Download No Slide Title - RAL Solar Orbiter

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

James Webb Space Telescope wikipedia , lookup

Lovell Telescope wikipedia , lookup

X-ray astronomy satellite wikipedia , lookup

Spitzer Space Telescope wikipedia , lookup

Optical telescope wikipedia , lookup

International Ultraviolet Explorer wikipedia , lookup

XMM-Newton wikipedia , lookup

Reflecting telescope wikipedia , lookup

Advanced Composition Explorer wikipedia , lookup

CfA 1.2 m Millimeter-Wave Telescope wikipedia , lookup

Transcript
Solar orbiter_______________________________________________
28-11-01
Summary.
Solar orbiter_______________________________________________
Martin Caldwell
Optical Systems Group
Space Science & technology Dept.
Rutherford Appleton Lab.
Design & layout of EUS for Solar Orbiter.
Summary.
•Requirements: Spatial, spectral, collecting power.
•Telescope options:
Front-end grating + 1-mirror telescope (Univ. Padova)
2-mirror on-axis (strawman).
2-mirror off-axis.
•Instrument layout.
•Spectrometer with holographic grating.
•Basic tolerances.
28-11-01
Requirements, optical
Solar orbiter_______________________________________________
Imaging.
Spatial: 0.5arcsec pixel, FOV 34 arcmin.
Spectral: 580-630ang, in 34 arcmin
}
Collecting power.
4.1012 photons/cm2.sr per second (typical line)
 ~ 600 ang
t ~ 1 second exposure
28-11-01
Square detector
~ 4000 x 4000
Requirements: Imaging
Solar orbiter_______________________________________________
Spatial.
APS detector, min. size p~5m for min. focal length FL
FL = p/(0.5arcsec) = 2.06 metres
Detector size 4000*5um= 20mm
Spectral.
sin . - sin.   m

d
 = 0 - normal incidence at detector m=-1
1st-order differential with respect to  :-

  d
20mm
50 Angst.

R
(1/4800 gr/mm)
28-11-01
(1:1 imaging,
conservative grating technology )
R ~ 800mm
Collecting power
Solar orbiter_______________________________________________
Parameter Name
eta
detector efficiency
tau
mirrors throughput
g
grating efficiency
B
A
omega
t
Product
photon radiance
aperture area
pixel fov solid angle
exposure time
Value
Units
0.4
0.008
0.3
4.00E+12
113.097336
5.8758E-12
1
2.55
Comment
3 mirrors
photons/cm^2.sr
cm^2
12cm aperture
steradian
0.5 arcsec pixel
seconds
photons
• 12cm aperture is reasonable limit given heat load problem
==> F-number = 2.06/0.12 ~ 17
Solar: 1371 watts/m2*25*0.0113 = 390 watts.
• Have to limit to 3 reflections.
28-11-01
Instrument layout & trade-offs
Solar orbiter_______________________________________________
1:1 spectrometer for simplest
grating. Approx. Rowland circle
~ 1:2 spectrometer for shorter
overall length =
Detector
array
Rowland
Circle diameter = RD

