Download Bez tytułu slajdu

TA1-T10 New Optimisation Polish Telecom Network
ACTS Project BBL AC038
(BroadBandLoop)
ACTS Project BTI AC362
(Broadband Trial Integration)
IST Project LION IST-1999-11387
(Layers Interworking in Optical Networks)
presented by
Janusz Maliszewski
Telekomunikacja Polska S.A.
Tel. (+48 22) 6571 377
Fax (+48 22) 6960 520
e-mail: [email protected]
Project TA1-T10
Project Data – Project ending date: 1995
TA1-T10 main goal
• The goal was to define new optimised developing plans
for Polish telecommunications network.
Project BBL
BBL Project Data – Project ending date: June 1999
BBL main goal
• Define and test in three field trials a concept for a cost
effective broadband access network which will allow fibre
to migrate gracefully into the local loop as bandwidth
demand increases.
• The concept was build on the existing coax and copper
twisted pair infrastructure for the last drop when
economical feasible.
Project BBL
BBL main goal
• The project was devote a major effort to define and build
an optical access network with the following
characteristics: cost effective, compact, low power
consumption, modular extendible bandwidth up to 1 Gbit/s
(155Mbit/s+16x52Mbit/s) downstream and 576Mbit/s
(16x10Mbit/s + 8x52Mbit/s), flexibility in bandwidth
allocation, high transmission quality and robustness
towards outside plant performance. The network was
provide transparency for both existing narrowband
services and future ATM based broadband services.
Project BBL
BBL main goal
• Field trial with real users and a range of broadband
services were use to evaluate the network concept.
System performance were measure over an operational
period of one year.
• The Life Cycle Cost (LCC) estimations were guide the
technical work in the project and were applied to evaluate
competitiveness between different drop solutions (copper
twisted pair, coax, fibre, radio). LCC studies were
supported by traffic studies leading to estimation of
bandwidth demand and influence on the bandwidth
demand by optimal location of ATM switching in the
network.
Project BTI
BTI Project Data – Project ending date: December 1999
BTI main goal
• In order to meet requirements for improved quality of
Internet Services the project has developed and
demonstrated a concept for improved Quality of Services
(QoS) based on integration of IP and ATM. The focus of
the work has been on an ATM based Passive Optical
Network (APON).
Project BTI
BTI main goal
• The network concept is supporting unicast and multicast
with well-defined QoS control in terms of controlled load and guaranteed service. The QoS controlled network is
based on IPv6, RSVP, PIM, NHRP and ATM with point to
point and point to multipoint SVCs. Each of these
technologies have a role in increasing network
performance, lower cost and providing a well defined
network service quality for the end user.
Project BTI
BTI main goal
• The technical performance of the network has been
measured in order to evaluate the viability of the concept.
• A program of structured usability testing has been
performed to evaluate the user perception of the QoS
control and the user interface. For this purpose user
applications for distance learning were enhanced with
QoS network control via RSVP and ATM signalling.
• Students and teachers at universities and schools in
Denmark, Poland, and Portugal have been connected to a
trial network.
IST Project LION
• LION main goal
„The goal is to design and test a resilient and managed
transport network realised by an Optical Transport
Network (OTN) carrying different clients (e.g. SDH, ATM,
IP-based) with interworking and interconnection between
layer networks and domains. ”
LION Project Data
– Project starting date:
– Project duration:
– Project total costs:
– EC contribution:
January 2000
36 months
10,690,000 Euro
5,500,000 Euro
LION Consortium
•
•
•
•
•
•
•
•
•
•
•
•
Telecom Italia LAB (CSELT) - Prime Contractor - (I)
Cisco Systems International B.V. - (NL)
T-Nova - DTAG (D)
Interuniversity Microelectronics Center (IMEC) - (B)
Siemens München (SICN) - (D)
Nippon Telegraph Telephone Co. (NTT) - (JP)
National Technical University of Athens (NTUA) - (EL)
Optical Technology Center (OTC- Agilent) - (I)
Sirti - (I)
The University of Mining and Metallurgy (AGH) - (PL)
Telekomunikacja Polska (TP SA) - (PL)
Universitat Politecnica de Catalunya (UPC) - (E)
LION Objectives
• Definition of the network and business models for a clientindependent OTN evolving to data-centric automatic
solutions (e.g. ASON, G-MPLS)
• Identification of strategies for integrated resilience in a multilayers network (IP over WDM\OTN)
• Design and implementation of UNI and NNI interfaces based
on the Digital Wrapper technology
• Design and implementation of two interworking Network
Managers in CORBA and WBEM technologies
