Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
CAPACITY BUILDING ON MODERNISING BUSINESS REGULATION Sue Holmes Assistant Commissioner, Productivity Commission 12 January 2011 Productivity Commission Some preliminaries (1) lots of discussion (2) RIA = RIS (3) the course is flexible – let me know what you would like change Productivity Commission 2 What is regulation? (1) very different definitions (2) some countries – subordinate instruments (3) Australia has taken a very broad definition for its reviews of regulation – anything made with the intention of changing the behaviour of businesses or individuals: from statutes to quasi regulation Productivity Commission 3 MODERNISING BUSINESS REGULATION: DAY 1 (1) Benefits of regulation review and reform (2) Compare the roles of the Malaysia Productivity Corporation and the Australian Productivity Commission (3) Elements of regulatory review (4) Australian regulatory review Productivity Commission 4 MODERNISING BUSINESS REGULATION : DAY 2 (1) Principles and values of the Productivity Commission (2) Elements of Regulation Impact Analysis (3) Exploring Elements of RIA More Fully • Identifying and describing the problem • Identifying options and recommendations Productivity Commission 5 MODERNISING BUSINESS REGULATION : DAY 3 Exploring Elements of RIA More Fully, ctd • Impact Analysis • regulatory burdens on business • Competition • Business Cost Calculator Productivity Commission 6 MODERNISING BUSINESS REGULATION : DAY 4 (1) Case Study: Oil and Gas in Australia and Malaysia (2) Instilling Commitment to Regulation Review and reform – Lessons Learned (3) Malaysia’s Regulatory Review System and the Role of the MPC Productivity Commission 7 OTHER THINGS WE COULD DISCUSS (1) risk analysis and risk managemeny (2) regulating in a federation (3) improving administration and enforcement (4) regulatory budgets and reducing the total regulatory burden (5) decreasing red tape Productivity Commission 8 benefits of reform Productivity Commission 9 Review and reform is ongoing regulation reform review Productivity Commission 10 1 Benefits of regulation review and reform: Australian experience (1) Australian economic performance declined during the 1970s (2) Numerous microeconomic and trade reforms since 1983 (3) Marked improvement in economic performance has since taken place Productivity Commission 11 Economic performance up to the 1980s • • The regime was highly regulated, anticompetitive and redistributive: • trade barriers to protect manufacturing • statutory government monopolies Relied on our exports of commodities to pay for this. Productivity Commission 12 Australia’s terms of trade 500 450 Terms of trade 400 350 300 250 Agriculture 200 150 100 50 1949- All goods 1959- Productivity Commission 1969- 1979- 1989- 13 1999- declining economic performance Australia’s GDP per person ranking had steadily declined: • • • • 1st at the start of the 20th century 5th in the world in 1950 9th by 1973 16th in 1990 Productivity Commission 14 Trade liberalisation came first • • • • • • Reductions in tariff assistance: • 25% reduction in 1973 From 1983, gradual abolition of quantitative import controls: • mainly cars, whitegoods and textile, clothing and footwear industries From 1988, a series of phased reductions in tariffs across most industry sectors By 1996, virtually all tariffs had fallen to 5 per cent or less. Effective rate of assistance to manufacturing fell from 35% in the early 1970s to 5% by 2000. Increased international competition in Australia’s traded goods sector led to pressures for reductions in input costs and greater flexibility. This led to a broad-ranging program of domestic microeconomic reform. Productivity Commission 15 Microeconomic and trade reforms Over the last 20 or so years, focus has been on removing policy-related distortions and impediments • • • • • • • • • Trade liberalisation Capital markets Infrastructure Labour markets Human services ‘National Competition Policy’ reforms Macroeconomic policy Taxation reform Better regulation making and review Productivity Commission 16 Capital markets • • • Australian dollar was floated in March 1983 foreign exchange controls and capital rationing (through interest rate controls) were removed progressively from the early 1980s foreign-owned banks were allowed to compete. Productivity Commission 17 Infrastructure • • From the late-1980s partial deregulation and restructuring: • airlines • coastal shipping • telecommunications • waterfront government business enterprises were progressively: • commercialised • corporatised • privatised. Productivity Commission 18 Labour markets • • shift from centralised wage fixing to enterprise bargaining, began in the late-1980s Workplace Relations Act 1996: • individual employment contracts Productivity Commission 19 Health, education and community services Reforms included: • competitive tendering and contracting out, performancebased • funding and user charges were introduced in the late-1980s and extended in scope during the 1990s • administrative reforms (for example, financial management and • program budgeting) were introduced in the early 1990s. Productivity Commission 20 ‘National Competition Policy’ reforms In 1995, a coordinated national program for progressing pro-competitive structural reforms across all states was established. It delivered broad-ranging reforms to: • essential service industries (including energy and road transport) • government businesses • anticompetitive regulation Legislative Review Program Productivity Commission 21 Reforms to macroeconomic policy • • inflation targeting was introduced in 1993 from the mid-1980s, fiscal policy targeted higher national saving (and a lower current account deficit) and, from the mid-1990s, concentrated on reducing government debt, primarily financed through asset sales (privatisation). Productivity Commission 22 Taxation reform • • • capital gains tax and the dividend imputation system were introduced in 1985 and 1987 the company tax rate was lowered progressively from the late-1980s a broad-based consumption tax (GST) was implemented in 2000, replacing the narrow wholesale-sales-tax system and a range of inefficient state-based duties. Income-tax rates were lowered at the same time. Productivity Commission 23 Better regulation making and review • • • • • • • • • Establishment of the Business Regulations Review Unit (BRRU) and RIA processes (1985) renamed Office of Regulation Review (ORR) (1989) renamed the Office of Best Practice Regulation (2006) Legislative Review program (1996) (competition policy) Report of the Small Business Deregulation Taskforce (Bell Review) (November 1996) Business Costs Calculator (BCC) (2005) Legislative Instruments Act 2003 (effective 2005) Report of the Taskforce on Reducing Regulatory Burdens on Business (Banks Review) (2006) Establishment of the COAG Reform Council (2006) Productivity Commission 24 Economic performance in the last 20 years OECD, Economic Survey of Australia, 2004 ‘The Government’s commitment to reform, its willingness to commission expert advice and to heed it, to try new solutions, and to patiently build constituencies that support further reforms, is … something that other countries could learn from.’ Productivity Commission 25 Improvements: Australia’s relative productivity performance Annual productivity growth (per cent) 4.0 Australia OECD 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1950-73 Productivity Commission 1973-90 1990-04 26 Economic performance in the last 20 years • Australia’s GDP grew by 3.5 per cent a year in the 1990s • faster than the United States • a third greater than that achieved by the OECD as a whole • performed extremely well during external crises: • the Asian financial crisis of 1997 • the bursting of the dot.com bubble • the Global Financial Crisis starting in 2008 Productivity Commission 27 Not just Australia: Benefits of regulation reform There is wide-ranging evidence that considered regulatory reform brings benefits to the economy: • better choices and lower prices for consumers and businesses • increased productivity • a more flexible economy, capable of adjusting to changes in demand and circumstances. Productivity Commission 28 Empirical evidence on the gains from modernising regulation • • • • • • • • • A number of studies have found that reforms to product regulation to increase competition, have the following positive effects: Growth: increases GDP per capita Encourages innovation Accelerates multi-factor productivity May stimulate employment Improves labour productivity Encourages domestic and foreign direct investments Increases investments in and the adoption of information and communication technology (ICT) services See Nicoletti and Scarpetta, 2003 study of OECD countries: • prescriptive product market regulations and lack of regulation reform were likely to explain the relatively poorer productivity performance of some European countries. Considered the same would be found for other countries. Productivity Commission 29 declining economic performance Australia’s GDP per person ranking started to improve again: • • • • • • 1st at the start of the 20th century 5th in the world in 1950 9th by 1973 16th in 1990 8th in 2002 6th in 2010 Productivity Commission 30 Broad effects of reform Australia’s per capita GDP ranking OECD countries, PPP 1990 US$ 0 2 4 Ranked 5th in 1950 6 Back to 6th by 1998 8 10 12 14 Dropped to 15th in 1983 16 1950 1954 1958 1962 1966 1970 1974 1978 1982 1986 1990 1994 1998 2002 2006 Productivity Commission 31 What were the benefits of past reforms? Real price changes Cross-subsidisation in favour of households removed 1990-91 to 2003-04 Electricity Gas Business -27% Other benefits Households 4% Business -12% Households 13% -40 -20 0 Productivity Commission 20 • Large reductions in telecommunications (-20%), ports (-50%) and milk (-5%) prices • Wider choice for consumers: longer shopping hours, new phone providers 40 32 What are the potential benefits of future reforms? NRA impacts on GDP 2 Health 0.42% Competiton 0.43% 1 Regulation 1.31% • Regulation reforms targeted at: – reducing compliance costs – Removing duplication • Current compliance costs around 4% of GDP – potential to reduce these by one-fifth 0 Productivity Commission 33 Regulatory design principles • • • • • • Provide rewards and incentives for compliance Nurture compliance capacity Prefer less intervention to more – minimum necessary to achieve objectives Use restorative justice when compliance fails Use regulatory responsiveness – enforcement pyramid – when restorative justice fails Target enforcement efforts to minimise risk Productivity Commission 34 Benefits of regulatory reform cont. • • • Increases job creation • Creates new job opportunities and thus reduces fiscal demands on social security Reduces risk of crisis due to external shocks Maintains and increases regulatory protections • In areas such as health and safety, the environment and consumer interests – by introducing more flexible and efficient regulatory and non-regulatory instruments such as market approaches Productivity Commission 35 Sectoral effects of regulatory reforms • • • Price reduction in real terms Road transport • Germany 30 • Mexico25 USA Airlines • UK 33 • USA 33 Productivity Commission France20 19 Spain 30 Australia 20 36 Price reductions in real terms • • • Electricity • Norway (spot market) 18-26.2 • UK 9-15.3 Financial services • UK 70.4 • USA 30-62.4 Telecommunications • Finland 66.5 Japan 41.6 • UK 63.6 Mexico 21.5 • Korea 10-30.7 Productivity Commission 37 Economy-wide effects of regulatory reform • GDP, long term effects (%) • USA 0.9 • Japan 5.6 • Korea 8.6 • Germany 4.9 • Netherlands 3.5 • France 4.8 • Greece 9-11 • Sweden 3.1 • UK 3.5 • Spain 5.6 Productivity Commission 38 MPC and PC Productivity Commission 39 2 Roles of the Productivity Commission and the MPC • Mission: • MPC: productivity enhancement for global competitiveness and innovation to better life. • PC: undertakes applied economic analysis of policy issues with a focus on helping governments to make better policies in the long term interest of the Australian community with a focus on achieving a more productive economy which is the key to higher living standards. Productivity Commission 40 2 Roles of the Productivity Commission and the MPC • Means: • MPC: value-added information on productivity, quality, competitiveness and best practices through research and databases • PC: independent research and advice on a range of economic, social and environmental issues affecting the welfare of Australians. • As an advisory body, its influence depends on the power of its arguments and the efficacy of its public processes. Productivity Commission 41 Commission’s broad range of work • Public reports addressing questions sent to us by the Government, for example: • executive remuneration • gambling • aged care • Public reports which monitor and compare performance: • government service provision • addressing indigenous disadvantage • particularly regulatory regimes, eg food safety • Research Productivity Commission 42 Malaysia Productivity Corporation ? Productivity Commission 43 Best practice regulatory review Productivity Commission 44 (2) Three Stages of Regulatory Reform Regulatory management Regulatory quality (RIA) Deregulation and simplification Productivity Commission 45 OECD regulatory governance principles • • • Deregulate where markets work better than governments Regulate where markets cannot work without government Establish systems to ensure laws are coherent and well managed Productivity Commission 46 OECD: Ways to improve government capacities to regulate well • • • • • • • • • • • • • • a) Building regulatory management system 1. Adopt regulatory reform policy at the highest political level. 2. Dynamic dimension of regulatory policy. 3. Establish explicit standards for regulatory quality and principles of regulatory decision-making. 4. Build regulatory management capacities. b) Improving the quality of new regulations 1. Regulatory Impact Analysis. 2. Systematic public consultation procedures with affected interests. 3. Using alternatives to regulation. 4. Improving regulatory co-ordination. c) Upgrading the quality of existing regulations 1. Reviewing and updating existing regulations. 2. Reducing red tape and government formalities. 