Download TTL Logic Family

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Power engineering wikipedia , lookup

Tube sound wikipedia , lookup

Pulse-width modulation wikipedia , lookup

Alternating current wikipedia , lookup

Power inverter wikipedia , lookup

Resistive opto-isolator wikipedia , lookup

Solar micro-inverter wikipedia , lookup

Audio power wikipedia , lookup

Variable-frequency drive wikipedia , lookup

Rectifier wikipedia , lookup

Power electronics wikipedia , lookup

Metadyne wikipedia , lookup

Diode wikipedia , lookup

History of the transistor wikipedia , lookup

TRIAC wikipedia , lookup

Opto-isolator wikipedia , lookup

Rectiverter wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Buck converter wikipedia , lookup

Current mirror wikipedia , lookup

Transistor wikipedia , lookup

CMOS wikipedia , lookup

Transcript
TTL Logic Family
1
Introduction
• Uses bipolar technology including
NPN transistors, diodes and
resistors.
• The NAND gate is the basic building
block
• Contains different subfamilies with
varying characteristics such as
speed and power consumption
2
Standard TTL NAND Gate
A
B
Q1
Q2
Q3
Q4
Y
L
L
sat
off
off
Off
H
L
H
sat
off
off
Off
H
H
L
sat
off
off
Off
H
H
H
iam sat
sat
On
L
3
NAND Output Current
Sinking & Sourcing
4
Sinking
Sourcing
What is a totem pole?
In art and history….
Totem poles are carved and painted
vertical logs, constructed by many
northwest coast native American
Indian people. The poles display
mythological images, animal spirits
whose significance is their
association with the lineage.
5
Totem pole in TTL ?
• What is totem pole?
– addition of an active pull up circuit in the
output of a gate is called totem pole. Using
Q3 and Q4 to achieve this purpose
• Why totem pole?
– To increase the switching speed of the
gate which is limited due to the parasitic
capacitance at the output.
6
7
NOT Gate 7404
8
NOR Gate 7402
9
AND Gate 7408
10
OR Gate 7432
11
XOR Gate
12
Open Collector Output
13
Tristate Gate
14
Low Power TTL (74L)
Same as standard TTL
Except that the value
of the resistance is
increased to lower
power dissipation.
However, this is at the
expense of reduced
speed.
15
High Speed High Power
TTL (74H)
Reduced Resistors
increase power
dissipation.
Removed output
diode and added a
Darlington pair
transistor to
reduce output
resistance
16
Shottky Diode
17
Standard TTL Transistor
Switching Problem
• Trs are driven into deep saturation to fully
conduct, or cutoff to switch off.
• The result of deep saturation is that the two
junctions are now forward biased.
• The forward biasing of the BC junction
forces a large number of minority carriers
to the collector region.
• When the Tr switches off, these minority
carriers needs to be removed. This takes a
finite amount of time called the storage time
(major component of the propagation delay)
and thus increases the switch off time. 18
Solution 1
• Prevent the Tr from going deep in
saturation. This accomplished by
preventing the BC junction from
becoming forward biased.
• The Shottky diode is used to do the
above by placing it across the BC
junction. Because of its lower barrier
potential, it will conduct current from the
base directly to the collector before the
BC is forward biased. Thus less carriers
are stored in the collector area and the
switching becomes much faster.
19
SOLUTION 2
Normal Transistor
in saturation
Transistor with
Shottky diode in saturation
20
Schottky TTL (74S)
21
Low Power Shottky 74LS
22
23
Advanced Low Power Shottky 74ALS
• All saturating transistors are clamped by
using Schottky diodes.
• Inputs and outputs are clamped by
Schottky diodes
• New manufacturing and materials
reduce stray capacitance to increase
speed.
• active turn-off of the LOW-level output
transistor, producing a better HIGH-level
output voltage and thus a higher HIGH24
level noise immunity.
74ALS00
25