic emission
„„ High immunity against EMI
„„ Very low current consumption in
sleep mode (10µA)
„„ Digital I/O levels compatible for
The TLE7257SJ provides excellent ESD robustness together with a very high electromagnetic compatibility (EMC). It reaches a very low level of electromagnetic emission
(EME) within a broad frequency range and independent from the battery voltage. The
TLE7257SJ is AEC qualified and tailored to withstand the harsh conditions of the automotive environment.
3.3V and 5V microcontrollers
„„ INH output to control external
voltage regulator
„„ Bus short to VBAT protection and
Bus short to GND handling
„„ AEC Qualified
Applications
„„ Body Controllers and Gateway Modules
„„ Switch panels
„„ Wiper or window lift modules
„„ Door and Seat Control Modules
„„ Engine Management Units
www.infineon.com
www.BDTIC.com/infineon
Product Brief
TLE7257SJ
Basic LIN Transceiver starting up in Sleep Mode
Block Diagram TLE7257SJ
VS
7
8
Supply
VREF
2
Mode Control
VREF
Output
Stage
RSlave
Bus
6
Driver
INH
EN
REN
TxD Input
Temp.Protection
Current
Limit
4
Timeout
TxD
BDTIC
Receiver
Wake and Bus
Comparator
N.C.
3
1
RxD
Filter
Filter
5
GND
Application Example: Roof Control Module
16/32-bit
Microcontroller
XC22xx
Alternatively:
CAN Transceiver
TLE6251-3G
TLE6251D
CAN Bus
Communication
LIN
TLE7257SJ
LED Driver
LIN Bus
Communication
Linear VREG
TLE46xx
TLE42xx4
TLE727x-2
Supply
+12V from
Battery
Sunroof Control
Sunroof
NovalithIC™
Power Half Bridge
BTN79xxB
BTN89xxTA1)
M
Position Sensor
TLE4966
TLE4961-3
Trilith IC
BTM7740G
M
Sunblind
Power LED Driver
TLD5085EJ
TLD5045EJ
Reading
Light
LED Driver
without Status
BCR40x
SPIDER
TLE72xx
Interior
Light
LIN Transceiver
TLE7259-2GE
TLE7258LE
LIN Bus
+12V
LIN LED
TLD730xEK
RGB
Ambient
Light
LIN LED
TLD730xEK
RGB
Ambient
Light
+12V
1) In development, samples available
Attention please!
The information given in this document shall in no event
be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples
or hints given herein, any typical values stated herein and/
or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation
warranties of non-infringement of intellectual property
rights of any third party.
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2013 Infineon Technologies AG.
All Rights Reserved.
Visit us:
www.infineon.com
Order Number: B124-H9852-X-X-7600
Date: 11 / 2013
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only
be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause
the failure of that life-support device or system, or to affect
the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons
may be endangered.
www.BDTIC.com/infineon