Download Bony Anatomy of the Vertebral Column

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Body snatching wikipedia , lookup

Anatomical terms of location wikipedia , lookup

Anatomy wikipedia , lookup

Scapula wikipedia , lookup

Anatomical terminology wikipedia , lookup

Vertebra wikipedia , lookup

Transcript
Myology
Bony Anatomy of
the Vertebral
Column
1
Gross Anatomy
Osteology of the Spine
2
Spinal Anatomy
• Spine is made up of 24 small bones (vertebrae) that are stacked
on top of each other to create the spinal column.
• Between each vertebra is a soft, gel-like intervertebral disc that
helps absorb pressure and keeps the bones from rubbing
against each other.
• Each vertebra is held to the others by groups of ligaments
(connect bones to bones)
• Tendons connect muscles to bones. There are also tendons that
fasten muscles to the vertebrae.
• The spinal column also has real joints (just like the knee or
elbow or any other joints) called facet joints. The facet joints
link the vertebrae together and give them the flexibility to
move against each other.
3
• The spine itself has three main segments:
– Cervical spine
– Thoracic spine
– Lumbar spine
• The cervical is the upper part of the spine, made up of seven
vertebrae.
• The thoracic is the center portion of the spine, consisting of 12
vertebrae.
• The lower portion of the spine is called the lumbar spine,
consisting of five vertebrae.
4
5
Intervertebral Discs
• Between adjacent vertebrae absorbs vertical shock
• Permit various movements of the vertebral column
• Fibrocartilagenous ring (Annulus fibrosis) with a pulpy center
(Nucleus pulposus)
6
Normal Curves of the Vertebral Column
• Curves in vertebral column function to:
– Increase strength
– Maintain balance in the upright position
– Absorb shock during walking and running
– Protect spinal column from fracture
• Primary curves
– Thoracic and sacral are formed during fetal development
• Secondary curves
– Cervical is formed when infant raises head at 4 months
– Lumbar forms when infant sits up & begins to walk at 1
year
8
9
Anatomy of a typical vertebrae
• Body:
– Large, round portion of bone
– Superior and inferior surfaces are roughened for attachment of
intervertebral disc.
• Neural Arch: attached to the vertebral body consists of several
parts
– Pedicle: two thick processes which project posteriorly from the
body, uniting with the laminae.
• Vertebral notches: upper and lower indentations on the
pedical
• Intervertebral Foramen: Opening formed between adjacent
vertebrae (when stacked) for the exiting of a single spinal
nerve.
– Laminae: flat pieces of bone forming the posterior portion of
the vertebral arch
10
– Vertebral Foramen: space between the vertebral arch and
body containing the spinal cord, adipose, and areolar
connective tissue
– Vertebral (Spinal) Canal: formed by all vertebral
foramina of all vertebrae together.
• Processes: a total of 7 processes;
– Transverse process (2): extends laterally from the lamina
pedicle junction; functions for muscle attachment
– Spinous process (1): extends posteriorly from the junction
of the lamina; functions for muscle attachment
– Superior articulating process (2): articular processes that
form joints with the vertebrae above
– Inferior articulating process (2): articular processes that
form joints with the vertebrae below
• Facet: the articulating surface of the articular process.
11
12
Cervical Spine
• The cervical spine is made up of the first seven vertebrae in
the spine.
• It starts just below the skull and ends just above the thoracic
spine.
• The cervical spine has a lordotic curve (a backward C-shape)
• The cervical spine is much more mobile than both of the other
spinal regions.
• Unlike the rest of the spine, there are special openings in each
transverse process in the vertebra in the cervical spine for the
arteries supplying the brain.
• All of the cervical vertebrae with the exception of C1 and C7
have a bifid spinous process.
13
• Atypical Vertebrae: C1, C2, and C7
• Two vertebrae in the cervical spine, the atlas and the axis, differ
from the other vertebrae because they are designed specifically
for rotation. The 7th cervical vertebrae differs as it is marked by
its large spinous process.
• First cervical vertebra (Atlas):
– Sits between the skull and the rest of spine.
– Arches: atlas does not have a vertebral body, but does have a
thick forward (anterior) arch and a thin back (posterior) arch.
– Spinous process: atlas has no spinous process
– Lateral masses: in place of a vertebral body, the atlas has two
lateral masses which support the skull.
• Superior articular facets: located on superior aspect of the
facet articulating with the occipital condyles. This joint
allows for movement as in nodding the head “yes”
14
• Second cervical vertebra (Axis):
– Odontoid process: bony projection projecting upward from
the body through the front of the ring of the atlas.
• Allows rotation to the left and right
• 7th Cervical vertebra (Vertebra prominens):
– C7 has a large non-bifid spinous process
15
Atlas and Axis
16
C3 through C6 Vertebrae
• The remaining vertebrae (C3-C7) have the features of a more
typical vertebrae (bodies, spinous processes, transverse
processes, lamina, and pedicles).
17
18
Thoracic Spine
• The thoracic spine is made up of the middle 12 vertebra of the
spine.
• These vertebrae connect to the ribs and form part of the back
wall of the thorax (the ribcage area between the neck and the
diaphragm).
• The thoracic spine has very narrow, thin intervertebral discs,
