Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Low Capacitance, Low Charge Injection, ±15 V/+12 V iCMOS™ Quad SPST Switches ADG1211/ADG1212/ADG1213 FUNCTIONAL BLOCK DIAGRAM 1 pF off capacitance 2.6 pF on capacitance <1 pC charge injection 33 V supply range 120 Ω on resistance Fully specified at ±15 V, +12 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 16-lead TSSOP and 16-lead LFCSP Typical power consumption: <0.03 μW S1 IN1 IN1 D1 D1 S2 S2 IN2 IN2 ADG1211 D2 ADG1212 S2 D2 D2 ADG1213 S3 IN3 S3 IN3 D3 D3 S4 S4 IN4 IN4 D1 IN2 S3 IN3 S1 S1 IN1 D3 S4 IN4 D4 D4 D4 SWITCHES SHOWN FOR A LOGIC 1 INPUT 04778-001 FEATURES Figure 1. APPLICATIONS Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Audio signal routing Video signal routing Communication systems iCMOS construction ensures ultralow power dissipation, making the parts ideally suited for portable and batterypowered instruments. www.BDTIC.com/ADI GENERAL DESCRIPTION The ADG1211/ADG1212/ADG1213 are monolithic complementary metal-oxide semiconductor (CMOS) devices containing four independently selectable switches designed on an iCMOS (industrial CMOS) process. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no previous generation of high voltage parts has been able to achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can tolerate high supply voltages while providing increased performance, dramatically lower power consumption, and reduced package size. The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-andhold applications, where low glitch and fast settling are required. Fast switching speed coupled with high signal bandwidth make the parts suitable for video signal switching. The ADG1211/ADG1212/ADG1213 contain four independent single-pole/single-throw (SPST) switches. The ADG1211 and ADG1212 differ only in that the digital control logic is inverted. The ADG1211 switches are turned on with Logic 0 on the appropriate control input, while Logic 1 is required for the ADG1212. The ADG1213 has two switches with digital control logic similar to that of the ADG1211; the logic is inverted on the other two switches. The ADG1213 exhibits break-beforemake switching action for use in multiplexer applications. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. PRODUCT HIGHLIGHTS 1. 2. 3. 4. 5. 6. Ultralow capacitance. <1 pC charge injection. 3 V logic-compatible digital inputs: VIH = 2.0 V, VIL = 0.8 V. No VL logic power supply required. Ultralow power dissipation: <0.03 μW. 16-lead TSSOP and 3 mm × 3 mm LFCSP packages. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved. ADG1211/ADG1212/ADG1213 TABLE OF CONTENTS Specifications..................................................................................... 3 Terminology .......................................................................................8 Dual Supply ................................................................................... 