Download HEAnet`s UCLP Contact

UCLPv1 HEAnet
The Official Slides
UCLP-HEAnet
•
Introduction
•
What’s UCLP?
•
HEAnet’s UCLP
•
Contact
The Official Slides
2
UCLP-HEAnet
•
Introduction
•
What’s UCLP?
•
HEAnet’s UCLP
•
Contact
The Official Slides
3
UCLP-HEAnet
Introduction
•
Main goal: To adapt UCLPv1.5 system to HEAnet's networks.
•
Create a UCLP release compatible with HEAnet’s network elements and
architecture
•
HEAnet uses MPLS in its core network. This project will adapt UCLP to
Manage Ethernet over MPLS connections.
INTERNET 2
RESEARCH
COMMUNITIES
Belfast
GENERAL
INTERNET
JANET
London
GÉANT
Citywest
Galway
Dublin
Frankfurt
Map of HEAnet’s Infrastructure
INEX
Limerick
Cork
4
UCLP-HEAnet
Introduction
•
This project attempts to allow HEAnet network users to manage its
own connections.
•
Provide software to establish and control 2 connection types:
– ERS (Ethernet Relay Service) MPLS connection in VLAN mode using
subinterfaces
– EWS (Ethernet Wire Service) MPLS connection PORT mode with Q-in-Q
encapsulation
•
The software will provide a web-based GUI to establish, manage and
query these types of connections controlled directly by the user.
5
UCLP-HEAnet
Introduction
•
Cisco E-DI (Enhanced Device Interface) will be integrated in UCLP in
order to manage network devices with an E-DI Server.
•
The objectives will be achieved through 2 deliverables:
– the first one will implement ULCPv1.5 with a new GUI over HEAnet.
– the second one will integrate UCLPv1.5 and E-DI and its implementation
over HEAnet network.
•
As a result of this work HEAnet will test this new UCLPv1
implementation, compare it with its current provisioning software and
evaluate the possibility of deploying UCLP on its network.
6
UCLP-HEAnet
Introduction
• This project will be achieved through the collaboration of
different partners: Fundació i2CAT, HEAnet, Cisco Systems,
UPC (GCO), Tecsidel (sponsor), NDP, CRC and lead by i2CAT.
7
UCLP-HEAnet
Introduction
• Partners Contribution
-
Cisco Systems
Contribution: Has donated to i2cat Fundation a set of devices that
emulates the 10Gbps HEAnet network. The devices are:
• 3 Cisco Catalyst 3750G-12S
• 12 GigabitEthernet ports
• 2 Cisco Catalyst 3750G-16TD
• 16 GigabitEthernet ports & 1 10GigabitEthernet CX4 port
• 2 Cisco 7604 Routers
• 2 10GigabitEthernet CX4 ports
• Redundant Supervisor Engine 720-3BXL
Cisco has also provided E-DI software, support and 2 servers for E-DI.
-
Tecsidel
Contribution: Has financed a part of the human resources.
8
UCLP-HEAnet
•
Introduction
•
What’s UCLP?
•
HEAnet’s UCLP
•
Contact
The Official Slides
9
What’s UCLP?
What’s UCLP?
• UCLP stands for User Controlled Lightpath Provisioning.
• As Bill St. Arnaud (senior director of Research Networks,
CANARIE) says:
'UCLP can be very simply though of as a configuration and partition
manager that exposes each lightpath in a physical network and each
network element associated with a lightpath as an 'object' or 'service' that
can be put under the control of different network users to create their own
IP network topologies'.
• This way several network operators can make part of their
resources available to end users so that they can decide when
they want to create/delete end to end connections or change the
network topology (that's why the system is called User
Controled Lighpath Provisioning).
10
What’s UCLP?
UCLP Objectives
•
UCLP was born to satisfy the requirements of certain number of applications that cannot be
implemented using centralized network management tools. Some of this applications are:
•
Customer controlled and managed networks.
Universities, regional networks and large enterprises/institutions acquire their dark fiber/lambdas
and they light them.
These organizations want to manager the new resources with the ones they own in a transparent
way and under a single management domain.
Each institution must be able to implement its own topology discover or protection mechanisms.
•
Dedicated IP networks. Aplications and disciplines with high bandwidth requeriment:
Current IP networks are optimized for thousands of clients with relatively small traffic flows
All over the world are emerging small comunities who need to interchange high amounts of traffic
at a high bit rate (grid applications, e-science, sensor and instrument networks).
•
User controlled traffic engineering:
Allow local and/or regional network managers to apply their own traffic engineering policies.