so there is much less movement allowed between vertebrae
than in the lumbar or cervical parts of the spine.
• The thoracic spine's curve is called kyphotic because of its
shape, which is a regular "C"-shaped curve with the opening of
the "C" in the front.
19
• Body:
– Larger and stronger bodies than in the cervical spine
• Processes:
– Longer transverse & spinous processes
– Spinous processes are directed more inferior, so that they
overlap
• Facets or demifacets on body: articulating surfaces for the
articulation with the head of rib
– Facet: full indentation on the body of the thoracic
vertebrae
– Demifacet: half facet on the body of a thoracic vertebrae
• Facets on transverse processes (T1-T10): for articulation with
the tubercle of rib
20
21
22
Lumbar Spine
•
•
•
•
The lowest part of the spine
This area has five vertebrae.
Strongest & largest vertebrae
Short thick spinous & transverse processes
– Serves as attachment points for back musculature
23
24
Sacrum
• Triangular bone which curves anteriorly, formed by the union of five
sacral vertebrae, serving as a foundation for the pelvic girdle
• Anatomy:
– Sacral foramen: Anterior and posterior sacral foramen, allow
passage of the sacral nerves
– Sacral Ala (Wings): upper lateral portion of the sacrum formed
by the fusion of transverse processes.
– Median sacral crest: posterior ridge formed by the fusion of
sacral spinous processes
– Sacral canal: continuation of the vertebral canal. Ends as the
sacral hiatus which is an opening for the last spinal nerve.
– Articular surface: on both lateral surfaces for articulation with the
ilium of the pelvis.
– In the female, the sacrum is shorter, wider, and more curved
25
between S2-S3
Coccyx
• Also a triangular bone form by the fusion of four coccygeal
vertebrae.
• In the female the coccyx points inferiorly while in the male is
points more anteriorly.
26
27
Palpation of the Spine
Spinous process of the vertebrae (general): Seated; have your partner flex their head
and trunk slightly. Place your fingers along the centerline of the back and locate
the long line of processes. Slide your fingers slowly up and down the spine noting
the different sizes, prominences, and spaces between the process
a. Cervical spinous processes: Supine; locate the EOP and then slide your
fingers inferior onto the neck. The first palpable spinous process will be C2
(recall, C1 has a posterior tubercle). Continue palpating inferiorly gently until you
reach the C7 spinous (the most prominent of the cervical spinous processes).
Verify C7 by flexing your partner’s neck, C7 will move superiorly while T1 will
remain fixed.
Inferior angle and T7: Prone, locate the inferior angle of the scapula slide your
finger medially to the vertebral column. The spinous of T7 is in line with the
inferior angle.
Superior angle and T2: Prone, locate the superior angle of the scapula slide your
finger medially to the vertebral column. The spinous of T2 is in line with the
superior angle.
28
Top of iliac crest and L4: Prone; using the “knife edge” portion of your hand place
your hands on the tops of the iliac crests. Then slide your thumbs medially meeting
at the spine, the spinous process of L4 can be felt as a large knob.
Twelfth rib and T12: Prone; locate the lowest rib (12th) and palpate the shaft of the rib
back to the spinal column. The 12th rib may be lost as it passes under the large
erector spinae musculature.
Transverse processes of cervical vertebrae: Supine; place your fingers on the side of
the neck below the ear lobes. Using the flat thumbpads, slide anteriorly and
posteriorly to feel the ridge of the transverse processes. Note, the tips of the
individual TP’s are not usually palpable as the pass anterior and inferior.
Thoracic transverse process: Prone; locate a portion of the thoracic spinous
processes. Move about 1” laterally and palpate through the thick erector spinae
group for the knobby shaped transverse processes.
Lumbar transverse processes: Prone; locate the lumbar spinous processes and slide
about 2” laterally. Slowly sink your fingers through the thick erector spinae muscle,
directing your pressure at a medial angle. Because of the thick muscle, the
individual process may not be palpable, try to sense the solid ridge they form.
29
Cervical laminar groove: Supine; support the head with one hand and locate the
cervical transverse process with the other hand. Slide posteriorly off the transverse
processes, palpating the space between the transverse and the spinous processes
which is the laminar groove.
Thoracic and lumbar laminar groove: Prone; locate the spinous processes of the
thoracic vertebrae. With the other hand locate the transverse processes of the
thoracic vertebrae. Using firm pressure palpate the area between these two
landmarks. Work your way down the laminar groove to the lumbar spine. Note the
thick muscle of the transversospinalis group.
Sternum: Supine; place your fingers on the center of the chest. Then slide superiorly
toward the jugular notch at the top. Then move your fingers slightly lateral and
palpate the sternoclavicular joints (confirm by having your partner move their upper
extremity). Return to the sternum and palpate inferiorly onto the manubrium and
body. Finally, slide your fingers down onto the xiphoid process feeling the tip
between the costal cartilages.
Ribs: Supine; slide laterally from the sternum onto the costal cartilages. Roll off the
cartilage into the spaces between. Follow the costal cartilages laterally on to the
ribs.
30