3 Typical Performance Characteristics ..............................................9 Single Supply ................................................................................. 5 Test Circuits..................................................................................... 12 Absolute Maximum Ratings............................................................ 6 Outline Dimensions ....................................................................... 14 ESD Caution.................................................................................. 6 Ordering Guide .......................................................................... 15 Pin Configurations and Function Descriptions ........................... 7 REVISION HISTORY 7/05—Revision 0: Initial Version www.BDTIC.com/ADI Rev. 0 | Page 2 of 16 ADG1211/ADG1212/ADG1213 SPECIFICATIONS DUAL SUPPLY VDD = 15 V ± 10%, VSS = −15 V ± 10%, GND = 0 V, unless otherwise noted. Table 1. Parameter ANALOG SWITCH Analog Signal Range On Resistance (RON) 25°C Y Version 1 −40°C to +85°C −40°C to +125°C VDD to VSS On Resistance Match Between Channels (∆RON) On Resistance Flatness (RFLAT(ON)) 120 190 2.5 6 20 57 230 260 10 11 72 79 Unit Test Conditions/Comments V Ω typ Ω max Ω typ VS = ±10 V, IS = −1 mA; Figure 20 VDD = +13.5 V, VSS = −13.5 V VS = ±10 V, IS = −1 mA Ω max Ω typ Ω max VS = −5 V/0 V/+5 V; IS = −1 mA nA typ VS = ±10 V, VD = ∓10 V; Figure 21 VS = ±10 V, VD = ∓10 V; Figure 21 LEAKAGE CURRENTS Source Off Leakage, IS (Off) ±0.02 ±0.1 ±0.02 ±0.6 ±1 Drain Off Leakage, ID (Off) nA max nA typ ±0.1 ±0.02 ±0.1 ±0.6 ±1 VS = VD = ±10 V; Figure 22 ±0.6 ±1 nA max nA typ nA max V min V max μA typ μA max pF typ VIN = VINL or VINH ns typ ns max ns typ ns max ns typ ns min pC typ dB typ dB typ % typ MHz typ pF typ pF max pF typ pF max pF typ pF max RL = 300 Ω, CL = 35 pF VS = 10 V; Figure 23 RL = 300 Ω, CL = 35 pF VS = 10 V; Figure 23 RL = 300 Ω, CL = 35 pF VS1 = VS2 = 10 V; Figure 24 VS = 0 V, RS = 0 Ω, CL = 1 nF; Figure 25 RL = 50 Ω, CL = 5 pF, f = 1 MHz; Figure 26 RL = 50 Ω, CL = 5 pF, f = 1 MHz; Figure 27 RL = 10 kΩ, 5 V rms, f = 20 Hz to 20 kHz RL = 50 Ω, CL = 5 pF; Figure 28 VS = 0 V, f = 1 MHz VS = 0 V, f = 1 MHz VS = 0 V, f = 1 MHz VS = 0 V, f = 1 MHz VS = 0 V, f = 1 MHz VS = 0 V, f = 1 MHz Channel On Leakage, ID, IS (On) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current, IINL or IINH VDD = +16.5 V, VSS = −16.5 V www.BDTIC.com/ADI 2.0 0.8 0.005 ±0.1 Digital Input Capacitance, CIN DYNAMIC CHARACTERISTICS 2 tON tOFF Break-Before-Make Time Delay, tD (ADG1213 Only) Charge Injection Off Isolation Channel-to-Channel Crosstalk Total Harmonic Distortion + Noise −3 dB Bandwidth CS (Off) CD (Off) CD, CS (On) 2.5 105 125 40 50 25 160 185 60 60 10 −0.3 80 90 0.15 1000 0.9 1.1 