Download Document

Thermochemistry
Chapter 6
Energy is the capacity to do work
•
Radiant energy comes from the sun and is
earth’s primary energy source
•
Thermal energy is the energy associated with
the random motion of atoms and molecules
•
Chemical energy is the energy stored within the
bonds of chemical substances
•
Nuclear energy is the energy stored within the
collection of neutrons and protons in the atom
•
Potential energy is the energy available by virtue
of an object’s position
6.1
Energy Changes in Chemical Reactions
Heat is the transfer of thermal energy between two bodies that
are at different temperatures.
Temperature is a measure of the thermal energy.
Temperature = Thermal Energy
900C
400C
greater thermal energy
6.2
Thermochemistry is the study of heat change in chemical
reactions.
The system is the specific part of the universe that is of
interest in the study.
open
Exchange: mass & energy
closed
isolated
energy
nothing
6.2
Exothermic process is any process that gives off heat –
transfers thermal energy from the system to the surroundings.
2H2 (g) + O2 (g)
H2O (g)
2H2O (l) + energy
H2O (l) + energy
Endothermic process is any process in which heat has to be
supplied to the system from the surroundings.
energy + 2HgO (s)
energy + H2O (s)
2Hg (l) + O2 (g)
H2O (l)
6.2
Thermodynamics is the scientific study of the
interconversion of heat and other kinds of energy.
State functions are properties that are determined by the state
of the system, regardless of how that condition was achieved.
energy, pressure, volume, temperature
DE = Efinal - Einitial
DP = Pfinal - Pinitial
DV = Vfinal - Vinitial
DT = Tfinal - Tinitial
Potential energy of hiker 1 and hiker 2
is the same even though they took
different paths.
6.3
First law of thermodynamics – energy
can be converted from one form to another,
but cannot be created or destroyed.
DEsystem + DEsurroundings = 0
or
DEsystem = -DEsurroundings
C3H8 + 5O2
3CO2 + 4H2O
Exothermic chemical reaction!
Chemical energy lost by combustion = Energy gained by the surroundings
system
surroundings
6.3
Enthalpy (H) is used to quantify the heat flow into or out of a
system in a process that occurs at constant pressure.
DH = H (products) – H (reactants)
DH = heat given off or absorbed during a reaction at constant pressure
Hproducts < Hreactants
DH < 0
Hproducts > Hreactants
DH > 0
6.4
Thermochemical Equations
Is DH negative or positive?
System absorbs heat
Endothermic
DH > 0
6.01 kJ are absorbed for every 1 mole of ice that
melts at 00C and 1 atm.
H2O (s)
H2O (l)
DH = 6.01 kJ
6.4
Thermochemical Equations
Is DH negative or positive?
System gives off heat
Exothermic
DH < 0
890.4 kJ are released for every 1 mole of methane
that is combusted at 250C and 1 atm.
CH4 (g) + 2O2 (g)
CO2 (g) + 2H2O (l) DH = -890.4 kJ
6.4
Thermochemical Equations
•
The stoichiometric coefficients always refer to the number
of moles of a substance
H2O (s)
•
DH = 6.01 kJ
If you reverse a reaction, the sign of DH changes
H2O (l)
•
H2O (l)
H2O (s)
DH = -6.01 kJ
If you multiply both sides of the equation by a factor n,
then DH must change by the same factor n.
2H2O (s)
2H2O (l)
DH = 2 x 6.01 = 12.0 kJ
6.4
Thermochemical Equations
•
The physical states of all reactants and products must be
specified in thermochemical equations.
H2O (s)
H2O (l)
DH = 6.01 kJ
H2O (l)
H2O (g)
DH = 44.0 kJ
How much heat is evolved when 266 g of white
phosphorus (P4) burn in air?
P4 (s) + 5O2 (g)
266 g P4 x
P4O10 (s)
1 mol P4
123.9 g P4
x
DH = -3013 kJ
3013 kJ
= 6470 kJ
1 mol P4
6.4
The specific heat (cp) of a substance is the amount of heat (q)
required to raise the temperature of one gram of the
substance by one degree Celsius.
The heat capacity (C) of a substance is the amount of heat
(q) required to raise the temperature of a given quantity (m)
of the substance by one degree Celsius.
