Download PPT

15-441 Computer Networking
Lecture 7 – IP Addressing and
Forwarding
Outline
• Methods for packet forwarding
• Traditional IP addressing
• CIDR IP addressing
• Forwarding example
Lecture 7: 9-18-01
2
Techniques for Forwarding
Packets
• Source routing
• Packet carries path
• Table of virtual circuits
• Connection routed through network to setup
state
• Packets forwarded using connection state
• Table of global addresses (IP)
• Routers keep next hop for destination
• Packets carry destination address
Lecture 7: 9-18-01
3
Source Routing
• List entire path in packet
• Driving directions (north 3 hops, east, etc..)
• Router processing
• Examine first step in directions
• Strip first step from packet
• Forward to step just stripped off
Lecture 7: 9-18-01
4
Source Routing Example
Packet
3,4,3
4,3
2
Sender
1
R1
2
3
R2
1
4
3
4
3
2
1
R3
4
Lecture 7: 9-18-01
3
Receiver
5
Source Routing
• Advantages
• Switches can be very simple and fast
• Disadvantages
• Variable (unbounded) header size
• Sources must know or discover topology (e.g.,
failures)
• Typical use
• Ad-hoc networks (DSR)
• Machine room networks (Myrinet)
Lecture 7: 9-18-01
6
Global Addresses (IP)
• Each packet has destination address
• Each switch has forwarding table of
destination  next hop
• At v and x: destination  east
• At w and y: destination  south
• At z: destination  north
• Distributed routing algorithm for calculating
forwarding tables
Lecture 7: 9-18-01
7
Global Address Example
Packet
R
R
2
Sender
1
R1
2
3
R2
1
4
R4
3
4
R3
R
2
1
R3
4
3
Receiver
R
R3
Lecture 7: 9-18-01
8
Router Table Size
• One entry for every host on the Internet
• 100M entries,doubling every year
• One entry for every LAN
• Every host on LAN shares prefix
• Still too many, doubling every year
• One entry for every organization
• Every host in organization shares prefix
• Requires careful address allocation
Lecture 7: 9-18-01
9
Global Addresses
• Advantages
• Stateless – simple error recovery
• Disadvantages
• Every switch knows about every destination
• Potentially large tables
• All packets to destination take same route
Lecture 7: 9-18-01
10
How do we set up Routing Tables?
• Graph theory to compute “shortest path”
• Switches = nodes
• Links = edges
• Delay, hops = cost
• Need to adapt to changes in topology
Lecture 7: 9-18-01
11
Virtual Circuits/Tag Switching
• Connection setup phase
• Use other means to route setup request
• Each router allocates flow ID on local link
• Creates mapping of inbound flow ID/port to outbound
flow ID/port
• Each packet carries connection ID
• Sent from source with 1st hop connection ID
• Router processing
• Lookup flow ID – simple table lookup
• Replace flow ID with outgoing flow ID
• Forward to output port
Lecture 7: 9-18-01
12
Virtual Circuits Examples
Packet
5
7
2
Sender
1
R1
2
3
R2
1
4
1,7  4,2
3
4
1,5  3,7
2
2
1
R3
4
3
Receiver
6
2,2  3,6
Lecture 7: 9-18-01
13
Virtual Circuits
• Advantages
•
•
•
•
More efficient lookup (simple table lookup)
More flexible (different path for each flow)
Can reserve bandwidth at connection setup
Easier for hardware implementations
• Disadvantages
• Still need to route connection setup request
• More complex failure recovery – must recreate
connection state
• Typical uses
• ATM – combined with fix sized cells
• MPLS – tag switching for IP networks
Lecture 7: 9-18-01
14
IP Datagrams on Virtual Circuits
• Challenge – when to setup connections
• At bootup time – permanent virtual circuits
(PVC)
• Large number of circuits
• For every packet transmission
• Connection setup is expensive
• For every connection
• What is a connection?
• How to route connectionless traffic?
Lecture 7: 9-18-01
15
IP Datagrams on Virtual Circuits
• Traffic pattern
• Few long lived flows
• Flow – set of data packets from source to
destination
• Large percentage of packet traffic
• Improving forwarding performance by using
virtual circuits for these flows
• Other traffic uses normal IP forwarding
Lecture 7: 9-18-01
16
Comparison
Source Routing
Global Addresses
Virtual Circuits
Header Size
Worst
OK – Large address
Best
Router Table Size
None
Number of hosts
(prefixes)
Number of circuits
Forward Overhead
Best
Prefix matching
Pretty Good
Setup Overhead
None
None
Connection Setup
Tell all routers
Tell all routers and
Tear down circuit
and re-route
Error Recovery
Tell all hosts
Lecture 7: 9-18-01
17
Forwarding vs. Routing
• Forwarding: the process of moving packets from
input to output
• The forwarding table
• Information in the packet
• Routing: process by which the forwarding table is
built and maintained
• One or more routing protocols
• Procedures (algorithms) to convert routing info to
forwarding table.
