Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
5/22/2017 Norah Ali Al Moneef king Saud university 1 W = F. Δx units: N.m or joule, j • W = F Δx cos q • Work = the product of force and displacement, times the cosine of the angle between the force and the direction of the displacement. • How much work is done pulling with a 15 N force applied at 20o over a distance of 12 m? • W = FΔx cos q • W = 15 N (12 m) (cos 20) = 169J 5/22/2017 Norah Ali Al Moneef king Saud university 20o 2 Sign of work: +ve work: Force acts in the same direction as the displacement. object gains energy ve work: Force acts in the opposite direction as the displacement. object loses energy When force F is at right angles to displacement s (F ⊥s): cos 90 = 0 F Δx cos q = 0 No work is done on the load 5/22/2017 No work is done if: F=0 or Δx = 0 or q = 90o Norah Ali Al Moneef king Saud university 3 Example: When Work is Zero • • • • • A man carries a bucket of water horizontally at constant velocity. The force does no work on the bucket Displacement is horizontal Force is vertical cos 90° = 0 26/08/1438 Norah Ali Al - moneef 4 example 26/08/1438 Norah Ali Al - moneef 5 example • An Eskimo returning pulls a sled as shown. The total mass of the sled is 50.0 kg, and he exerts a force of 1.20 × 102 N on the sled by pulling on the rope. How much work does he do on the sled if θ = 30° and he pulls the sled 5.0 m ? W ( F cos q ) x (1.20 10 2 N )(cos 30 )(5.0m) 5.2 10 2 J • Suppose µk = 0.200, How much work done on the sled by friction, and the net work if θ = 30° and he pulls the sled 5.0 m ? Fnet , y N mg F sin q 0 W fric ( f k cos180 )x f k x N mg F sin q k Nx k (mg F sin q )x (0.200)(50.0kg 9.8m / s 2 Wnet WF W fric WN Wg 5.2 10 2 J 4.3 10 2 J 0 0 90.0 J 26/08/1438 1.2 10 2 N sin 30 )(5.0m) 4.3 10 2 J Norah Ali Al - moneef 6 Example : A horizontal force F pulls a 10 kg carton across the floor at constant speed. If the coefficient of sliding friction between the carton and the floor is 0.30, how much work is done by F in moving the carton by 5m? The carton moves with constant speed. Thus, the carton is in horizontal equilibrium. F = f = μk N = μk mg. Thus F = 0.3 x 10 x 9.8 = 29.4 N Therefore work done W = FS =(29.4 Cos 0o) =147 J 26/08/1438 Norah Ali Al - moneef 7 6-2 Kinetic Energy 1 KE mv 2 2 Same units as work Remember the Eq. of motion v 2f vi2 ax 2 2 1 1 Multiply both sides by m, 2 mv f mvi2 max 2 2 KE f KEi Fx W = F x KE f KE i W net Work-Energy Theorem W = K When work is done on a system and the only change in the system is in its speed, the work done by the net force equals the change in kinetic energy of the system. The speed of the system increases if the work done on it is positive ( the kinetic energy of the particle increases). The speed of the system decreases if the net work done on it is negative( the kinetic energy of the object decreases). 5/22/2017 Norah Ali Al Moneef king Saud university 8 An object’s kinetic energy depends on its mass and its speed. The faster something is moving and the heavier it is, the more work it can do, so … If ‘v’ tripled then KE will increase by 9 times. If ‘v’ quadruples, then KE will increase by 16 times example M= 4 kg 26/08/1438 Norah Ali Al - moneef 9 • Do changes in velocity and mass have the same effect on kinetic energy? • No—changing the velocity of an object will have a greater effect on its kinetic energy than changing its mass. • This is because velocity is squared in the kinetic energy equation. • For instance, doubling the mass of an object will double its kinetic energy. • But doubling its velocity will quadruple its kinetic energy. 