C = m x cp
Heat (q) absorbed or released:
q = m x cp x DT
q = C x DT
DT = Tfinal - Tinitial
6.5
How much heat is given off when an 869 g iron bar cools
from 940C to 50C?
s of Fe = 0.444 J/g • 0C
Dt = tfinal – tinitial = 50C – 940C = -890C
q = msDt = 869 g x 0.444 J/g • 0C x –890C = -34,000 J
6.5
Constant-Pressure Calorimetry
qsys = qwater + qcal + qrxn
qsys = 0
qrxn = - (qwater + qcal)
qwater = m x s x Dt
qcal = Ccal x Dt
Reaction at Constant P
DH = qrxn
No heat enters or leaves!
6.5
Because there is no way to measure the absolute value of
the enthalpy of a substance, must I measure the enthalpy
change for every reaction of interest?
Establish an arbitrary scale with the standard enthalpy of
formation (DH0f ) as a reference point for all enthalpy
expressions.
Standard enthalpy of formation (DH0f) is the heat change
that results when one mole of a compound is formed from
its elements at a pressure of 1 atm.
The standard enthalpy of formation of any element in its
most stable form is zero.
DH0f (O2) = 0
DH0f (C, graphite) = 0
DH0f (O3) = 142 kJ/mol
DH0f (C, diamond) = 1.90 kJ/mol
6.6
The enthalpy change required to break a particular bond in
one mole of gaseous molecules is the bond energy.
Bond Energy
DH0 = 436.4 kJ
H2 (g)
H (g) + H (g)
Cl2 (g)
Cl (g) + Cl (g) DH0 = 242.7 kJ
HCl (g)
H (g) + Cl (g) DH0 = 431.9 kJ
O2 (g)
O (g) + O (g) DH0 = 498.7 kJ
O
O
N2 (g)
N (g) + N (g) DH0 = 941.4 kJ
N
N
Bond Energies
Single bond < Double bond < Triple bond
9.10
Average bond energy in polyatomic molecules
H2O (g)
OH (g)
H (g) + OH (g) DH0 = 502 kJ
H (g) + O (g)
DH0 = 427 kJ
502 + 427
= 464 kJ
Average OH bond energy =
2
9.10
Bond Energies (BE) and Enthalpy changes in reactions
Imagine reaction proceeding by breaking all bonds in the
reactants and then using the gaseous atoms to form all the
bonds in the products.
DH0 = total energy input – total energy released
= SBE(reactants) – SBE(products)
9.10
H2 (g) + Cl2 (g)
2HCl (g)
2H2 (g) + O2 (g)
2H2O (g)
9.10
Use bond energies to calculate the enthalpy change for:
H2 (g) + F2 (g)
2HF (g)
DH0 = SBE(reactants) – SBE(products)
Type of
bonds broken
H
H
F
F
Type of
bonds formed
H
F
Number of
bonds broken
Bond energy
(kJ/mol)
Energy
change (kJ)
1
1
436.4
156.9
436.4
156.9
Number of
bonds formed
Bond energy
(kJ/mol)
Energy
change (kJ)
2
568.2
1136.4
DH0 = 436.4 + 156.9 – 2 x 568.2 = -543.1 kJ
9.10
Topic 15 – Year 2
Energetics HL
0 ) is the enthalpy of
The standard enthalpy of reaction (DHrxn
a reaction carried out at 1 atm.
aA + bB
cC + dD
DH0rxn = [ cDH0f (C) + dDH0f (D) ] - [ aDH0f (A) + bDH0f (B) ]
DH0rxn = S nDH0f (products) - S mDHf0 (reactants)
Hess’s Law: When reactants are converted to products, the
change in enthalpy is the same whether the reaction takes
place in one step or in a series of steps.
(Enthalpy is a state function. It doesn’t matter how you get
there, only where you start and end.)