1 1.2 2.6 3 Rev. 0 | Page 3 of 16 ADG1211/ADG1212/ADG1213 Parameter POWER REQUIREMENTS IDD 25°C Y Version 1 −40°C to +85°C −40°C to +125°C 0.001 1.0 IDD 220 320 ISS 0.001 1.0 ISS 0.001 1.0 1 2 Unit μA typ μA max μA typ μA max μA typ μA max μA typ μA max Test Conditions/Comments VDD = +16.5 V, VSS = −16.5 V Digital inputs = 0 V or VDD Digital inputs = 5 V Digital inputs = 0 V or VDD Digital inputs = 5 V Temperature range for Y version is −40°C to +125°C. Guaranteed by design, not subject to production test. www.BDTIC.com/ADI Rev. 0 | Page 4 of 16 ADG1211/ADG1212/ADG1213 SINGLE SUPPLY VDD = 12 V ± 10%, VSS = 0 V, GND = 0 V, unless otherwise noted. Table 2. Parameter ANALOG SWITCH Analog Signal Range On Resistance (RON) 25°C −40°C to +125°C 0 V to VDD On Resistance Match Between Channels (∆RON) On Resistance Flatness (RFLAT(ON)) LEAKAGE CURRENTS Source Off Leakage, IS (Off) Drain Off Leakage, ID (Off) Channel On Leakage, ID, IS (On) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current, IINL or IINH Y Version 1 −40°C to +85°C 300 475 4.5 12 60 ±0.02 ±0.1 ±0.02 ±0.1 ±0.02 ±0.1 567 625 26 27 ±0.6 ±1 ±0.6 ±1 ±0.6 ±1 2.0 0.8 Digital Input Capacitance, CIN DYNAMIC CHARACTERISTICS 2 tON tOFF Break-Before-Make Time Delay, tD (ADG1213 Only) Charge Injection Off Isolation Channel-to-Channel Crosstalk −3 dB Bandwidth CS (Off) CD, CS (On) POWER REQUIREMENTS IDD 3 120 155 45 65 50 190 225 75 85 10 0 80 90 900 1.2 1.4 1.3 1.5 3.2 3.9 0.001 1.0 IDD 220 320 1 2 Test Conditions/Comments V Ω typ Ω max Ω typ VS = 0 V to 10 V, IS = −1 mA; Figure 20 VDD = 10.8 V, VSS = 0 V VS = 0 V to 10 V, IS = −1 mA Ω max Ω typ nA typ nA max nA typ nA max nA typ nA max V min V max μA typ μA max pF typ VS = 3 V/6 V/9 V, IS = −1 mA VDD = 13.2 V, VSS = 0 V VS = 1 V/10 V, VD = 10 V/1 V; Figure 21 VS = 1 V/10 V, VD = 10 V/1 V; Figure 21 VS = VD = 1 V or 10 V; Figure 22 www.BDTIC.com/ADI 0.001 ±0.1 CD (Off) Unit Temperature range for Y version is −40°C to +125°C. Guaranteed by design, not subject to production test. Rev. 0 | Page 5 of 16 ns typ ns max ns typ ns max ns typ ns min pC typ dB typ dB typ MHz typ pF typ pF max pF typ pF max pF typ pF max μA typ μA max μA typ μA max VIN = VINL or VINH RL = 300 Ω, CL = 35 pF VS = 8 V; Figure 23 RL = 300 Ω, CL = 35 pF VS = 8 V; Figure 23 RL = 300 Ω, CL = 35 pF VS1 = VS2 = 8 V; Figure 24 VS = 6 V, RS = 0 Ω, CL = 1 nF; Figure 25 RL = 50 Ω, CL = 5 pF, f = 1 MHz; Figure 26 RL = 50 Ω, CL = 5 pF, f = 1 MHz; Figure 27 RL = 50 Ω, CL = 5 pF; Figure 28 VS = 6 V, f = 1 MHz VS = 6 V, f = 1 MHz VS = 6 V, f = 1 MHz VS = 6 V, f = 1 MHz VS = 6 V, f = 1 MHz VS = 6 V, f = 1 MHz VDD = 13.2 V Digital inputs = 0 V or VDD Digital inputs = 5 V ADG1211/ADG1212/ADG1213 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 3. Parameter VDD to VSS VDD to GND VSS to GND Analog Inputs 1 Digital Inputs1 Peak Current, S or