5/22/2017 Norah Ali Al Moneef king Saud university 10 example • A 1500 kg car moves down the freeway at 30 m/s K.E. = ½(1500 kg)(30 m/s)2= 675,000 kg·m2/s2 = 675 kJ • A 2 kg fish jumps out of the water with a speed of 1 m/s K.E. = ½(2 kg)(1 m/s)2= 1 kg·m2/s2 = 1 J •Calculate the work done by a child of weight 300N who climbs up a set of stairs consisting of 12 steps each of height 20cm. work = force x distance the child must exert an upward force equal to its weight the distance moved upwards equals (12 x 20cm) = 2.4m work = 300 N x 2.4 m= 720 J 5/22/2017 Norah Ali Al Moneef king Saud university 11 Kinetic Energy – the energy of motion • KE = ½ m v 2 • units: kg (m/s) 2 = (kgm/s2) m • = Nm = joule • Work Energy Theorem: W = KE • Work = the change in kinetic energy of a system. Note: v = speed NOT velocity. The direction of motion has no relevance to kinetic energy. Example : A 6 kg bowling ball moves at 4 m/s. a) How much kinetic energy does the bowling ball have? b) How fast must a 2.5 kg tennis ball move in order to have the same kinetic energy as the bowling ball? K = ½ mb vb² KE = 48 J KE = ½ mt vt² 5/22/2017 K = ½ (6 kg) (4 m/s)² v = √2 K/m = 6.20 m/s Norah Ali Al Moneef king Saud university 12 M=6.00 kg F ma a F 12 2m / s 2 m 6 2 2 v v0 2ax v 2ax 1/ 2 Another solution 3.46m / s F ma a F 12 2m / s 2 m 6 2 2 v v0 2ax v 2ax 1/ 2 26/08/1438 Norah Ali Al - moneef 3.46m / s 13 Example : A 6.0-kg block initially at rest is pulled to the right along a horizontal, frictionless surface by a constant horizontal force of 12 N. Find the speed of the block after it has moved 3.0 m. W =F d cos 0 =12x 3x1 = 36J Δk = w 0.5m V2 =W =36 J 1 6(v) 2 36 J 2 v 12 3.46 m / s 26/08/1438 Norah Ali Al - moneef 14 Example What acceleration is required to stop a 1000kg car traveling 28 m/s in a distance of 100 meters? 1 mv 2 max 2 1 ( 28) 2 a 100 2 784 a 3.92m / s 2 200 26/08/1438 Norah Ali Al - moneef 15 example example 5/22/2017 Norah Ali Al Moneef king Saud university 16 example Calculate the speed of a car of mass 1200kg if its kinetic energy is 15 000J K = ½ m v2 15 000J = ½ x 1200kg x v2 15 000 = 600 x v2 15 000 ÷ 600 = v2 25 = v2 v = 25 speed = 5.0 ms-1 5/22/2017 Norah Ali Al Moneef king Saud university 17 example Calculate the braking distance a car of mass 900 kg travelling at an initial speed of 20 ms-1 if its brakes exert a constant force of 3 kN. k.E. of car = ½ m v2 = ½ x 900kg x (20ms-1)2 = ½ x 900 x 400 = 450 x 400 k = 180 000 J 5/22/2017 The work done by the brakes will be equal to this kinetic energy. W = F Δx 180 000 J = 3 kN x Δx 180 000 = 3000 x Δx Δx = 180 000 / 3000 braking distance = 60 m Norah Ali Al Moneef king Saud university 18 • An object does not have to be moving to have energy. • Some objects have stored energy as a result of their positions or shapes. • When you lift a book up to your desk from the floor or compress a spring to wind a toy, you transfer energy to it. • The energy you transfer is stored, or held in readiness. • It might be used later when the book falls to the floor • Stored energy that results from the position or shape of an object is called potential energy. • This type of energy has the potential to do work. 5/22/2017 Norah Ali Al Moneef king Saud university 19 Gravitational Potential Energy • Potential energy related to an object’s height is called gravitational potential energy. • The gravitational potential energy of an object is equal to the work done to lift it. • Remember that Work = Force × Distance. • The force you use to lift the object is equal to its weight. • The distance you move the object is its height. • You can calculate an object’s gravitational potential energy using this formula: • Gravitational Potential Energy = Weight x Height change in Gravitational potential energy . = mass x gravitational field strength x change in height ΔU = m g Δh 5/22/2017 Norah Ali Al Moneef king Saud university 20 Gravitational potential energy: Ug m g h -Potential energy only depends on y (height) and not