Download F RTA155E

FORTA 155E
New Generation Fiber Optical Modem
A Compact
and Cost-effective
Optical Transport System
www.zyflex.com.tw
ZyFLEX
FORTA 155E
FOM
ZyFLEX
FORTA 155E
Fiber Optic Multiplexer
General Description
Feature List
◇ Scaleable capacity :supports 4, 8, 12, and 16
T1/E1 channels
◇ N*64 Kbps with one or four V.35 Interfaces
◇ 10/100 Ethernet interface with wire-line throughput
◇ Network Management through embedded SNMP protocol
◇ Integrated Alarm input and output contacts
◇ Built-in local craft interface and order-wire
◇ Built-in LCD and Keypad for easy access
◇ Local and remote performance monitoring
◇ Auto Laser Shutdown (ALS) for personnel
protection from hazardous laser radiation
◇ Redundant fibers to support 1+1 protection with
sub 50ms switching capability
◇ Alarm/Error detection and Report
Brief Specification
Dimension
(W x D x H)
Weight
439 mm x 320mm x 44mm
Temperature
Humidity
Power Input
4 kg ± 200 g
Operation - 0°~ 60° C /
Storage - 10°~ 80° C
100% relative humidity at 30°C
(non condensing)
-48V DC / AC 100 ~ 260 VAC
Consumption 15 watts @ 25 ℃
Protocol
SNMP V2C
Self
Diagnostic
Memory diagnostic
Various Loopback capabilities
• Standard SDH STM-1 Transmission
FORTA 155E is a stand-alone Fiber Optical Multiplexer (FOM) based
on ITU-T G.707 STM-1rate (155M), which all the bandwidth will be
fully utilized by our design!
• Single Fiber (WDM) Transmission
With WDM technologies, FORTA 155E provide the capability of single
fiber transmission.
• 100M Full Rate Ethernet
With the 155M bandwidth provided by STM-1, FORTA 155E’s
Ethernet interface allows service providers to provide 100M Full Rate
Ethernet IP service!
• Versatile Interfaces
It provides transportation of 4/8/12/16 lines of T1/E1 tributary
interfaces, single or Quad V.35 (Nx64Kbps) leased line interfaces, or
wire-line throughput Ethernet interface through the fiber link.
• Engineering Order Wire (EOW) Available
Order wore make the maintenance easy & convenient!
• Flexible Applications
FORTA 155E adopts the FTTB (fiber to the building) and FTTC (fiberto-the-curb) optical network architecture. Together with other
telecommunication devices that include E1/T1 interfaces, such as the
E1 Multiplexer, DLC, Fractional E1/T1, and PABX, FORTA 155E can
provide connections to various user sites, such as commercial towers,
residential buildings, remote towns, mobile phone base stations,
hospitals, and schools.
• Modular Design
Modular design allows providers to invest at their own pace. It also
allows providers to increase modules, or upgrade software at their
own pace, according to their individual planning schedules and
customer requirements. The 100M Full rate Ethernet capacity will
enable existing TDM networks to seamlessly migrate to a Next
Generation IP Network.
• Solid Management
Built-in SNMP Agent includes Ethernet interfaces, which connect to
the SNMP Network Management System. User-friendly graphical
interfaces (GUI) offer a comprehensive range of OAM & P functions
such as configuration, maintenance, fault management, performance
monitoring, and security management.
Application
Ethernet
Ethernet
FORTA 155E
Microwave
Base Station
FORTA 155E
Mobile Phone Switch
Cell Phone
Base Station
PSTN Switch
Order Wire
PBX
Order Wire
RS-232/RJ-45
Management
DLC
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
FORTA 155E
FOI
ZyFLEX
Fiber Optical Interface Module (FC connector type)
Standard SDH STM-1 Transmission
General Description
The FOI provides a STM-1 (155.52 Mbps) interface. In order to
maintain transportation stability, FOI also provides 1+1 protection
switching, and a SCNP protection mechanism which meets ITU-T.G.841
standards. In addition, FOI can support the manual set-up switch mode.
Based on performance monitoring, a protection switch threshold can be
set up, to indicate major alarms when the protection switch occurs.
Through the FOI Module, message and system information from the
remote terminal will be sent back to the local terminal. Users can use
RS-232 interface to connect to the CIT (Craft Interface Terminal), to
control the remote terminal or retrieve the system status and remote
alarms. It also connects to the network management system via
Ethernet, to provide a Graphical User Interface. The operation team can
set up all kinds of operation parameters, warning and operation controls,
and the monitoring of transport functions.
Feature List
Brief Specification
◇ Front panel LEDs indicate errors, alarms, and
network connection status.
◇ STM-1 Optic Modules conform to ITU-T G.957
standards.
◇ Timing recovery circuit with ultra-low jitter.
