Download DAYLIGHTING CONTROLLER Greengate Models DLC-PDC

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

MIL-STD-1553 wikipedia , lookup

Resistive opto-isolator wikipedia , lookup

Opto-isolator wikipedia , lookup

Transcript
DAYLIGHTING CONTROLLER
Greengate Models DLC-PDC
1. The Controller shall automatically switch a dry contact in response to changes in natural daylight.
2. The Controller shall be able to control incandescent, fluorescent or HID lighting.
3. It shall be possible to added an optional “Hold On” timer to prevent the short cycling of
HID lamps.
4. Each Controller shall be powered by 15VDC.
5. Each Controller shall have separate high and low fully adjustable set points which shall
allow for the precise switching of loads according to the selected light level
configuration.
6. The Controller’s low and high setpoints shall be separated by a deadband which shall
prevent the sensor from switching light levels between the setpoints, eliminating nuisance
or intermittent changes.
7. Signal/setpoint and relay status indication shall be provided along with calibration input
for adjustment.
8. The Controller shall be enclosed in a plastic enclosure for surface mounting installation
which meets flame retardant requirements of UL standard 94V-0.
9. The Controller shall provide a 10A low voltage Form C relay output.
10. The DAYLIGHTING Controller shall be Greengate Model DLC-PDC.
Cooper Controls
203 Cooper Circle
Peachtree City, GA 30269
P: 800-553-3879
F: 800-954-7016
www.coopercontrol.com
ACC081039
Page 1 of 1