Download Document

BayTech
®
The Power to Control
Global Power Management
BayTech Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
 Notification of Alerts via E-mail
 Graphically Displays Power Environments per RPC
 Provides Graphical Reporting for Any Segment
or Organization Node.
 Exposes an Enterprise Security Model for Access
to Power Control
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
Global Power Management can detect BayTech SNMP devices on local
subnets or can assign IP addresses that allow for the discovery of remote
BayTech SNMP devices.
Once discovered, a status screen will display the controllers and associated
RPC’s with their receptacles.
Automatic Discovery of BayTech SNMP Devices
Discover controllers on the same subnet, or enter the IPs of remote controllers.
Status Screen for Discovered BayTech Controllers
The status screen provides a snap shot of all
BayTech power solutions. Controllers, RPC’s and
Outlets are displayed. On/ Off/ Reboot and status
functions are supported by a simple “right click”
of the mouse.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
One of the powerful features of GPM is the ability to group equipment
in multiple configurations. Whether you need to view a data center
server cabinet by location or view all Unix servers together, GPM lets
you customize groups to fit your requirements.
Logical Views of RPC’s in Remote Locations
Tree Views show logical
or functional views of
data centers.
Equipment can be
grouped in multiple
configurations.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
Through an easy to use “drag and drop” interface, you can assign device names (servers)
for single or multiple receptacles. These receptacles can be assigned from any active
controller in the Power Management Network.
A single device name can support any number of receptacles. If you want to turn on or off
a group of devices during critical power outages, you can simply do this with the click of a
button.
Power sequence can be assigned to devices with multiple receptacles. This is useful for
bringing up device power supplies in a desired sequence.
Supports Equipment with Single or Redundant
Power Supplies
Support redundant
power sources and
assign multiple
receptacles to any
device.
Simply drag
discovered
receptacles
from outlet list
to device name.
Power Sequence Any Supply on Any Device
GPM allows you to sequence power supplies in any order.
Delays can be set between operations.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
Simply “right click” on any device name with an assigned receptacle and you can turn
on/off or reboot that device. The option to remove or change the name of this device is
provided at this point.
Provides Easy “Click Through” Control of RPC’s Anywhere
Simply “right
click” on defined
equipment and
you have the
option(s) to turn
on/off or reboot
the equipment.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
GPM maintains a list of all alerts received from RPC devices that are being monitored.
Clicking an alert will trigger the GPM’s tree view and allow the user to drill down to
the specific devices causing the alert.
Displays Alerts for Grouped or Individual RPC’s
The “Alerts” view displays all SNMP traps received for
all controllers monitored by GPM. Selecting the alert
automatically navigates the user to the physical
location within the organization.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
 Notification of Alerts via E-mail
GPM allows a user to monitor and to receive alarms based on the BayTech SNMP MIB.
E-mails and associated messages can be sent to individuals or groups.
The GPM configuration provides a means to pick and to choose which alerts will be
flagged for notification.
Environmental Alarm Thresholds Set per RPC
Current, voltage and temperature thresholds can be set for every circuit in your in
your data center. Based on thresholds and trap settings, NOC personnel can be
notified via e-mail when circuits reach capacity.
Customized Alerts are Based on Preset Conditions
E-mail Alerts Sent to Single or Multiple Recipients
To: [email protected]
Subject: Global Power Management Alert !!! -- Please Review Immediately
*--ALERT--**--ALERT--**--ALERT--**--ALERT--**--ALERT--**--ALERT--*
Baytech Power Management Message:
Subject
Sent To
Date/Time
Controller Name
Controller Ip
Power Strip Name
Location
Outlet(s) Name
:Outlet(s) turned OFF
:[email protected],[email protected]
:20020827
:NORLINX CONTROLLER IN CABINET 1
:66.83.91.37
:BT RPC4-1001092
:Raleigh Data Center
:(1) - alexnorth008329
(2) – Server 1
(3) - Server 2
(4) - Outlet 3
(5) - Outlet 4
(6) - Outlet 5
(7) - Outlet 6
(8) - Outlet 7
(9) – Outlet 8
(10) – Outlet 9
(11) – Outlet 10
(12) - Outlet 11
(13) - Outlet 12
(14) - Outlet 13
(15) - Outlet 14
(16) - Outlet 15
*--ALERT--**--ALERT--**--ALERT--**--ALERT--**--ALERT--**--ALERT--*
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
 Notification of Alerts via E-mail
 Graphically Displays Power Environments per RPC
GPM graphically displays the circuit power environment. Prior to adding devices,
NOC managers can easily check the capacity of a circuit. This enables them to
make informed decisions as to whether or not more equipment should be added.
Graphically Displays Power Environments Per RPC
The power
environment is
displayed
through
graphical and
textual
displays.
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
 Notification of Alerts via E-mail
 Graphically Displays Power Environments per RPC
 Provides Graphical Reporting for Any Segment
or Organization Node
 Exposes an Enterprise Security Model for Access
to Power Control
Power Utilization
View a power utilization in any segment of the data center by
simply clicking the segment. For example, clicking on IBM
Cabinet1 would yield combined power utilization for that
cabinet. This could be extended to the entire Raleigh segment,
again by simply clicking on Raleigh.
Power Utilization over Time
Graph power, voltage, current, max current and temperature over a
specified time interval. The detection of these power and
temperature trends within any segment of the datacenter or
organization allows for simplified analysis and forecasting.
Exposes Enterprise Security and Control Access
WinNT/2000
Domains expose
the power
infrastructure.
Administrators
can drag users
or groups to any
level within the
organizational
structure.
Users and
groups can be
assigned
specific
operations.
WinNT/2000 Login
Global Power Management
GPM Software for BayTech
Remote Power Controllers
 Discovers BayTech Devices on Existing Subnets
 Builds Logical and Functional Views of RPC’s in Remote Locations
 Supports Equipment with Single or Redundant Power Supplies
 Provides Easy “Click Through” Control of RPC’s Anywhere
 Displays Alerts for Grouped or Individual RPC’s
 Notification of Alerts via E-mail
 Graphically Displays Power Environments per RPC
 Provides Graphical Reporting for Any Segment
or Organization Node
 Exposes an Enterprise Security Model for Access
to Power Control