◇ Plug-in and monitoring of STM-1 Overhead Bit.
◇ Alarm and fault monitoring and reporting.
◇ Clock synchronization for Main Power Modules.
◇ Use of non-volatile memory devices for efficient data
storage.
FOI
Interface Speed
155.52 Mbps ± 20ppm
Line Code
Binary non-return-to-zero (NRZ) after scrambling
Frame Format
ITU-T G.707
Connector
Dual FC
Transmission
Application Code
ITU-T G.957 S-1.1
(L-1.1 or others are available)
Fiber Optical Interface Module (SC connector type)
Standard SDH STM-1 Transmission
General Description
The FOI provides a STM-1 (155.52 Mbps) interface. In order to
maintain transportation stability, FOI also provides 1+1 protection
switching, and a SCNP protection mechanism which meets ITU-T.G.841
standards. In addition, FOI can support the manual set-up switch mode.
Based on performance monitoring, a protection switch threshold can be
set up, to indicate major alarms when the protection switch occurs.
Through the FOI Module, message and system information from the
remote terminal will be sent back to the local terminal. Users can use
RS-232 interface to connect to the CIT (Craft Interface Terminal), to
control the remote terminal or retrieve the system status and remote
alarms. It also connects to the network management system via
Ethernet, to provide a Graphical User Interface. The operation team can
set up all kinds of operation parameters, warning and operation controls,
and the monitoring of transport functions.
Feature List
◇ Front panel LEDs indicate errors, alarms, and
network connection status.
◇ STM-1 Optic Modules conform to ITU-T G.957
standards.
◇ Timing recovery circuit with ultra-low jitter.
◇ Plug-in and monitoring of STM-1 Overhead Bit.
◇ Alarm and fault monitoring and reporting.
◇ Clock synchronization for Main Power Modules.
◇ Use of non-volatile memory devices for efficient data
storage.
Brief Specification
Interface Speed
155.52 Mbps ± 20ppm
Line Code
Binary non-return-to-zero (NRZ) after scrambling
Frame Format
ITU-T G.707
Connector
Dual SC
Transmission
Application Code
ITU-T G.957 S-1.1
(L-1.1 or others are available)
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
FORTA 155E
FOI
ZyFLEX
Fiber Optical Interface Module (WDM type)
Standard SDH STM-1 Transmission
General Description
The kind of FOI provides a WDM STM-1 (155.52 Mbps) interface. In
order to maintain transportation stability, FOI also provides 1+1
protection switching, and a SCNP protection mechanism which meets
ITU-T.G.841 standards. In addition, FOI can support the manual set-up
switch mode. Based on performance monitoring, a protection switch
threshold can be set up, to indicate major alarms when the protection
switch occurs.
Through the FOI Module, message and system information from the
remote terminal will be sent back to the local terminal. Users can use
RS-232 interface to connect to the CIT (Craft Interface Terminal), to
control the remote terminal or retrieve the system status and remote
alarms. It also connects to the network management system via
Ethernet, to provide a Graphical User Interface. The operation team can
set up all kinds of operation parameters, warning and operation controls,
and the monitoring of transport functions.
Feature List
Brief Specification
◇ Front panel LEDs indicate errors, alarms, and
network connection status.
◇ WDM technologies to save fiber requirement.
◇ Timing recovery circuit with ultra-low jitter.
◇ Plug-in and monitoring of STM-1 Overhead Bit.
◇ Alarm and fault monitoring and reporting.
◇ Clock synchronization for Main Power Modules.
◇ Use of non-volatile memory devices for efficient data
storage.
ETH
Interface Speed
155.52 Mbps ± 20ppm
Line Code
Binary non-return-to-zero (NRZ) after scrambling
Frame Format
ITU-T G.707
Connector
Single FC
Transmission
Application Code
ITU-T G.957 L-1.1
(others are available upon request)
10/100 Ethernet Module
Ethernet over SDH Functions
General Description
The ETH Module provides Ethernet over SDH functions that conform to
ITU-T G.7041 Generic Framing Procedure (GFP), and ITU-T X.86 Link
Access Procedure- SDH(LAPS). It also supports the IEEE 802.3 10 /100
Ethernet network interface. ETH provides auto-sensing 10/100 Mbps
switching capabilities for efficient connectivity to servers, workstations
and others attached devices. Plug-and-Play usability, outstanding priceto-performance ratio, and flexible designs make the ETH simple and
affordable solutions for a wide range of applications.
The IEEE 802.3x standard-based flow control allows ETH to prevent
traffic congestion by informing attached devices to stop transmission.
When the ETH detect that the buffer of each port is nearly full, attached
devices are requested to wait until new data can be accepted. Flow
control allows 100 Mbps full duplex connections between servers and
ETH with minimum data transfer loss.