D Continuous Current per Channel, S or D Operating Temperature Range Automotive (Y Version) Storage Temperature Range Junction Temperature 16-Lead TSSOP, θJA Thermal Impedance (4-Layer Board) 16-Lead LFCSP, θJA Thermal Impedance Reflow Soldering Peak Temperature, Pb free 1 Rating 35 V −0.3 V to +25 V +0.3 V to −25 V VSS – 0.3 V to VDD + 0.3 V or 30 mA, whichever occurs first GND – 0.3 V to VDD + 0.3 V or 30 mA, whichever occurs first 100 mA (pulsed at 1 ms, 10% duty cycle max) 25 mA Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time. Table 4. ADG1211/ADG1212 Truth Table ADG1211 INx 0 1 −40°C to +125°C −65°C to +150°C 150°C 112°C/W ADG1212 INx 1 0 Switch Condition On Off Table 5. ADG1213 Truth Table ADG1213 INx 0 1 72.7°C/W Switch 1, 4 Off On 260°C www.BDTIC.com/ADI Overvoltages at IN, S, or D are clamped by internal diodes. Current should be limited to the maximum ratings given. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. 0 | Page 6 of 16 Switch 2, 3 On Off ADG1211/ADG1212/ADG1213 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS IN2 S1 1 D1 2 15 D2 VSS 2 14 S2 13 VDD GND 5 12 NC S4 6 11 S3 D4 7 10 D3 IN4 8 9 IN3 ADG1211/ ADG1212/ ADG1213 TOP VIEW NC = NO CONNECT S4 4 Mnemonic IN1 D1 S1 VSS GND S4 D4 IN4 IN3 D3 S3 NC VDD S2 D2 IN2 14 IN2 13 D2 9 S3 NC = NO CONNECT Figure 3. LFCSP Pin Configuration Table 6. Pin Function Descriptions Pin No. LFCSP 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 11 VDD 10 NC NOTES 1. EXPOSED PAD TIED TO SUBSTRATE, VSS. Figure 2. TSSOP Pin Configuration TSSOP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 12 S2 Description Logic Control Input. Drain Terminal. Can be an input or output. Source Terminal. Can be an input or output. Most Negative Power Supply Potential. Ground (0 V) Reference. Source Terminal. Can be an input or output. Drain Terminal. Can be an input or output. Logic Control Input. Logic Control Input. Drain Terminal. Can be an input or output. Source Terminal. Can be an input or output. No Connection. Most Positive Power Supply Potential. Source Terminal. Can be an input or output. Drain Terminal. Can be an input or output. Logic Control Input. www.BDTIC.com/ADI Rev. 0 | Page 7 of 16 04778-003 4 TOP VIEW (Not to Scale) D4 5 VSS GND 3 04788-002 S1 3 PIN 1 INDICATOR D3 8 16 IN3 7 1 IN4 6 IN1 15 IN1 16 D1 ADG1211/ADG1212/ADG1213 ADG1211/ADG1212/ADG1213 TERMINOLOGY IDD The positive supply current. CD, CS (On) The on switch capacitance, measured with reference to ground. ISS The negative supply current. CIN The digital input capacitance. VD (VS) The analog voltage on Terminals D and S. tON The delay between applying the digital control input and the output switching on. See Figure 23. RON The ohmic resistance between D and S. RFLAT(ON) Flatness is defined as the difference between the maximum and minimum value of on resistance, as