Using UCLP they can create new BGP paths between two networks creating a direct optical
connection.
Big companies and regional networks can be interconnected directly using a peering point instead
of a hierarchical IP network.
11
What’s UCLP?
Definitions
• A LightPath Object (LPO) is an abstraction of one or more
lightpaths (represents a connection between two
consecutive nodes).
• A Resource Object (RO) is an abstraction of a network
interface (Ethernet, SONET/SDH, wavelength WDM).
• An End-to-End Connection Object (E2ECO) is
abstraction of an e2e connection in the UCLP system.
•
an
User A
User B
LPO
A federation is an independent
management domain that
LightPath
has its own set of UCLP resources and services.
LPO
LPO
Slot / Port
RO A
RO B
12
What’s UCLP?
Software Architecture: Global Architecture
Grid
application
GUI
Human user
(JINI Client)
GSAP
Federation Jini
Manager Lookup
Service
Jini/RMI
GUI
(OGSA Client)
JSAP
SOAP
Jini/RMI
SOAP
Txn
Manager
LPOS
JS
Jini
Lookup
Service
SCS
TL-1/CLI/SNMP
SCS
JSAP
SCS
TL-1/CLI/SNMP
GSAP
TL-1/CLI/SNMP
Federation
1
Txn
Manager
LPOS
JS
SCS
O-UNI
GMPLS
Federation
2
cloud
13
UCLP-HEAnet
•
Introduction
•
What’s UCLP?
•
HEAnet’s UCLP
•
Contact
The Official Slides
14
HEAnet’s UCLP
Main Goal
•
Provide software to establish and control ERS and EWS virtual circuits
across HEAnet’s network
•
Create a UCLP release compatible with HEAnet’s network elements
and architecture
CPE1
PE1
CE1
Cisco 7604
Catalyst 3750 16
Catalyst 3750 12 SFP
10/100/1000BT+ 10GbE Standard Multilayer Image
Std Image
MPLS Network
Catalyst 3750 16
Catalyst 3750 12 SFP
10/100/1000BT+ 10GbE
Standard Multilayer Image
Std Image
Cisco 7604
PE2
CPE2
CE3
CE2
Catalyst 3750 12 SFP
Standard Multilayer Image
15
HEAnet’s UCLP
Services types
• The two key layer 2 Ethernet Virtual Circuit (EVC) services
that HEAnet shall provide are:
• Ethernet Wire Service (EWS) is a point-to-point port-based
transparent EVC that is used primarily to connect
geographically remote LANs over the HEAnet network.
802.1q Trunk
port
Ethernet Wire Service
802.1q Trunk
port
q-in-q
CE
PE
HEAnet
MPLS network
CPE
PE
3750
CPE
7606
q-in-q
3750
Non-trunk port
(optionally)
PE
7606
CPE
Non-trunk port
(optionally)
q-in-q
performed on
both ports
CE
CE
7606
LSPs,
“pseudowires”
3750
16
HEAnet’s UCLP
Services types
• Ethernet Relay Service (ERS) is a point-to-point VLANbased EVC. It is presented to the user as an 802.1q trunk
which filters customer Layer 2 control protocols and uses
the different customer VLAN IDs to direct customer traffic
to different destinations. ERS is a non-transparent service,
which means that the customer Layer 2 control protocols
are dropped.
802.1q Trunk
port
Ethernet Relay Service
802.1q Trunk
port
CE
PE
HEAnet
MPLS network
CPE
PE
3750
CPE
7606
Non-trunk port
(optionally)
Trunking
3750
PE
7606
CPE
802.1q Trunk
port
CE
CE
7606
Trunking
LSPs,
“pseudowires”
3750
17
HEAnet’s UCLP
Resource partitioning
•
In order to offer ERS/EWS services, network resources have to be
partitioned accordingly to the needs of each connection, since several
connections can use the same port or link.
•
This implies that “parent” ResourceObjects and LightPathObjects
have to be partitioned in several sub-resources, one for each
connection that uses them.
•
Manually-generated ROs and LPOs are called “parents”, and do not
participate in any connection, only have information about the physical
resource and the remaining capacity in that resource.
•
Each time a connection is requested, parent resources partition
themselves to generate sub-resources with enough capacity for the
connection. After that the parent resources updates its current
available bandwidth.
18
HEAnet’s UCLP
Resource partitioning
Parent ROs 900Mbps
Connection request 100Mbps
ParentLPO 900Mbps
+
ParentLPO 1000Mbps
ChildLPO 100Mbps
Children ROs 100Mbps
Parent ROs 1000Mbps
Connection!