12cm
2-mirror telescope
Input
slit
Grating
(spherical,
holographic)
Length D << FL.
M2 size ~ (D/FL)*M1 size
28-11-01
~ 1 metre for current grating d=1/4800 gr/mm.
Scales with: d, 1/
Telescope options
Solar orbiter_______________________________________________
1. Front-end GI grating + single mirror telescope + spectrometer.
•Previously proposed (Univ. Padova) to separate heat at front-end.
•Light is pre-dispersed before spectrometer input slit.
•Relatively large size ~2m x 0.2m, tilted.
•Single mirror telescope (parabola), aberration control only at limited FOV
•Spatial: Possibility to improve via grating design.
•Spectral: No improvement possible after entrance slit.
•Assume 1m focal length (requiring 1:2 spectrometer), have ~15m
spot size at slit at FOV edge.
28-11-01
Telescope option 2. Two-mirror on-axis (straw-man).
Solar orbiter_______________________________________________
2. Good aberration control over required FOV.
• Image (slit) plane close to M1 to minimise length.
• M2 ~ (D/FL). M1
• D ~ 200 to 400mm
PROFILES
100,26.2319
D = 200mm
(D/FL) ~ 10 to 20 %
M2 ~ 12 to 24 mm
• Well-corrected, but
Field curvature ~ 2mm
Diameter
 ~12mm
20mm
Y
28-11-01
Z
-99.9999,-246.231 mm
ASAP Pro v7.0
2001-11-27 11:46
Telescope option 2. Two-mirror on-axis (straw-man).
Solar orbiter_______________________________________________
Heat dissipation.
Load on M2 is high, due to :
Beam concentration.
Limited motion of beam on M2versus field angle :rays from sun centre & sun limb
Sun centre
Sun limb
~ 80% of power from M1 hits M2
•M1 must be thermally absorbing
•Stringent opto-mechanical design
•large radiator panel needed
28-11-01
Y
Z
100,26.2319
Telescope option 3. Two-mirror, off-axis.
Solar orbiter_______________________________________________
PROFILES
307.017,115.962
Off-axis telescope & rays from full solar disc, blocked at heat stop
D = 400mm
Sun rays
+ - 1.25 deg
Heat stop
Entrance slit
perpendicular to page
Field curv. ~0.7mm
Y
Z
-184.294,-553.362 mm
28-11-01
ASAP Pro v7.0
2001-11-27 13:51
Telescope option 3. Two-mirror off-axis.
Solar orbiter_______________________________________________
• Solar image in M1, size ~ 2.5deg x 400mm = 17mm
• Heat stop aperture has to be curved & oversized due to aberrations.
select e.g. 34 x 10 arcmin = 2 % of solar power
Reduced flux on M2.
Reduced total load on spectrometer slit (same local flux)
• Design should allow M1 & stop to be heat-reflecting.
Reduced total absorbed power & so relaxed the cooler & radiator requirements.
28-11-01
Telescope option 3. Two-mirror off-axis.
Solar orbiter_______________________________________________
M1
Entrance
slit
Heat stop
M2
28-11-01
Spectrometer
Solar orbiter_______________________________________________
1:1 design, spherical variable-space holographic grating.
1:1 spherical VLS grating
•Normal incidence on
detector.
•Off-rowland for
holographic form
•580-630 Angst
480.519,152.301
800mm,  =16.7 deg
Detector
array
Grating
4800gr/
mm
Input slit
perpendicular
to page
Y
Z
-480.518,-1156.93 mm
28-11-01
ASAP Pro v7.0
2001-11-27 16:00
Spectrometer performance
Solar orbiter_______________________________________________
1:1 design, spherical holographic grating.
Spot diagram cf. 10um square (shown in blue)
605A On-axis
Hologram provides insufficient correction, need higher order grating function.
Spectral
630 A
F/5 DOE LENS WITH SIMPLE QUADRATIC PHASE
4.96957,16.3077
On-axis
Spatial
17 arcmin
X
28-11-01
Y
-18.3542,-15.4667 mm
ASAP Pro v7.0
2001-11-27 15:44
Tolerance sizes.
Solar orbiter_______________________________________________
1. absolute wavelength calibration, i.e. No requirement for stability between ground & use.
The spectrometer is self-calibrating in flight by being able to recognise known spectra.
2. Pointing is also calibrated in flight, e.g. by position of the solar limb.
(If these calibrations weren't so, optics would have to be stable to < 1 pixel, 0.5arcsec.)
3. Telescope Focus. If the focused spot were allowed to degrade by 2 um in diameter (~1/2
pixel) at the slit, the allowable two-mirror axial separation change would be ~3um, i.e.
~3um/200mm = 15 ppm relative. Active focus required ?
4. Slit axial position to telescope. 2um as above multiplied by F-no =17, giving ~34um.
4. Spectrometer focus. Grating axial (z) position relative to the telescope. For a 2um
increase in spot size at the detector this motion is allowed to be ~50um. Similar motions are
allowed in slit & detector position WRT the spectrometer.
28-11-01