• Cost evaluation of IP over DWDM\OTN case studies
• Experiments in a Optical Internetworking test-bed
LION Project Structure
• WP0 - Project Management (CSELT)
• WPG1 - Network Studies (IMEC)
– WP1 - Network Scenarios and Requirements (AGH)
– WP2 - Resilience (IMEC)
– WP3 - Planning and Evaluation (Sirti)
• WPG2 - Interface and Management (T-Nova)
– WP4 - Interfaces and OAM (NTUA)
– WP5 - Management (T-Nova)
• WPG3 - Test Bed (CSELT)
– WP6 - Implementation and Integration (CSELT)
– WP7 - Definition and Assessments ( CSELT)
Involvement of TPSA in LION Project
• WPG1 – Network Studies
– WP1 – Network Scenarios and Requirements, WP Partner
– WP2 – Resilience, WP Partner
– WP3 – Planning and Evaluation, WP Partner
LION WPG1
WP1 Network Scenarios and Requirements
Network Requirements:
•
•
•
•
•
•
•
•
Client independent transport network
Scalability
Policy management
Efficient and cost-effective resilience
Automatic end-to-end provisioning
Fast and efficient routing
Policy-based traffic engineering for QoS
Support of Optical Virtual Private Networks
LION WPG1
WP1 Network Scenarios and Requirements
ATM, IP, voice
SDH
IP (MPLS)
GbE, DPT
SDH*
DW
OTN (WDM)
DW = Digital Wrapper
SDH* = SDH framing
POS
SDH*
DW
LION WPG1
WP1 Network Scenarios and Requirements
LION Roadmap
LION WPG1
WP2 Resilience
•To study coordinated resilience strategies in
multilayer and multidomain networks
•Provide inputs to WPG2 on impact of integrated
resilience on network management and OA&M
•Provide inputs to WPG3 on definition and
implementation of resilience strategies in the LION
testbed
LION WPG1
WP3 Planning and Evaluation
• Mapping of the overall network requirements into the
individual layers, considering the selected recovery
mechanisms, the layer architectures and the capacity
requirements
• Definition of coherent and integrated methodologies in
order to use the planning tools, as available by each
partners
• Definition of guidelines to be followed by the operators in
planning multi-layer network minimizing costs but still
guaranteeing a defined degree of survivability.
LION WPG1 – Summary
WP1: Network scenarios and requirements
WP2:Resilience
ATM, IP, voice
IP (MPLS)
Single layer
Survivability capabilities
of each technology
SDH
Multi layer
Failure scenarios
GbE, DPT
SDH*
DW
POS
SDH*
DW
OTN (WDM)
Interworking strategies:
• hold-off timer
• recovery token
Network Functionality for
Layers Inter-Working
LION Roadmap
TCP/IP/(MPLS)
DPT SRP-fa IPS
WP3: Planning and evaluation
ATM, IP, voice
WPG2 -WP4: Architectures and
interfaces
SIREN-Plan
CCN Optimiser
D11: Functional requirements for interfaces
WDMNetDesign
WDMRing
Case studies definition
SDH
IP (MPLS)
GbE, DPT
SDH*
DW
OTN (WDM)
POS
SDH*
DW
IP Net
Planner
LION WPG2
WP4 Interfaces and OAM
• Definition of the interfaces requirements of an advanced optical
transport network (for example an ASON) that is server to carry
different client transport networks with interworking
functionality between layers.
• Functionality description and specification of the UNI and NNI
interfaces for the LION testbed.
LION WPG2
WP4 Interfaces and OAM
Control Plane: Peer Model
LION WPG2
WP4 Interfaces and OAM
Control
Plane
IP
IP
„routing peers“
LSP
Control
Plane
LSP
physical
physical
p. to p. connection served by OTN
Control
Plane
OCh
„routing
peers“
Control
Plane
OCh
„routing
peers“
Control
Plane
OCh
Interworking
Primitives
• Connect
• Disconnect
• Switch
• Bridge
• Alarm
•...
 transport network provides point to point connection to the client domain
 routing protocols, topology distribution, and signalling protocols
controlplanes are completely independent
 static overlay model (manual configuration or configuration by management )
 signalled overlay model (ODSI, g.ason, OIF UNI1.0)
 simple integration of non-IP clients
Control Plane: Overlay Model
LION WPG2
WP5 Management
• To study the inter-working of management systems in a
heterogeneous management environment.
• To define the management functions related to ASONS and to
support them with an appropriate Network Level information
model.
• To develop an efficient architecture for the umbrella
management system for heterogeneous environments enabling
an end-to-end view on network level resources in the server
network and in the client network.
• To implement the umbrella management system and the
network element agents
LION WPG2
WP5 Management
LION WPG3
WP6 Implementation and Integration
Testbed configuration: OXC2 and OXC3 are ASON prototypes from Siemens
LION WPG3
WP7 Definition and Assessment
•To identify testbed configurations and experiments
•To perform testbed subsystems tests (e.g. interoperability
tests among application sources, IP-routers, SDH and OTN
equipment) including management systems
•To validate interworking functionality (optical channel set-up
driven by IP GSR UNI signalling