Feature List
◇ Enable the IP traffic tunnel through the existing SDH
network
◇ Realize the “Ethernet all the way” network infrastructure
◇ Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
◇ Half-duplex mode for backpressure, and Full-duplex for
flow control
◇ Reduce the cost of operating and maintenance with
high performance SNMP management
Brief Specification
Ports
One uers port per card
Protocol
CSMA/CD
Data buffer
2 Mb/s
Bandwidth
64 Kbps ~ 100 Mbps by 64 kbps increments
Throughput
148,800pps using 64byte packets
Packet Size
Up to 1536bytes
Mapping Format
GFP or X.86
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
FORTA 155E
QET
ZyFLEX
Quad E1/T1 Tributary Module (DB25 Connector type)
Four Lines of E1/T1 Modules
General Description
FORTA 155E’s QET (Quad E1/T1) tributary module offer two tributary
interfaces, T1 or E1 interfaces, which comply to 2,048 Kbit/s or 1,544
Kbit/s interface standards from ITU-T G.703/G.704/G.706.
QET ‘s Monitoring functions include collecting data and generating near
end and far end efficiency parameters such as Error Second (ES),
Severely Error Second (SES), and Unavailable Second (UAS). This
information includes current and the most recent 96 bits of 15-minute
historical data for CV, ES, SES and UAS.
QET modules support hot-swappable functions. Adding or changing
modules during transmission will not affect ongoing services of T1/E1
modules. When modules are changed, or after power recovery, the
system will automatically upload the settings of the previous module, so
that no re-setup is necessary. Module Service signal LED (MODE), and
E1/T1 signal lights are located on FORTA 155E’s front panel.
Feature List
Brief Specification
◇ Quad E1/T1 links per Module
◇ Supports AMI or HDB3 Line Coding for E1
◇ Supports AMI or B8ZS Line Coding for T1
◇ O.151 on board PRBS testing
◇ LED signals indicate Module status
◇ Supports grooming for Nx64 Kbps
◇ Input Jitter Tolerance complies with ITU-T G.823
◇ Includes Lightening Protection circuits
◇ Alarm/Error detection and reporting
E1 Interface
QET
Data Rate
2048 Kbit/s ± 50 ppm
Line Coding
ITU-T G.703 AMI or HDB3
Standards
ITU-T G.703, G.704, G.706, G.823
Impedance
120Ω / 75Ω
T1 Interface
Data Rate
1544 Kbit/s ± 50 ppm
Line Coding
AMI and B8ZS
Standards
ITU-T G.703, G.704, G.824
Impedance
100Ω
Quad E1/T1 Tributary Module (Quad RJ45 Connector type)
Four Lines of E1/T1 Modules
General Description
FORTA155E’s QET (Quad E1/T1) tributary module offer two tributary
interfaces, T1 or E1 interfaces, which comply to 2,048 Kbit/s or 1,544
Kbit/s interface standards from ITU-T G.703/G.704/G.706.
QET ‘s Monitoring functions include collecting data and generating near
end and far end efficiency parameters such as Error Second (ES),
Severely Error Second (SES), and Unavailable Second (UAS). This
information includes current and the most recent 96 bits of 15-minute
historical data for CV, ES, SES and UAS.
QET modules support hot-swappable functions. Adding or changing
modules during transmission will not affect ongoing services of T1/E1
modules. When modules are changed, or after power recovery, the
system will automatically upload the settings of the previous module, so
that no re-setup is necessary. Module Service signal LED (MODE), and
E1/T1 signal lights are located on FORTA 155E’s front panel.
Feature List
◇ Quad E1/T1 links per Module
◇ Supports AMI or HDB3 Line Coding for E1
◇ Supports AMI or B8ZS Line Coding for T1
◇ O.151 on board PRBS testing
◇ LED signals indicate Module status
◇ Supports grooming for Nx64 Kbps
◇ Input Jitter Tolerance complies with ITU-T G.823
◇ Includes Lightening Protection circuits
◇ Alarm/Error detection and reporting
Brief Specification
E1 Interface
Data Rate
2048 Kbit/s ± 50 ppm
Line Coding
ITU-T G.703 AMI or HDB3
Standards
ITU-T G.703, G.704, G.706, G.823
Impedance
120Ω / 75Ω
T1 Interface
Data Rate
1544 Kbit/s ± 50 ppm
Line Coding
AMI and B8ZS
Standards
ITU-T G.703, G.704, G.824
Impedance
100Ω
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
FORTA 155E
QE1
ZyFLEX
Quad E1 Tributary Module (BNC Connector type)
Four Lines of E1 Modules
General Description
FORTA 155E’s QE1 (Quad E1) tributary module offer four E1 interfaces,
which comply to 2,048 Kbit/s interface standards from ITU-T
G.703/G.704/G.706.
