Download Halliday-ch14

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Lift (force) wikipedia , lookup

Flow measurement wikipedia , lookup

Airy wave theory wikipedia , lookup

Coandă effect wikipedia , lookup

Magnetohydrodynamics wikipedia , lookup

Computational fluid dynamics wikipedia , lookup

Navier–Stokes equations wikipedia , lookup

Aerodynamics wikipedia , lookup

Reynolds number wikipedia , lookup

Pressure wikipedia , lookup

Hydraulic machinery wikipedia , lookup

Rheology wikipedia , lookup

Turbulence wikipedia , lookup

Derivation of the Navier–Stokes equations wikipedia , lookup

Fluid thread breakup wikipedia , lookup

Bernoulli's principle wikipedia , lookup

Fluid dynamics wikipedia , lookup

Transcript
Chapter 14
Fluids
14.2 What is a Fluid?
•A fluid, in contrast to a solid, is a substance that can
flow.
•Fluids conform to the boundaries of any container in
which we put them. They do so because a fluid cannot
sustain a force that is tangential to its surface. That is, a
fluid is a substance that flows because it cannot
withstand a shearing stress.
•It can, however, exert a force in the direction
perpendicular to its surface.)
14.3 Density and Pressure
To find the density r of a fluid at any point, we isolate a small volume
element V around that point and measure the mass m of the fluid contained
within that element. If the fluid has uniform density, then
Density is a scalar property; its SI unit is the kilogram per cubic meter.
If the normal force exerted over a flat area A is uniform over that area, then
the pressure is defined as:
The SI unit of pressure is the newton per square meter, which is given a
special name, the pascal (Pa).
1 atmosphere (atm) = 1.01x105 Pa =760 torr =14.7 lb/in.2.
14.3 Density and Pressure
14.3 Density and Pressure
Example, Atmospheric Pressure and Force
14.4: Fluids at Rest
The pressure at a point in a fluid in static equilibrium
depends on the depth of that point but not on any
horizontal dimension of the fluid or its container.
The balance of the 3 forces is written as:
If p1 and p2 are the pressures on the top and the bottom
surfaces of the sample,
Fig. 14-2 Above: A tank of
water in which a sample of
water is contained in an
imaginary cylinder of
horizontal base area A.
Below: A free-body diagram of
the water sample.
Since the mass m of the water in the cylinder is, m =rV,
where the cylinder’s volume V is the product of its face
area A and its height (y1 -y2), then m =rA(y1-y2).
Therefore,
If y1 is at the surface and y2 is at a depth h below the
surface, then
(where po is the pressure at the surface, and p the pressure
at depth h).
Example:
Example:
14.5: Measuring Pressure: The Mercury Barometer
A mercury barometer is a device
used to measure the pressure of the
atmosphere. The long glass tube is
filled with mercury and the space
above the mercury column
contains only mercury vapor,
whose pressure can be neglected.
If the atmospheric pressure is p0 ,
and r is the density of mercury,
Fig. 14-5 (a) A mercury barometer. (b) Another
mercury barometer. The distance h is the
same in both cases.
14.5: Measuring Pressure: The Open-Tube Manometer
An open-tube manometer measures the gauge
pressure pg of a gas. It consists of a U-tube
containing a liquid, with one end of the tube
connected to the vessel whose gauge pressure
we wish to measure and the other end open to
the atmosphere.
If po is the atmospheric pressure, p is the
pressure at level 2 as shown, and r is the
density of the liquid in the tube, then
14.6: Pascal’s Principle
A change in the pressure applied to an enclosed incompressible fluid is transmitted
undiminished to every portion of the fluid and to the walls of its container.
14.6: Pascal’s Principle and the Hydraulic Lever
The force Fi is applied on the left and the
downward force Fo from the load on the
right produce a change Dp in the pressure of
the liquid that is given by
If we move the input piston downward a
distance di, the output piston moves
upward a distance do, such that the same
volume V of the incompressible liquid is
displaced at both pistons.
Then the output work is:
14.7: Archimedes Principle
When a body is fully or partially submerged in a fluid, a buoyant force from the
surrounding fluid acts on the body. The force is directed upward and has a
magnitude equal to the weight of the fluid that has been displaced by the body.
The net upward force on the object is the
buoyant force, Fb.
The buoyant force on a body in a fluid has
the magnitude
Fb = mf g (buoyant force),
Fig. 14-9 A thin-walled plastic sack of water
is in static equilibrium in the pool. The
gravitational force on the sack must be
balanced by a net upward force on it from the
surrounding water.
where mf is the mass of the fluid that is
displaced by the body.
14.7: Archimedes Principle: Floating and Apparent Weight
When a body floats in a fluid, the magnitude Fb of the buoyant
force on the body is equal to the magnitude Fg of the gravitational
force on the body.
That means, when a body floats in a fluid, the magnitude Fg of the
gravitational force on the body is equal to the weight mfg of the
fluid that has been displaced by the body, where mf is the mass of
the fluid displaced.
That is, a floating body displaces its own weight of fluid.
The apparent weight of an object in a fluid is less than the actual weight
of the object in vacuum, and is equal to the difference between the
actual weight of a body and the buoyant force on the body.
Example, Floating, buoyancy, and density
14.8: Ideal Fluids in Motion
1.
Steady flow: In steady (or laminar) flow, the velocity of the moving fluid at any
fixed point does not change with time.
2.
Incompressible flow: We assume, as for fluids at rest, that our ideal fluid is
incompressible; that is, its density has a constant, uniform value.
3.
Nonviscous flow: The viscosity of a fluid is a measure of how resistive the fluid is
to flow; viscosity is the fluid analog of friction between solids. An object moving
through a nonviscous fluid would experience no viscous drag force—that is, no
resistive force due to viscosity; it could move at constant speed through the fluid.
4.
Irrotational flow: In irrotational flow a test body suspended in the fluid will not
rotate about an axis through its own center of mass.
14.9: The Equation of Continuity
14.10: Bernoulli’s Equation
Fig. 14-19 Fluid flows at a steady rate through a length L
of a tube, from the input end at the left to the output end at
the right. From time t in (a) to time t+Dt in (b), the amount
of fluid shown in purple enters the input end and the equal
amount shown in green emerges from the output end.
If the speed of a fluid element increases as the
element travels along a horizontal streamline, the
pressure of the fluid must decrease, and conversely.
14.10: Bernoulli’s Equation: Proof
The change in kinetic energy of the system is the work
done on the system.
If the density of the fluid is r,
The work done by gravitational forces is:
The net work done by the fluid is:
Therefore,
Finally,
Example-2: Bernoulli’s Principle
Chapter 14. Problem 38.
A small solid ball is released from rest while fully submerged
in a liquid and then its kinetic energy is measured when it has
moved 4.0 cm in the liquid. Figure gives the results after
many liquids are used: The kinetic energy K is plotted versus
the liquid density ρliq, and Ks = 1.60 J sets the scale on the
vertical axis. What are (a) the density and (b) the volume of
the ball?
Chapter 14. Problem 42.
A flotation device is in the shape of a right cylinder, with a
height of 0.50 m and a face area of 4.00 m2 on top and
bottom, and its density is 0.40 times that of fresh water. It is
initially held fully submerged in fresh water, with its top face
at the water surface. Then it is allowed to ascend gradually
until it begins to float. How much work does the buoyant
force do on the device during the ascent?