Download Ch 14 Trigonometry!! 14.1 The unit circle

Ch 14 Trigonometry!!
Ch 14 Trigonometry!!
14.1 The unit circle

Circumference

Arc length

Central angle

In Geometry, our definition of an angle was
the union of two rays with a common
endpoint.

Angle (trig) - measure of rotation from initial ray to
terminal ray

initial ray - the positive x-axis with endpoint at origin

terminal ray – ray with endpoint at origin

standard position – initial ray is the x-axis so we only
need to show the terminal ray and the rotation.

Counterclockwise rotation is “+”.
Clockwise rotation is “-”.


Coterminal angles are angles in standard position with
the same terminal ray.

Unit circle: A circle with center at the origin and a
radius of 1.
- Draw the unit circle
- Draw the following angles (degrees) in
standard position.
a) 45°
b) 135°
c) -45°
d) -225°
1) Find the length of the arc on the unit circle
formed by a 135 degree angle.
2) The terminal side of an angle contains the
point (5, -5). Find the measure of the angle.
3) Find the point of intersection of the unit
circle and the angle whose terminal side
contains the point (-7, -24).
4) The line
y
9
x
40
intersects the unit circle in
the second quadrant. Find the point of
intersection.