on x (lateral distance) -MUST pick a point where potential energy is considered zero! U g U U o mg ( h ho ) U g U U o mg (h ho ) 5/22/2017 Norah Ali Al Moneef king Saud university 21 example Calculate the change in Gravitational potential energy (g.p.e). when a mass of 200 g is lifted upwards by 30 cm. (g = 9.8 Nkg-1) ΔU = m g Δh = 200 g x 9.8 Nkg-1 x 30 cm = 0.200 kg x 9.8 Nkg-1 x 0.30 m = 0.59 J change in g.p.e. = 0.59 J example What is the potential energy of a 12 kg mass raised from the ground to a to a height of 25 m? Potential Energy = weight x height change Weight = 12 x 10 = 120 N Height change = height at end - height at start = 25 - 0 = 25 m Potential energy = 120 x 25 = 3000 J 5/22/2017 Norah Ali Al Moneef king Saud university 22 example Calculate the gravitational potential energy in the following systems a. a car with a mass of 1200 kg at the top of a 42 m high hill (1200 kg)( 9.8m/s/s)(42 m) = 4.9 x 105 b. a 65 kg climber on top of Mt. Everest (8800 m high) (65 kg) (9.8m/s/s) (8800 m) = 5.6 x 106 J c. a 0.52 kg bird flying at an altitude of 550 m (.52 kg) (9.8m/s/s)(550) = 2.8 x 103 J 5/22/2017 Norah Ali Al Moneef king Saud university 23 26/08/1438 Norah Ali Al - moneef 24 example Who is going faster at the bottom? • Assume no friction • Assume both have the same speed pushing off at the top same 26/08/1438 Norah Ali Al - moneef 25 Conservation of Energy • Law of conservation of energy - energy cannot be created or destroyed closed system: - all energy remains in the system - nothing can enter or leave open system: - energy present at the beginning of the system may not be at present at the end 5/22/2017 Norah Ali Al Moneef king Saud university 26 Conservation of Energy • When we say that something is conserved it means that it remains constant, it doesn’t mean that the quantity can not change form during that time, but it will always have the same amount. • Conservation of Mechanical Energy: MEi = MEf • initial mechanical energy = final mechanical energy If the only force acting on an object is the force of gravity: Ko + Uo = K + U ½ mvo² + mgho = ½ mv² + mgh 5/22/2017 Norah Ali Al Moneef king Saud university 27 example • At a construction site a 1.50 kg brick is dropped from rest and hit the ground at a speed of 26.0 m/s. Assuming air resistance can be ignored, calculate the gravitational potential energy of the brick before it was dropped? K+U = Ko+Uo ½ mv2+mgh=½ mv2o+ mgho ½ mv2+0 = =o+ mgho U0 = mgho = ½ (1.50 kg) (26.0m/s)2 = 507 J 5/22/2017 Norah Ali Al Moneef king Saud university 28 example A child of mass 40 kg climbs up a wall of height 2.0 m and then steps off. Assuming no significant air resistance calculate the maximum: (a) gravitational potential energy (gpe) of the child (b) speed of the child g = 9.8 Nkg-1 5/22/2017 (a) maximum gravitational potential energy ( max gpe) occurs when the child is on the wall Δ U = mgΔh = 40 x 9.8 x 2.0 max gpe = 784 J (b) max speed occurs when the child reaches the ground ½ m v2 = m g Δh ½ m v2 = 784 J v2 = (2 x 784) / 40 v2 = 39.2 v = 39.2 max speed = 6.3 ms-1 Norah Ali Al Moneef king Saud university 29 example A 10 kg shopping cart is pushed from rest by a 250 N force against a 50 N friction force over 10 m distance. m = 10.0 kg vi = 0 Fp = 250.0 N Fk = 50.0 N Δx = 10.0 m A. How much work is done by each force on the cart? Wg = 0 WN = 0 Wp = Fp Δx cos q= (250.0 N)(10.0 m)cos 0 FN Fk Fp Fg Wp = 2500 J Wk = Fk Δx cos q= (50.0 N)(10.0 m)cos 180= -500 J 5/22/2017 Norah Ali Al Moneef king Saud university 30 B. How much kinetic energy has the cart gained? Wnet = ∆KE Wp + Wk = KEf - KEi 2500 J + -500 J = KEf - 0 KEf = 2000J C. What is the carts final speed? KE = 1/2 m v2 v = √((2KE)/(m)) v = √((2(2000 J))/(10.0 kg)) 5/22/2017 v = 20 m/s Norah Ali Al Moneef king Saud university 31 example At B At C 26/08/1438 Norah Ali Al - moneef 32 A truck of mass 3000 kg is to be loaded onto a ship using a crane that exerts a force of 31 kN over a displacement of 2m.Find the upward speed of truck after its displacement. 