6.6
C (graphite) + 1/2O2 (g)
CO (g) + 1/2O2 (g)
C (graphite) + O2 (g)
CO (g)
CO2 (g)
CO2 (g)
6.6
Calculate the standard enthalpy of formation of CS2 (l)
given that:
C(graphite) + O2 (g)
CO2 (g) DH0rxn = -393.5 kJ
S(rhombic) + O2 (g)
CS2(l) + 3O2 (g)
SO2 (g)
DH0rxn = -296.1 kJ
CO2 (g) + 2SO2 (g)
0 = -1072 kJ
DHrxn
1. Write the enthalpy of formation reaction for CS2
C(graphite) + 2S(rhombic)
CS2 (l)
2. Add the given rxns so that the result is the desired rxn.
C(graphite) + O2 (g)
2S(rhombic) + 2O2 (g)
+ CO2(g) + 2SO2 (g)
CO2 (g) DH0rxn = -393.5 kJ
2SO2 (g) DH0rxn = -296.1x2 kJ
CS2 (l) + 3O2 (g)
0 = +1072 kJ
DHrxn
C(graphite) + 2S(rhombic)
CS2 (l)
0 = -393.5 + (2x-296.1) + 1072 = 86.3 kJ
DH
rxn
6.6
Benzene (C6H6) burns in air to produce carbon dioxide and
liquid water. How much heat is released per mole of
benzene combusted? The standard enthalpy of formation
of benzene is 49.04 kJ/mol.
2C6H6 (l) + 15O2 (g)
12CO2 (g) + 6H2O (l)
DH0rxn = S nDH0f (products) - S mDHf0 (reactants)
DH0rxn = [ 12DH0f (CO2) + 6DH0f (H2O)] - [ 2DH0f (C6H6)]
DH0rxn = [ 12x–393.5 + 6x–187.6 ] – [ 2x49.04 ] = -5946 kJ
-5946 kJ
= - 2973 kJ/mol C6H6
2 mol
6.6
Electrostatic (Lattice) Energy
Lattice energy (E) is the energy required to completely separate
one mole of a solid ionic compound into gaseous ions.
Q+Q E=k
r
Q+ is the charge on the cation
Q- is the charge on the anion
r is the distance between the ions
Lattice energy (E) increases
as Q increases and/or
as r decreases.
cmpd
MgF2
MgO
LiF
LiCl
lattice energy
2957 Q= +2,-1
3938 Q= +2,-2
1036
r F- < r Cl853
9.3
Born-Haber Cycle for Determining Lattice Energy
o
DHoverall
= DHo1 + DHo2 + DHo3 + DHo4 + DHo5
9.3
9.3
Spontaneous Physical and Chemical Processes
• A waterfall runs downhill
• A lump of sugar dissolves in a cup of coffee
• At 1 atm, water freezes below 0 0C and ice melts above 0 0C
• Heat flows from a hotter object to a colder object
• A gas expands in an evacuated bulb
• Iron exposed to oxygen and water forms rust
spontaneous
nonspontaneous
18.2
Introduction to Entropy
Spontaneous physical changes are easy to predict. A dropped glass will fall to
the ground once it is released. The reverse of a spontaneous event, like water
flowing up a waterfall, will not occur except perhaps in the world of special
effects for movies.
The probability of finding a highly ordered situation (e.g., a deck of cards in
order) is much lower than a highly disordered one (in which the cards are
random). Chemical reactions or events are driven toward spontaneity by the
energetics of the process. Water will boil if heated to 100 °C at 1 atm.
Gas particles in one chamber will flow into an empty one (see figure: (a) is
spontaneous while (b) is not).
Does a decrease in enthalpy mean a reaction proceeds
spontaneously?
Spontaneous reactions
CH4 (g) + 2O2 (g)
CO2 (g) + 2H2O (l) DH0 = -890.4 kJ
H+ (aq) + OH- (aq)
H2O (l) DH0 = -56.2 kJ
H2O (s)
NH4NO3 (s)
H2O (l) DH0 = 6.01 kJ
H2O
NH4+(aq) + NO3- (aq) DH0 = 25 kJ
18.2
Entropy (S) is a measure of the randomness or disorder of a
system.
order
disorder
S
S
DS = Sf - Si
If the change from initial to final results in an increase in randomness
Sf > Si
DS > 0
For any substance, the solid state is more ordered than the
liquid state and the liquid state is more ordered than gas state
Ssolid < Sliquid << Sgas
H2O (s)
H2O (l)
DS > 0
18.3
Processes that
lead to an
increase in
entropy (DS > 0)
18.2
How does the entropy of a system change for each of the
following processes?