measured over the specified analog signal range. IS (Off) The source leakage current with the switch off. ID (Off) The drain leakage current with the switch off. ID, IS (On) The channel leakage current with the switch on. tOFF The delay between applying the digital control input and the output switching off. See Figure 23. Charge Injection A measure of the glitch impulse transferred from the digital input to the analog output during switching. Off Isolation A measure of unwanted signal coupling through an off switch. Crosstalk A measure of unwanted signal that is coupled through from one channel to another as a result of parasitic capacitance. www.BDTIC.com/ADI VINL The maximum input voltage for Logic 0. VINH The minimum input voltage for Logic 1. IINL (IINH) The input current of the digital input. CS (Off) The off switch source capacitance, measured with reference to ground. Bandwidth The frequency at which the output is attenuated by 3 dB. On Response The frequency response of the on switch. Insertion Loss The loss due to the on resistance of the switch. THD + N The ratio of the harmonic amplitude plus noise of the signal to the fundamental. CD (Off) The off switch drain capacitance, measured with reference to ground. Rev. 0 | Page 8 of 16 ADG1211/ADG1212/ADG1213 TYPICAL PERFORMANCE CHARACTERISTICS 200 250 VDD = +15V VSS = –15V TA = +25°C 180 VDD = +13.5V VSS = –13.5V 200 140 ON RESISTANCE (Ω) 120 100 VDD = +15V VSS = –15V 80 VDD = +16.5V VSS = –16.5V 60 40 TA = +125°C 150 TA = +85°C 100 04778-008 50 20 0 –18 –15 –12 –9 –6 –3 0 3 6 9 SOURCE OR DRAIN VOLTAGE (V) 12 15 0 –15 18 –10 –5 0 5 SOURCE OR DRAIN VOLTAGE (V) 10 15 Figure 7. On Resistance as a Function of VD (VS) for Different Temperatures, Dual Supply Figure 4. On Resistance as a Function of VD (VS) for Dual Supply 450 600 TA = +25°C VDD = +12V VSS = 0V 400 TA = +125°C 500 350 TA = +85°C ON RESISTANCE (Ω) ON RESISTANCE (Ω) TA = +25°C TA = –40°C 04778-006 ON RESISTANCE (Ω) 160 VDD = +5.5V VSS = –5.5V 300 250 400 300 www.BDTIC.com/ADI 200 150 200 TA = –40°C 100 TA = +25°C 50 0 –5 –4 –3 –2 –1 0 1 2 3 SOURCE OR DRAIN VOLTAGE (V) 4 04778-007 04778-004 100 0 0 5 Figure 5. On Resistance as a Function of VD (VS) for Dual Supply 4 6 8 SOURCE OR DRAIN VOLTAGE (V) 10 12 Figure 8. On Resistance as a Function of VD (VS) for Different Temperatures, Single Supply 0.20 450 TA = 25°C 400 ID, IS (ON) 0.10 LEAKAGE (nA) 300 250 VDD = 13.2V VSS = 0V 200 VDD = +15V VSS = –15V VBIAS = +10V/–10V 0.15 VDD = 12V VSS = 0V VDD = 10.8V VSS = 0V 350 0.05 ID (OFF) 0 –0.05 IS (OFF) 150 –0.10 100 50 0 0 2 4 6 8 10 SOURCE OR DRAIN VOLTAGE (V) –0.20 0 12 Figure 6. On Resistance as a Function of VD (VS) for Single Supply 04778-012 –0.15 04778-005 ON RESISTANCE (Ω) 2 20 40 60 80 TEMPERATURE (°C) 100 120 Figure 9. Leakage Currents as a Function of Temperature, Dual Supply