* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download SP.764 Fall 04 - Problem Set 4
Survey
Document related concepts
Oscilloscope history wikipedia , lookup
Integrating ADC wikipedia , lookup
Valve RF amplifier wikipedia , lookup
Immunity-aware programming wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Surge protector wikipedia , lookup
Power electronics wikipedia , lookup
Transistor–transistor logic wikipedia , lookup
Wilson current mirror wikipedia , lookup
Power MOSFET wikipedia , lookup
Current source wikipedia , lookup
Schmitt trigger wikipedia , lookup
Voltage regulator wikipedia , lookup
Operational amplifier wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Opto-isolator wikipedia , lookup
Current mirror wikipedia , lookup
Transcript
SP.764 Fall 04 - Problem Set 4 Assume that the transistor has a 0 V to 5 V sine wave. =100 and that the AC wave generator is producing 1. Sketch a plot the output of the AC wave generator as a function of time. 2. Below that, sketch a plot of the base current (equal to the current through the 5k resistor) as a function of time. 3. Below that, sketch a plot of the current through the 100 Ohm resistor, as a function of time, assuming that the input voltage is +35.6 V. 4. Below that, sketch a plot of the voltage at the point A as a function of time. 5. Repeat steps 1-4 for the case where the input voltage is +5.6 Volts. MIT OpenCourseWare http://ocw.mit.edu EC.S06 / EC.S11 Practical Electronics Fall 2004 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.