3. Ex post evaluation. Productivity Commission 47 Aspects of good regulatory governance • explicit regulatory reform policy • explicit standards for regulatory quality • consider regulatory and non-regulatory alternatives • administrative simplification and reduced compliance costs • mechanisms for managing and coordinating regulation • greatest net-benefit from government intervention • transparent impacts (regulatory impact analysis) • avoid capture by specific interest groups Productivity Commission 48 Aspects of good regulatory governance cont. adoption and enforcement to the optimum degree transparent, non-discriminatory and efficiently applied systematic review and update • clearly articulate goals and strategies • public consultation procedures • domestic and foreign businesses know what regulations apply to them • appeals process; no undue delay to business decisions • • • • ensure they continue to meet intended objectives regulation impact analysis target regulations use automatic review methods evaluate results Productivity Commission 49 Australia’s regulatory review Productivity Commission 50 (4) Structure of Australian Regulation Review and Management Productivity Commission 51 New regulation • Adopted RIA in 1985 • Small Business Deregulation Task Force 1996 • the Legislative Instruments Act 2003 Productivity Commission 52 Review and reform old regulation • National Legislative Review of regulation if it restricted competition from 1996 • reviews of regulatory burdens by sector: • based on business complaint • benchmarking studies of particular regulatory regimes with focus on comparing compliance costs to business • Report of the Taskforce on Reducing Regulatory Burdens on Business (Banks Review) 2006 • National Reform Agenda starting in 2006 Productivity Commission 53 Regulatory Management System • training of public servants to understand good regulation • Productivity Commission as reform advocate • Cabinet miniser responsible for regulation reform from 2006 • a commitment from the Federal Governemnt to work in partnerships with the state governments to harmonise regulations in key areas Productivity Commission 54 Core elements of regulatory reform • Deregulation, clearer wording and reducing red tape • Regulatory Impact Analysis • Consultation • Using non-regulatory alternatives • Systematic review of existing regulation • Improving administration and enforcement • Build a regulatory management system Productivity Commission 55 Design issues for the RIA assessor • • • • • • • • • coverage: what regulation what triggers needing to do a RIA who assesses? who is the gatekeeper? consequences for non-compliance training public servants ensuring the assessor is consistent when is the RIA made public just advice to the decision-maker? Productivity Commission 56 Major national reform streams in Australia National Competition Policy (1995) NCP largely achieved 1995 2005 PC review of NCP (2005) Productivity Commission National Reform Agenda announced 2006 COAG Reform Agenda evolving 2007 PC reports on potential benefits of NRA 2008 Ongoing PC reports on COAG agenda 57 Productivity Commission origins • The Tariff Board was established in 1927 • the Industries Assistance Commission in 1973 • Industries Commission 1990 • Productivity Commission 1998 • Since 1973, 3 important features: • • Independence • • Openness • • Economy-wide mandate Productivity Commission 58 Independence • established by an Act of Parliament • only provides advice • no judicial, executive or administrative functions • Commissioners appointed by the Governor-General for up to five years and cannot be removed by the government Productivity Commission 59 Open and transparent public hearings draft reports for public comments annual report analysing the structure of assistance to Australian industry and its effects • government was obliged to release publicly all inquiry reports • • • • Productivity Commission 60 Economy-wide • concerned with improving the efficiency with which the economy uses its resources • take account of the interests of consumers and users of products and services not just the producer of them. Productivity Commission 61 Over time • Independence, openness and economy-wide mandate continue • Progressive changes • coverage extended beyond industry assistance matters • structural reform issues across all sectors of the economy • social and environmental spheres as well as economic. Productivity Commission 62 Where the Commission fits it concerns review department (Productivity Commission) Productivity Commission Cabinet Parliament (confidential RIA) (public RIA) 63 Our role The Productivity Commission is the Government’s principal review and advisory body on microeconomic policy reform and regulation Our role is to achieve better informed policy decisions through independent, published analysis and advice Productivity Commission 64 Core design features of the Commission 1. Independent • Underpinned by Act of Parliament • Operates separately from the Executive 2. Transparent • Open and public process • Published reports 3. Economy-wide perspective • ‘... to achieve higher living standards for all Australians ...’ Productivity Commission 65 Much of our work impacts on regulation Recommending and analysing the impact of proposed reforms 1. Most reviews of particular issues, eg gambling, make recommendations for changing relevant regulation 2. On a number of occasions we have been asked to assess how regulation reform will affect the economy, eg in 1995 the Commission modelled significant gains in growth and govt revenue from widespread competition reform. Productivity Commission 66 Much of our work impacts on regulation, ctd Analysing the impact of existing regulation 1. Periodic overviews of the state of regulation, highlighting where improvements are needed: “Banks Report” 2. Stocktakes of Commonwealth regulation which impacts on particular sectors, eg manufacturing 3. Benchmarking particular regulatory regimes across all levels of Australian government, eg food safety, OH&S Productivity Commission 67 Five broad categories of work …. Outputs in the form of …. Government commissioned projects •inquiries •studies Government commissioned performance reporting, benchmarking to governments/ COAG Government commissioned regulation review activities for governments/ COAG Competitive neutrality complaints activities Outcomes • Better informed policy decisions • Enhanced public awareness Productivity Commission 68 Supporting research and annual reporting on assistance Benchmarking program • All governments adopted a common framework for benchmarking, measuring and reporting on regulatory burdens. • Reviews so far: • 2007: feasibility study • 2008: business registrations quantity and quality of regulation • 2009: food safety (current) occupational health and safety (current) • 2010: expect 2 other areas – not yet announced Productivity Commission 69 Constraints • The focus is on the impact on business and not the wellbeing of all citizens. • We cannot make recommendations. • We cannot question the underlying objectives of the government regulation. • Risk of ‘review fatigue’. Productivity Commission 70 Scope of Task • Regulation is broadly defined • Involves existing regulation • post analysis of impacts versus ex ante analysis via RIA • Is about regulation from all levels of government in Australia: • local government • states/territories • Commonwealth (plus New Zealand for food safety). • Either involves regulatory regimes pursuing the same broad objectives (eg OHS) or a burden that stretches across a number of regulatory regimes (eg business registrations). Productivity Commission 71 Important features of this benchmarking exercise • ex post impact analysis – testing outcomes of the regulation making processes • regulators as well as regulation • uses ‘smart’ principles for promoting compliance • compares states and territories Productivity Commission 72 Commission’s broad range of work • Public reports addressing questions sent to us by the Government, for example: • executive remuneration • gambling • aged care • Public reports which monitor and compare performance: • government service provision • addressing indigenous disadvantage • particularly regulatory regimes, eg food safety • Research Productivity Commission 73 Benchmarking Regulatory Burdens on Business • Part of the Council of Australian Governments’s National Reform Agenda • to reduce regulatory burdens • especially unnecessary compliance costs • reduce regulatory duplication and overlap • concerned about regulations and regulators • Includes New Zealand Productivity Commission 74 The Task • Comparing governments. • Devise indicators which are likely to show which regulations/regulators impose greater burdens on business. • Analyse whether the higher costs are associated with better outcomes or if are unjustified. Productivity Commission 75 The exercise is consultative • complaints driven • public submissions • consultations held with governments, peak industry groups and companies • surveys • synthetic construction of compliance costs Productivity Commission 76 Broad findings: food safety (final) • Broadly regulators are doing a good job: • use enforcement pyramid – responsive regulation • apply risk management • mindful of reducing business burdens. • Increasingly in Australia, regulation focuses on raising awareness of food safety issues, with training, supervisors and risk management, rather than prescriptive input regulations, such as specifying what people should wear while preparing food. Productivity Commission 77 Broad findings: food safety regulation (ctd) • The core food safety regulators differ over: • taxpayer versus business funding • appeal mechanisms • transparency • the level of coordination of council activities achieved. • At local government level there are significant differences in councils’ fees and charges, inspection rates, risk ratings, enforcement instruments and transparency. Productivity Commission 78 Broad findings: food safety regulation (ctd) • In the regulation of internationally traded food, compared to New Zealand, Australia: • has higher fees • greater duplication • does not use electronic processing. Productivity Commission 79