19
HEAnet’s UCLP
Supported devices
• UCLP’s adaptation for HEAnet supports the following devices:
– Cisco 7600 routers (created from scratch)
– Cisco Catalyst 3750 switches (modification of an existent package,
keeping full compatibility)
• Moreover, a new pseudo device has been implemented to
support connections across MPLS networks (MPLSCloud). This
pseudo device contains instances of the edge devices of the
cloud
• In addition to the MPLSCloud, a new type of resource object
has been defined (MPLSRO). This kind of resource object
represents edge interfaces of an MPLSCloud
• New devices can be added simply by adding a Java package to
the SCS layer
20
HEAnet’s UCLP
E-DI
•
E-DI stands for Enhanced Device Interface
•
Cisco E-DI provides a comprehensive management interface for Cisco
devices and offers interfaces for two categories of users:
– the human user interacting with network
devices through CLI
– management application programs interacting
with network devices through an XML
programmatic interface.
•
Cisco E-DI provides a CLI user interface (CLI-UI) and
an XML programmatic interface (XML PI). Cisco E-DI
can be deployed in conjunction with a management
application, or in a stand-alone configuration.
•
E-DI has been integrated in ULCP in order to give
the possibility to manage equipment with the E-DI
XML PI.
21
HEAnet’s UCLP
•
Improvements & new functionalities
New packages
– Cisco Catalyst 3750G-12S switch (modification of an existent package,
keeping full compatibility)
– Cisco Catalyst 3750G-16TD switch
– Cisco 7600 router
– MPLSCloud
– E-DI
– SSH
– MPLSRO
•
Adapted packages
–
–
–
–
–
–
JSAP
LPOS
SCS
Configtool
Jiniclient
etc…
22
HEAnet’s UCLP
•
New functionalities
–
–
–
–
–
–
•
Improvements & new functionalities
Vlan Manager
Resource Partitioning
Support for EWS & ERS connections
New UCLP installer
New GUI
Improvement in launch uclp services scripts (“all-scs”)
Others
– Bug fixes
– Code Enhancements
23
HEAnet’s UCLP
Screenshots
•New GUI
24
HEAnet’s UCLP
Screenshots
• New Resource Object (MPLS RO)
•
New UCLP Installer
Create RO, MPLSRO
25
HEAnet’s UCLP
•
Screenshots
New UCLP Service (Vlan Manager)
Vlan Manager
Used vlans
Free vlans
Get new vlan
Suggest vlan
Set vlan
Release vlan
Check vlan
Query used Vlans, Vlan Manager
26
HEAnet’s UCLP
•
Screenshots
UCLP Configtool Improvements
EDI Server Configuration
SCS Configuration, Cisco Catalyst 3750G-12S, EDI
27
HEAnet’s UCLP
•
Screenshots
Create connection dialog
GUI, Create an ERS connection with vlan 54
28
Test-bed implementation at i2CAT
UCLP CLIENTS
UCLP SERVER
Internet
E-DI SERVER
VIRGO.I2CAT.NET
TAURUS.I2CAT.NET
ARIES.I2CAT.NET
LIBRA.I2CAT.NET
IP: 192.168.114.2
IP: 192.168.114.3
IP: 192.168.114.4
IP: 192.168.114.12
PEGASUS
CAPRICORNUS.I2CAT.NET
IP: 192.168.114.5
PISCES.I2CAT.NET
Cisco Catalyst 3750G-12S
IP: 192.168.114.8
SCORPIUS.I2CAT.NET
Cisco Catalyst 3750G-12S
+
Cisco Catalyst 3750G-16TD
IP: 192.168.114.9
Cisco Catalyst 3750G-12S
+
Cisco Catalyst 3750G-16TD
GigabitEthernet
EoMPLS NETWORK
Cisco 7604
Cisco 7604
AQUARIUS.I2CAT.NET
LEO.I2CAT.NET
IP: 192.168.114.10
IP: 192.168.114.11
10GigabitEthernet
Management
connection
(Fast Ethernet)
UCLP-HEAnet
•
Introduction
•
What’s UCLP?
•
HEAnet’s UCLP
•
Contact
The Official Slides
30
UCLP-HEAnet
Contact
• For more information please visit:
www.i2cat.net
www.uclp.ca
• Contact: Sergi Figuerola ([email protected] )
Michel Savoie ([email protected] )
• Technical support at: [email protected] or [email protected]
• Phone:
+34 93 553 25 15 (Sergi)
+34 93 401 74 32 (Angel)
+34 93 401 71 79 (David)
31