(a) Condensing water vapor
Randomness decreases
Entropy decreases (DS < 0)
(b) Forming sucrose crystals from a supersaturated solution
Randomness decreases
Entropy decreases (DS < 0)
(c) Heating hydrogen gas from 600C to 800C
Randomness increases
Entropy increases (DS > 0)
(d) Subliming dry ice
Randomness increases
Entropy increases (DS > 0)
18.3
Entropy
State functions are properties that are determined by the state
of the system, regardless of how that condition was achieved.
energy, enthalpy, pressure, volume, temperature, entropy
Potential energy of hiker 1 and hiker 2
is the same even though they took
different paths.
18.3
First Law of Thermodynamics
Energy can be converted from one form to another but
energy cannot be created or destroyed.
Second Law of Thermodynamics
The entropy of the universe increases in a spontaneous
process and remains unchanged in an equilibrium process.
Spontaneous process:
DSuniv = DSsys + DSsurr > 0
Equilibrium process:
DSuniv = DSsys + DSsurr = 0
18.4
Entropy Changes in the System (DSsys)
The standard entropy of reaction (DS0rxn ) is the entropy
change for a reaction carried out at 1 atm and 250C.
aA + bB
DS0rxn =
cC + dD
[ cS0(C) + dS0(D) ] - [ aS0(A) + bS0(B) ]
DS0rxn = S nS0(products) - S mS0(reactants)
What is the standard entropy change for the following
reaction at 250C? 2CO (g) + O2 (g)
2CO2 (g)
S0(CO) = 197.9 J/K•mol
S0(O2) = 205.0 J/K•mol
S0(CO2) = 213.6 J/K•mol
DS0rxn = 2 x S0(CO2) – [2 x S0(CO) + S0 (O2)]
DS0rxn = 427.2 – [395.8 + 205.0] = -173.6 J/K•mol
18.4
Entropy Changes in the System (DSsys)
When gases are produced (or consumed)
•
If a reaction produces more gas molecules than it
consumes, DS0 > 0.
•
If the total number of gas molecules diminishes,
DS0 < 0.
•
If there is no net change in the total number of gas
molecules, then DS0 may be positive or negative
BUT DS0 will be a small number.
What is the sign of the entropy change for the following
reaction? 2Zn (s) + O2 (g)
2ZnO (s)
The total number of gas molecules goes down, DS is negative.
18.4
Gibbs Free Energy
Spontaneous process:
DSuniv = DSsys + DSsurr > 0
Equilibrium process:
DSuniv = DSsys + DSsurr = 0
For a constant-temperature process:
Gibbs free
energy (G)
DG = DHsys -TDSsys
DG < 0
The reaction is spontaneous in the forward direction.
DG > 0
The reaction is nonspontaneous as written. The
reaction is spontaneous in the reverse direction.
DG = 0
The reaction is at equilibrium.
18.5
The standard free-energy of reaction (DG0rxn) is the freeenergy change for a reaction when it occurs under standardstate conditions.
aA + bB
cC + dD
0
DGrxn
= [cDG0f (C) + dDG0f (D) ] - [aDG0f (A) + bDG0f (B) ]
0
DGrxn
= S nDG0f (products) - S mDG0f (reactants)
Standard free energy of
formation (DG0f ) is the free-energy
change that occurs when 1 mole
of the compound is formed from its
elements in their standard states.
DG0f of any element in its stable
form is zero.
18.5
What is the standard free-energy change for the following
reaction at 25 0C?
2C6H6 (l) + 15O2 (g)
12CO2 (g) + 6H2O (l)
0
DGrxn
= S nDG0f (products) - S mDG0f (reactants)
0
DGrxn
= [12DG0f (CO2) + 6DG0f (H2O)] - [ 2DG0f (C6H6)]
0
DGrxn
= [ 12x–394.4 + 6x–237.2 ] – [ 2x124.5 ] = -6405 kJ
Is the reaction spontaneous at 25 0C?
DG0 = -6405 kJ < 0
spontaneous
18.5
DG = DH - TDS
18.5