Rev. 0 | Page 9 of 16 ADG1211/ADG1212/ADG1213 200 0.30 VDD = 12V VSS = 0V VBIAS = 1V/10V 0.25 180 12V SS TON 160 0.20 140 TIME (ns) LEAKAGE (nA) ID, IS (ON) 0.15 0.10 IS (OFF) 0.05 120 15V DS TON 100 80 12V SS TOFF 60 0 40 –0.10 0 20 40 60 80 TEMPERATURE (°C) 100 15V DS TOFF 20 0 –40 120 –20 0 20 40 60 TEMPERATURE (°C) 80 100 120 Figure 13. TON/TOFF Times vs. Temperature Figure 10. Leakage Currents as a Function of Temperature, Single Supply 0 60 IDD PER CHANNEL TA = +25°C VDD = +15V VSS = –15V TA = +25°C –10 50 OFF ISOLATION (dB) –20 VDD = +15V, VSS = –15V 40 IDD (μA) 04778-016 04778-013 ID (OFF) –0.05 30 –30 –40 –50 –60 www.BDTIC.com/ADI 20 –70 –80 04778-011 10 0 0 2 4 6 8 10 LOGIC, INX (V) 12 –100 –110 10k 14 6 1M 10M FREQUENCY (Hz) 100M 1G 0 SOURCE TO DRAIN DRAIN TO SOURCE TA = +25°C –10 –20 VDD = +15V VSS = –15V TA = +25°C –30 0 CROSSTALK (dB) 2 VDD = +5V, VSS = –5V VDD = +12V, VSS = 0V –2 –40 –50 –60 –70 –80 –90 –6 –15 VDD = +15V, VSS = –15V –10 –5 0 VS (V) –100 5 10 04778-018 –4 04778-015 CHARGE INJECTION (pC) 100k Figure 14. Off Isolation vs. Frequency Figure 11. IDD vs. Logic Level 4 04778-017 –90 VDD = +12V, VSS = 0V –110 –120 10k 15 100k 1M FREQUENCY (Hz) 10M Figure 15. Crosstalk vs. Frequency Figure 12. Charge Injection vs. Source Voltage Rev. 0 | Page 10 of 16 100M ADG1211/ADG1212/ADG1213 0 –5 3.0 VDD = +15V VSS = –15V TA = +25°C SOURCE/DRAIN ON VDD = +15V VSS = –15V TA = +25°C CAPACITANCE (pF) ATTENUATIOIN (dB) 2.5 –10 –15 –20 2.0 1.5 DRAIN OFF 1.0 –25 100k 1M 10M 100M FREQUENCY (Hz) 1G 0.5 –10 10G –8 –6 –4 –2 04778-031 04778-019 –30 10k SOURCE OFF 0 2 VBIAS (V) 4 6 8 10 Figure 18. Capacitance vs. Source Voltage, Dual Supply Figure 16. On Response vs. Frequency 4.0 10.00 LOAD = +10kΩ TA = +25°C VDD = 12V VSS = 0V TA = 25°C 3.5 SOURCE/DRAIN ON CAPACITANCE (pF) 3.0 1.00 VDD = +15V, VSS = –15V, VS = +5Vrms 2.0 www.BDTIC.com/ADI 100 1k FREQUENCY (Hz) 10k 1.5 DRAIN OFF 1.0 SOURCE OFF 0.5 04778-029 0.10 0.01 10 2.5 04778-030 THD+N (%) VDD = +5V, VSS = –5V, VS = +3.5Vrms 0 0 100k Figure 17. THD + N vs. Frequency 2 4 6 VBIAS (V) 8 10 Figure 19. Capacitance vs. Source Voltage, Single Supply Rev. 0 | Page 11 of 16 12 ADG1211/ADG1212/ADG1213 TEST CIRCUITS IDS V1 D NC = NO CONNECT A VD Figure 22. Test Circuit 3—On Leakage VSS 0.1μF 0.1μF VDD VSS S VIN ADG1212 50% 50% VIN ADG1211 50% 50% VOUT D CL 35pF RL 300Ω IN 90% VOUT 90% GND tOFF tON Figure 23. Test Circuit 4—Switching Times www.BDTIC.com/ADI VSS VDD VS2 VSS S1 D1 S2 D2 CL 35pF RL 300Ω IN1, IN2 50% 0V RL 300Ω VOUT2 CL 35pF VOUT1 VOUT1 50% 90% 90% 0V 90% VOUT2 90% 0V ADG1213 tD GND tD Figure 24. Test Circuit 5—Break-Before-Make Time Delay RS VS VDD VSS VDD VSS S D VIN CL 1nF IN GND ADG1212 ON VOUT VIN OFF ADG1211 VOUT QINJ = CL × ΔVOUT Figure 25. Test Circuit 6—Charge Injection Rev. 0 | Page 12 of 16 ΔVOUT 04778-025 VS1 VIN 0.1μF 04778-024 VDD 