Download How to control multiple voltages with the Room Controller

INS #
Application Note
Alternate Voltage Switchpack Click & Go Connection
Overview
The Room Controller is typically connected to a single feeding 20A circuit which powers the controller
and the controlled loads. In the event that your application requires mixed voltages, an alternative voltage
switchpack may be connected to the Room Controller. Any Greengate switchpack may be wired to an OCCRJ45 Input/Output Device to interface with the Room Controller, allowing loads powered by 120 VAC, 277
VAC, and 347 VAC circuits to be operated by the Room Controller. The switchpack will track its operation
with the Load 1 relay under operation. If using After-Hours Mode in lieu of motion sensors, the switchpack
output will not perform the blink warn sequence with the Load 1 relay, allowing it to be used to control
metal hallide or other lighting loads that cannot be short cycled.
Figure 1. Room Controller Click & Go Connection to an Alternate Voltage Switchpack
OCC-RJ45
(Input/Output Device)
Black
Brown
Refer to the
switchpack
installation diagram
for line voltage
connections for your
switchpack model.
Model: OCC-RJ45
Occupancy Sensor Coupler
Blue
Red
Connect the low voltage wiring from the switchpack
to the OCC-RJ45 Input/Output Device, matching wire
colors to the label. Connect a QuickConnect cable
between the switchpack Click & Go port on the Room
Controller and to one of the ports on the OCC-RJ45 ports.
QuickConnect Cable
(Class 2)
Black
Low voltage wiring
from switchpack
Click & Go
Ports
Slider
Station
Wallstations
-
A/V
Mode
+
Demand
Response
+
Alert
Mode
+
Time
Clock
+
Adjustable Skylights
QuickConnect Cables
Sensors
Sensors
6
5
4
Integration Controls
Switchpack
Receptacle
BMS/Out
2
1
Energy Options DIP Switch
Not Used
Occupancy
Occ
Vac (default)
3
4
Energy
Options
1 2
Reset
Demand Response
Default 10%
20%
30%
40%
0-10V Dimming Outputs
+ + + Dimmer 3
Dimmer 2
6
3
Status
Red
Green
0-10V Gain
Adjustment
Blue
Black
High End
r
White
Red
Low End
Red - Load 2 Out
Purple - Load 3 Out
Blue - Load In
Yellow - Load 1 Out
o
Br
Black - Line In
White/Black - 120V N
White/Orange - 277V N
Bla
Integration Controls
Mo
pa del:
nc OC
yS C
en -RJ
so 45
rC
ck
ou
n
ple
w
cu
d
Re
CAUTION: Bonding between conduit connections is not automatic and must be provided as part of the installation.
Oc
e
Blu
Adjustable Skylights
Press Here
Blue - EM Line In
Blue - EM Loads Out
Line voltage
from supply circuit
and to lighting load
Standard Greengate
switchpack
Dimmer 1
-
Dimmer 3
+
-
Dimmer 2
+
-
Dimmer 1
+
0-10V Dimming
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC140918
October 14, 2014
Eaton is a registered trademark.
All trademarks are property
of their respective owners.