Lecture 7: 9-18-01
18
Outline
• Methods for packet forwarding
• Traditional IP addressing
• CIDR IP addressing
• Forwarding example
Lecture 7: 9-18-01
19
How is IP Design Standardized?
• IETF
• Voluntary organization
• Meeting every 4 months
• Working groups and email discussions
• “We reject kings, presidents, and voting; we
believe in rough consensus and running code”
(Dave Clark 1992)
• Need 2 independent, interoperable implementations for
standard
• IRTF
• End2End
• Reliable Multicast, etc..
Lecture 7: 9-18-01
20
Addressing in IP
• IP addresses are names of interfaces
• Domain Name System (DNS) names are
names of hosts
• DNS binds host names to interfaces
• Routing binds interface names to paths
Lecture 7: 9-18-01
21
Addressing Considerations
• Fixed length or variable length?
• Issues:
• Flexibility
• Processing costs
• Header size
• Engineering choice: IP uses fixed length
addresses
Lecture 7: 9-18-01
22
Addressing Considerations
• Structured vs flat
• Issues
• What information would routers need to route to
Ethernet addresses?
• Need structure for designing scalable binding from
interface name to route!
• How many levels? Fixed? Variable?
Lecture 7: 9-18-01
23
IP Addresses
• Fixed length: 32 bits
• Initial classful structure (1981)
• Total IP address size: 4 billion
• Class A: 128 networks, 16M hosts
• Class B: 16K networks, 64K hosts
• Class C: 2M networks, 256 hosts
High Order Bits
0
10
110
Format
7 bits of net, 24 bits of host
14 bits of net, 16 bits of host
21 bits of net, 8 bits of host
Lecture 7: 9-18-01
Class
A
B
C
24
IP Address Classes
(Some are Obsolete)
Network ID
Host ID
8
16
Class A 0 Network ID
24
32
Host ID
Class B 10
Class C 110
Class D 1110
Multicast Addresses
Class E 1111
Reserved for experiments
Lecture 7: 9-18-01
25
Some Special IP Addresses
• 127.0.0.1: local host (a.k.a. the loopback
address
• Host bits all set to 0: network address
• Host bits all set to 1: broadcast address
Lecture 7: 9-18-01
26
Interaction with Link Layer
• How does one find the Ethernet address of
a IP host?
• ARP
• Broadcast search for IP address
• E.g., “who-has 128.2.184.45 tell 128.2.206.138” sent
to Ethernet broadcast (all FF address)
• Destination responds (only to requester using
unicast) with appropriate 48-bit Ethernet
address
• E.g, “reply 128.2.184.45 is-at 0:d0:bc:f2:18:58” sent
to 0:c0:4f:d:ed:c6
Lecture 7: 9-18-01
27
Original IP Route Lookup
• Address classes
• A: 0 | 7 bit network | 24 bit host (16M each)
• B: 10 | 14 bit network | 16 bit host (64K)
• C: 110 | 21 bit network | 8 bit host (255)
• Address would specify prefix for forwarding
table
• Simple lookup
Lecture 7: 9-18-01
28
Original IP Route Lookup –
Example
• www.cmu.edu address 128.2.11.43
• Class B address – class + network is 128.2
• Lookup 128.2 in forwarding table
• Prefix – part of address that really matters for routing
• Forwarding table contains
• List of class+network entries
• A few fixed prefix lengths (8/16/24)
• Large tables
• 2 Million class C networks
Lecture 7: 9-18-01
29
Subnet Addressing
RFC917 (1984)
• For class B & C networks
• Very few LANs have close to 64K hosts
• For electrical/LAN limitations, performance or
administrative reasons
• Need simple way to get multiple “networks”
• Use bridging, multiple IP networks or split up single
network address ranges (subnet)
• Must reduce the total number of network addresses
that are assigned
• CMU case study in RFC
• Chose not to adopt – concern that it would not be
widely supported 
Lecture 7: 9-18-01
30
Subnetting
• Variable length subnet masks
• Could subnet a class B into several chunks
Network
Host
Network
Subnet
1111..