26/08/1438 Norah Ali Al - moneef 33 Nonconservative Forces • A nonconservative force does not satisfy the conditions of conservative forces • Nonconservative forces acting in a system cause a change in the mechanical energy of the system • The work done against friction is greater along the brown path than along the blue path • Because the work done depends on the path, friction is a nonconservative force K U K 0 U 0 W friction K U K0 U 0 fk d K U K 0 U 0 µk N d 5/22/2017 Norah Ali Al Moneef king Saud university 34 Work and Energy • If a force (other than gravity) acts on the system and does work • Need Work-Energy relation PEi KEi W PEf KEf • or 1 1 2 mghi mvi W mghf mv 2f 2 2 26/08/1438 Norah Ali Al - moneef 35 example On a frozen pond, a person kicks a 10.0 kg sled, giving it an initial speed of 2.2 m/s. How far does it travel if the coefficient of kinetic friction between the sled and the ice is .10? W = ∆KE FΔx= Kf - Ki m = 10.0 kg vi = 2.2 m/s vf = 0 m/s µk = .10 µk = Fk / FN Fk = µk (mg) µk (-mg) Δx = 1/2 m vf2 - 1/2 m vi2 µk (-mg) Δx = - 1/2 m vi2 Δx = (- 1/2 m vi2) / µk (-mg) Δx = (- 1/2 (10.0 kg) (2.2 m/s)2) / (.10 (-10.0 kg) (9.8 m/s2)) Δx = 2.47 m 5/22/2017 Norah Ali Al Moneef king Saud university 36 Example A 20-g projectile strikes a mud bank, penetrating a distance of 6 cm before stopping. Find the stopping force F if the entrance velocity is 80 m/s. W =Δ K F Δ x cosθ = K – K0 W = ½ mv² - ½ mvo² =0 F Δ x cosθ = ½ mv² - ½ mvo² F (0.06 m) cos 1800 = 0 - 0 .5 (0.02 kg)(80 m/s)2 F (0.06 m)(-1) = -64 J F = 1067 N Work to stop bullet = change in K.E. for bullet 5/22/2017 Norah Ali Al Moneef king Saud university 37 example A bus slams on brakes to avoid an accident. The tread marks of the tires are 80 m long. If μk = 0.7, what was the speed before applying brakes? Work = F Δx (cos θ) f = μk.N = μk mg Work = - μk mg Δx ΔK = 1/2 mv2 - ½ mvo2 W = ΔK vo = (2μk g Δ x) ½ 5/22/2017 Norah Ali Al Moneef king Saud university 38 Example Suppose the initial kinetic and potential energies of a system are 75J and 250J respectively, and that the final kinetic and potential energies of the same system are 300J and -25J respectively. How much work was done on the system by non-conservative forces? 1. 0J 2. 50J correct 3. -50J 4. 225J 5. -225J Work done by non-conservative forces equals the difference between final and initial kinetic energies plus the difference between the final and initial gravitational potential energies. W = (300-75) + ((-25) - 250) = 225 - 275 = -50J. 26/08/1438 Norah Ali Al - moneef 39 26/08/1438 Norah Ali Al - moneef 40 example You are towing a car up a hill with constant velocity. A )The work done on the car by the normal force is: 1. positive 2. negative 3. zero FN V T correct The normal force is perpendicular to the displacement, hence, does no work. W b )The work done on the car by the gravitational force is: 1. positive 2. negative 3. zero correct With the surface defined as the x-axis, the x component of gravity is in the opposite direction of the displacement, therefore work is negative. C ) The work done on the car by the tension force is: 1. positive 2. negative 3. zero 26/08/1438 correct Tension is in the same direction as the displacement. Norah Ali Al - moneef 41 26/08/1438 Norah Ali Al - moneef 42 • • • • • Power is the rate at which work is done. Power is the rate of energy transfer by any method. The SI unit of power is the watt, W 1 watt = 1 Joule/s Work 1000 watts = 1 kW Power Work = force · distance Power = force·distance/time Power = force·velocity time P = F·v KE Fx P 5/22/2017 t t Norah Ali Al Moneef