0.1μF 04778-022 VD Figure 21. Test Circuit 2—Off Leakage VDD S NC A VS Figure 20. Test Circuit 1—On Resistance VS D 04778-023 RON = V1/IDS VS ID (ON) ID (OFF) S A 04778-021 IS (OFF) D 04778-020 S ADG1211/ADG1212/ADG1213 VSS VDD 0.1μF NETWORK ANALYZER VSS S VDD VS D D VIN RL 50Ω GND VOUT VIN 04778-026 VOUT VS INSERTION LOSS = 20 LOG Figure 26. Test Circuit 7—Off Isolation RL 50Ω RL 50Ω GND OFF ISOLATION = 20 LOG VOUT 50Ω IN VS NETWORK ANALYZER NETWORK ANALYZER VSS S 50Ω 50Ω IN 0.1μF VDD 0.1μF VSS VDD VSS VOUT VOUT WITH SWITCH VOUT WITHOUT SWITCH 04778-028 VDD VSS 0.1μF Figure 28. Test Circuit 9—Bandwidth VDD 0.1μF VSS 0.1μF 0.1μF AUDIO PRECISION VDD VSS RS S1 S D S2 IN R 50Ω VS V p-p D VS VIN RL 10kΩ GND VOUT GND VOUT VS 04778-027 www.BDTIC.com/ADI CHANNEL-TO-CHANNEL CROSSTALK = 20 LOG Figure 27. Test Circuit 8—Channel-to-Channel Crosstalk Figure 29. Test Circuit 10—THD + Noise Rev. 0 | Page 13 of 16 04778-032 VDD 0.1μF ADG1211/ADG1212/ADG1213 OUTLINE DIMENSIONS 5.10 5.00 4.90 16 9 4.50 4.40 4.30 6.40 BSC 1 8 PIN 1 1.20 MAX 0.15 0.05 0.20 0.09 0.30 0.19 0.65 BSC COPLANARITY 0.10 0.75 0.60 0.45 8° 0° SEATING PLANE COMPLIANT TO JEDEC STANDARDS MO-153AB Figure 30. 16-Lead Thin Shrink Small Outline Package [TSSOP] (RU-16) Dimensions shown in millimeters 3.00 BSC SQ 0.50 0.40 0.30 0.60 MAX PIN 1 INDICATOR *1.65 1.50 SQ 1.35 www.BDTIC.com/ADI 13 12 0.45 PIN 1 INDICATOR TOP VIEW 2.75 BSC SQ 0.80 MAX 0.65 TYP 12° MAX SEATING PLANE 1 EXPOSED PAD 0.50 BSC 0.90 0.85 0.80 16 9 (BOTTOM VIEW) 4 8 5 1.50 REF 0.05 MAX 0.02 NOM 0.30 0.23 0.18 0.20 REF *COMPLIANT TO JEDEC STANDARDS MO-220-VEED-2 EXCEPT FOR EXPOSED PAD DIMENSION. Figure 31. 16-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 3 mm × 3 mm Body, Very Thin Quad (CP-16-3) Dimensions shown in millimeters Rev. 0 | Page 14 of 16 0.25 MIN ADG1211/ADG1212/ADG1213 ORDERING GUIDE Model ADG1211YRUZ 1 ADG1211YRUZ-REEL1 ADG1211YRUZ-REEL71 ADG1211YCPZ-500RL71 ADG1211YCPZ-REEL71 ADG1212YRUZ1 ADG1212YRUZ-REEL1 ADG1212YRUZ-REEL71 ADG1212YCPZ-500RL71 ADG1212YCPZ-REEL71 ADG1213YRUZ1 ADG1213YRUZ-REEL1 ADG1213YRUZ-REEL71 ADG1213YCPZ-500RL71 ADG1213YCPZ-REEL71 1 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Lead Frame Chip Scale Package (LFCSP_VQ) Lead Frame Chip Scale Package (LFCSP_VQ) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Lead Frame Chip Scale Package (LFCSP_VQ) Lead Frame Chip Scale Package (LFCSP_VQ) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Lead Frame Chip Scale Package (LFCSP_VQ) Lead Frame Chip Scale Package (LFCSP_VQ) Z = Pb-free part. www.BDTIC.com/ADI Rev. 0 | Page 15 of 16 Package Option RU-16 RU-16 RU-16 CP-16-3 CP-16-3 RU-16 RU-16 RU-16 CP-16-3 CP-16-3 RU-16 RU-16 RU-16 CP-16-3 CP-16-3 ADG1211/ADG1212/ADG1213 NOTES www.BDTIC.com/ADI © 2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D04778–0–7/05(0) Rev. 0 | Page 16 of 16