..1111
Lecture 7: 9-18-01
Host
00000000
Mask
31
Subnetting Example
• Assume an organization was assigned
address 150.100
• Assume < 100 hosts per subnet
• How many host bits do we need?
• Seven
• What is the network mask?
• 11111111 11111111 11111111 10000000
• 255.255.255.128
Lecture 7: 9-18-01
32
Forwarding Example
• Assume a packet arrives with address
150.100.12.176
• Step 1: AND address with class +subnet mask
150.100.12.154
150.100.12.176
H1
H2
150.100.12.128
150.100.0.1
To Internet
150.100.12.129
R1
150.100.12.24
150.100.12.55
H3
H4
150.100.12.4
150.100.12.0
Lecture 7: 9-18-01
33
Outline
• Methods for packet forwarding
• Traditional IP addressing
• CIDR IP addressing
• Forwarding example
Lecture 7: 9-18-01
34
IP Address Problem (1991)
• Address space depletion
• In danger of running out of classes A and B
• Why?
• Class C too small for most domains
• Very few class A – very careful about giving
them out
• Class B – greatest problem
Lecture 7: 9-18-01
35
IP Address Utilization (‘98)
http://www.caida.org/outreach/resources/learn/ipv4space/
Lecture 7: 9-18-01
36
IP Addressing Problems
• Class B sparsely populated
• But people refuse to give it back
• Large forwarding tables
• 2 Million possible class C groups
• Solution
• Assign multiple class C addresses
• Assign consecutive blocks
• RFC1338 – Classless Inter-Domain Routing
(CIDR)
Lecture 7: 9-18-01
37
Classless Inter-Domain Routing
• Do not use classes to determine network ID
• Assign any range of addresses to network
• Use common part of address as network number
• E.g., addresses 192.4.16 - 192.4.31 have the first 20
bits in common. Thus, we use these 20 bits as the
network number
• netmask is /20, /xx is valid for almost any xx
• Enables more efficient usage of address space
(and router tables)
Lecture 7: 9-18-01
38
CIDR
• Supernets
• Assign adjacent net addresses to same org
• Classless routing (CIDR)
• How does this help routing table?
• Combine forwarding table entries whenever all
nodes with same prefix share same hop
Lecture 7: 9-18-01
39
IP Addresses: How to Get One?
Network (network portion):
• Get allocated portion of ISP’s address space:
ISP's block
11001000 00010111 00010000 00000000
200.23.16.0/20
Organization 0
11001000 00010111 00010000 00000000
200.23.16.0/23
Organization 1
11001000 00010111 00010010 00000000
200.23.18.0/23
Organization 2
...
11001000 00010111 00010100 00000000
…..
….
200.23.20.0/23
….
Organization 7
11001000 00010111 00011110 00000000
200.23.30.0/23
Lecture 7: 9-18-01
40
IP addresses: How to Get One?
Q: How does an ISP get block of addresses?
A: ICANN: Internet Corporation for Assigned
Names and Numbers
• Allocates addresses
• Manages DNS
• Assigns domain names, resolves disputes
Lecture 7: 9-18-01
41
IP addresses: How to Get One?
Hosts (host portion):
• Hard-coded by system admin in a file
• DHCP: Dynamic Host Configuration Protocol:
dynamically get address: “plug-and-play”
• Host broadcasts “DHCP discover” msg
• DHCP server responds with “DHCP offer” msg
• Host requests IP address: “DHCP request” msg
• DHCP server sends address: “DHCP ack” msg
Lecture 7: 9-18-01
42
Hierarchical Addressing: Route
Aggregation
• Hierarchical addressing allows efficient
advertisement of routing information:
Organization 0
200.23.16.0/23
Organization 1
200.23.18.0/23
Organization 2
200.23.20.0/23
Organization 7
.
.
.
.
.
.
Fly-By-Night-ISP
“Send me anything
with addresses
beginning
200.23.16.0/20”
Internet
200.23.30.0/23
ISPs-R-Us
Lecture 7: 9-18-01
“Send me anything
with addresses
beginning
199.31.0.0/16”
43
Hierarchical Addressing: More
Specific Routes
• ISPs-R-Us has a more specific route to
Organization 1
Organization 0
200.23.16.0/23
Organization 2
200.23.20.0/23
Organization 7
.
.
.
.
.
.