king Saud university 43 example Calculate the power of a car engine that exerts a force of 40 kN over a distance of 20 m for 10 seconds. W = FΔx = 40 kN x 20 m = 40 000 x 20 m = 800 000 J example P = ΔW / Δt = 800 000 J / 10 s power = 80 000 W • In 1935, R. Goddard, the America rocket pioneer, launched several A-series sounding rockets. Given that the engine had a constant thrust of 890 N, how much power did it transfer to the rocket while traveling at its maximum speed of 113.9 m/s. • P = Fv = 890N x 313.9 m/s = 279 kW. 5/22/2017 Norah Ali Al Moneef king Saud university 44 example • Together, two students exert a force of 825 N in pushing a car a distance of 35 m. • A. How much work do they do on the car? • W = F Δx = 825N (35m) = • B. If the force was doubled, how much work would they do pushing the car the same distance? • W = 2F Δx = 2(825N)(35m) = 5/22/2017 Norah Ali Al Moneef king Saud university 45 Power Delivered by an Elevator Motor A 1000-kg elevator carries a maximum load of 800 kg. A constant frictional force of 4000 N retards its motion upward. What minimum power must the motor deliver to lift the fully loaded elevator at a constant speed of 3 m/s? Fnet , y may Since the speed is constant, so a=0 T f Mg 0 where M = total mass of the system M= 1000+800=1800 Kg T f Mg 2.16 104 N P Fv (2.16 104 N )(3m / s) 26/08/1438 6.48 104W Norah Ali Al - moneef 46 example OR 26/08/1438 Norah Ali Al - moneef 47 example In a rifle barrel, a 15.0 g bullet is accelerated from rest to a speed of 780 m/s. a)Find the work that is done on the bullet.? Using Work-Kinetic Energy Theorem, W = ΔKE W = KEf - KEi W = 1/2(0.015 kg)(780 m/s)2 - 0 W = 4.56 kJ b) If the rifle barrel is 72.0 cm long, find the magnitude of the average total force that acted on the bullet. Using W = Fcosθd, F = (4.56 kJ) / (0.72 m) F = 6.33 kN 26/08/1438 Norah Ali Al - moneef 48 example A rock climber wears a 7.5 kg backpack while scaling a cliff. After 30.0 min, the climber is 8.2 m above the starting point. a. How much work does the climber do on the backpack? W = Fd = m g Δx= 7.5kg(9.8m/s2)(8.2m) b.How much power does the climber expend in this effort? P = W = 603 J = t 5/22/2017 0.34 watt 1800 s Norah Ali Al Moneef king Saud university 49 Example : A 200 kg curtain needs to be raised 8m. in as close to 5 s as possible. You need to decide among three motors to buy for this, each motor cost a little more the bigger the power rating. The power rating for the three motors are listed as 1.0 kw, 3.5 kw and 5.5 kw. Which motor is the best for the job? • Given: m = 200 kg Δx = 8 m ∆t = 5s • Unknown: Power and work W = F·Δx W = m·g·h W = (200 kg)·(9.81 m/s²)·(8 m) = 15,696 Joules P = W/∆t P = 15,696 J / 5 s= 3,139 watts 5/22/2017 Norah Ali Al Moneef king Saud university 50 example Calculate the power of a car that maintains a constant speed of 30 ms-1 against air resistance forces of 2 kN As the car is travelling at a constant speed the car’s engine must be exerting a force equal to the opposing air resistance forces. P=Fv = 2 kN x 30 ms-1 = 2 000 N x 30 ms-1 power = 60 kW 5/22/2017 Norah Ali Al Moneef king Saud university 51 example What power is consumed in lifting a 70-kg robber 1.6 m in 0.50 s? example A 100-kg cheetah moves from rest to 30 m/s in 4 s. What is the power? the work is equal to the change in kinetic energy: 5/22/2017 Norah Ali Al Moneef king Saud university 52 Summary • If the force is constant and parallel to the displacement, work is force times distance • If the force is not parallel to the displacement, • The total work is the work done by the net force: • SI unit of work: the joule, J • Total work is equal to the change in kinetic energy: where • Power is the rate at which work is done: • SI unit of power: the watt, WAli Al Moneef Norah 5/22/2017 king Saud university 53