Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download ELEC353 Analogue Electronics Practical 1: LTSpice
Document related concepts
Transcript
ELEC353 Analogue Electronics Practical 1: LTSpice ELEC353 will make use of LTSpice for circuit simulation. Check out the preliminary reading at http://elec.otago.ac.nz/w/index.php/ELEC_353 1 Enter and analyze a RC low-pass filter In LTSpice, draw the following RC circuit Perform AC anlysis, transient analysis. Do you get what you expect? (See beginner's guide for help with LTSpice.) 2 Enter and analyze a diode-C low-pass filter Repeat 1, but with the resistor replaced by a 1N914 diode. 3 Enter and analyze a transistor amplifier See exercise in beginners guide. Enter the circuit and perform DC analysis, transient analysis, AC analysis, as indicated in beginner's guide. ● ● ● ● ● ● 4 Report (should you decide to accept the task) Your report on this lab should include: An introduction A description of the experiments you have performed Screenshots from LTSpice that show your measurements An (electrical) analysis of the circuits that explain your measurements Any other relevant observations Some conclusions or summary