Fly-By-Night-ISP
“Send me anything
with addresses
beginning
200.23.16.0/20”
Internet
200.23.30.0/23
ISPs-R-Us
Organization 1
200.23.18.0/23
Lecture 7: 9-18-01
“Send me anything
with addresses
beginning 199.31.0.0/16
or 200.23.18.0/23”
44
CIDR Example
• Network provide is allocated 8 class C
chunks, 201.10.0.0 to 201.10.7.255
• Allocation uses 3 bits of class C space
• Remaining 21 bits are network number, written
as 201.10.0.0/21
• Replaces 8 class C routing entries with 1
combined entry
• Routing protocols carry prefix with destination
network address
• Longest prefix match for forwarding
Lecture 7: 9-18-01
45
CIDR Illustration
Provider is given 201.10.0.0/21
Provider
201.10.0.0/22
201.10.4.0/24
201.10.5.0/24
Lecture 7: 9-18-01
201.10.6.0/23
46
CIDR Addressing Shortcomings
• Multi-homing
• Customer selecting a new provider
201.10.0.0/21
Provider 1
201.10.0.0/22 201.10.4.0/24
201.10.5.0/24
Provider 2
201.10.6.0/23 or Provider 2 address
Lecture 7: 9-18-01
47
Outline
• Methods for packet forwarding
• Traditional IP addressing
• CIDR IP addressing
• Forwarding example
Lecture 7: 9-18-01
48
Routing to the Network
• Packet to
10.1.1.3 arrives
• Path is R2 – R1 –
H1 – H2
10.1.1.2
10.1.1.4
10.1.1.3
H1
H2
10.1.1/24
10.1.0.2
10.1.0.1
10.1.1.1
10.1.2.2
R1
H3
10.1.0/24
10.1.2/23
10.1/16
Provider
R2
10.1.8.1
10.1.2.1
10.1.16.1
10.1.8/24
H4
10.1.8.4
Lecture 7: 9-18-01
49
Routing Within the Subnet
• Packet to 10.1.1.3
• Matches 10.1.0.0/23
10.1.1.2
10.1.1.4
10.1.1.3
H1
H2
10.1.1/24
10.1.0.2
Routing table at R2
Destination
Next Hop
Interface
127.0.0.1
127.0.0.1
lo0
Default or 0/0
provider
10.1.16.1
10.1.8.0/24
10.1.8.1
10.1.8.1
10.1.2.0/23
10.1.2.1
10.1.2.1
10.1.0.0/23
10.1.2.2
10.1.2.1
Lecture 7: 9-18-01
10.1.0.1
10.1.1.1
10.1.2.2
R1
H3
10.1.0/24
10.1.2/23
10.1/16
R2
10.1.8.1
10.1.2.1
10.1.16.1
10.1.8/24
H4
10.1.8.4
50
Routing Within the Subnet
• Packet to 10.1.1.3
• Matches 10.1.1.1/31
• Longest prefix match
Routing table at R1
Destination
Next Hop
Interface
127.0.0.1
127.0.0.1
lo0
Default or 0/0
10.1.2.1
10.1.2.2
10.1.0.0/24
10.1.0.1
10.1.0.1
10.1.1.0/24
10.1.1.1
10.1.1.4
10.1.2.0/23
10.1.2.2
10.1.2.2
10.1.1.2/31
10.1.1.2
10.1.1.2
Lecture 7: 9-18-01
10.1.1.2
10.1.1.4
10.1.1.3
H1
H2
10.1.1/24
10.1.0.2
10.1.0.1
10.1.1.1
10.1.2.2
R1
H3
10.1.0/24
10.1.2/23
10.1/16
R2
10.1.8.1
10.1.2.1
10.1.16.1
10.1.8/24
H4
10.1.8.4
51
Routing Within the Subnet
• Packet to 10.1.1.3
• Direct route
10.1.1.2
10.1.1.4
10.1.1.3
H1
H2
10.1.1/24
• Longest prefix match
Routing table at H1
10.1.0.2
10.1.0.1
10.1.1.1
10.1.2.2
R1
H3
10.1.0/24
Destination
Next Hop
Interface
127.0.0.1
127.0.0.1
lo0
Default or 0/0
10.1.1.1
10.1.1.2
10.1.1.0/24
10.1.1.2
10.1.1.1
10.1.1.3/31
10.1.1.2
10.1.1.2
Lecture 7: 9-18-01
10.1.2/23
10.1/16
R2
10.1.8.1
10.1.2.1
10.1.16.1
10.1.8/24
H4
10.1.8.4
52