QE1 ‘s Monitoring functions include collecting data and generating near
end and far end efficiency parameters such as Error Second (ES),
Severely Error Second (SES), and Unavailable Second (UAS). This
information includes current and the most recent 96 bits of 15-minute
historical data for CV, ES, SES and UAS.
QE1 modules support hot-swappable functions. Adding or changing
modules during transmission will not affect ongoing services of E1
modules. When modules are changed, or after power recovery, the
system will automatically upload the settings of the previous module, so
that no re-setup is necessary. LED showing the line status and alarms
are located on FORTA 155E’s front panel.
Feature List
Brief Specification
◇ Quad E1 links per Module
◇ Supports AMI or HDB3 Line Coding for E1
◇ O.151 on board PRBS testing
◇ LED signals indicate Module status
◇ Supports grooming for Nx64 Kbps
◇ Input Jitter Tolerance complies with ITU-T G.823
◇ Includes Lightening Protection circuits
◇ Alarm/Error detection and reporting
E1 Interface
QV35
Data Rate
2048 Kbit/s ± 50 ppm
Line Coding
ITU-T G.703 AMI or HDB3
Standards
ITU-T G.703, G.704, G.706, G.823
Impedance
75Ω
Quad V35 Module
Nx64 Digital Transmission Interface
General Description
The QV35 module supports four Nx64(N=1~32) data leased line services.
The data rate provided by NX64 module can be selectable from 64Kbps to
2.048Mbps in 64k increments.
User can select the desired application from the CIT or NMS interface
easily. This data service line card through the optical link can allow service
provider to give their customer the leased line service at those service
area far away from the central office.
Various diagnostic loop back tests are also provided in QV35 and allow
craft-person to trouble shoot the field problem.
FORTA 155E also works as the SNMP agent and connects with the
counterpart of a SNMP manager with a user-friendly Graphical User
Interface (GUI). It provides a carrier-class management system for massmarket deployment.
Feature List
◇ Composite Port speeds - 64k up to 2.048Mbps in 64k
increments
◇ Four V.35 Interfaces
◇ Complies with ITU-T V.35
◇ O.151 on board PRBS testing
◇ LED signals indicate Module status
◇ Alarm/Error detection and reporting
Brief Specification
Port density
Electrical
Characteristics
Payload Rate
4 ports
Complies with ITU-T V.35
System Timing
External/Internal/Line
Test and
Diagnostics
Self-test Capability
Near end Loopback (NLB)
Local Loopback
Remote Loopback (RLB)
Remote Payload Loopback
Nx64kbit/s (1≦N ≦ 32)
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
FORTA 155E
V35
ZyFLEX
V35 Module
Nx64 Digital Transmission Interface
General Description
The V35 module supports four Nx64(N=1~32) data leased line services.
The data rate provided by NX64 module can be selectable from 64Kbps to
2.048Mbps in 64k increments.
User can select the desired application from the CIT or NMS interface
easily. This data service line card through the optical link can allow service
provider to give their customer the leased line service at those service
area far away from the central office.
Various diagnostic loop back tests are also provided in V35 and allow
craft-person to trouble shoot the field problem.
FORTA 155E also works as the SNMP agent and connects with the
counterpart of a SNMP manager with a user-friendly Graphical User
Interface (GUI). It provides a carrier-class management system for massmarket deployment.
Feature List
Brief Specification
◇ Composite Port speeds - 64k up to 2.048Mbps in 64k
increments
◇ Single V.35 Interface
◇ Complies with ITU-T V.35
◇ O.151 on board PRBS testing
◇ LED signals indicate Module status
◇ Alarm/Error detection and reporting
Port density
Electrical
Characteristics
Payload Rate
1 port with M34 Female
Complies with ITU-T V.35
System Timing
External/Internal/Line
Test and
Diagnostics
Self-test Capability
Near end Loopback (NLB)
Local Loopback
Remote Loopback (RLB)
Remote Payload Loopback
Nx64kbit/s (1≦N ≦ 32)
Adapters and Cable Assembly
Various adapters and cable assembly are available
DB 25 to BNC (75 Ω )
for QET module
DB 25 to wire-wrap (120 Ω )
for QET module
HD 68 to M34
for QV35 module
DB 9 to wire-wrap
for alarm output/input
Both Clock input/output (ITU-T G.703 2.048MHz interface) and order-wire interface are optional for FORTA 155E.
Please contact sales of ZyFLEX for detail.
Copyright © ZyFLEX Tech. Incorporation. All rights reserved. All specifications are subject to change without notice.
www.ZyFLEX.com.tw
FORTA 155E
FORTA 155E
Address
FORTA 155E
FORTA 155E
： 4F, No.5-2, Industry East Rd. 9,
Science-Based Industrial Park, Hsinchu, Taiwan
R.O.C.
WEB site
： http://www.zyflex.com.tw
PHONE
： +886-3-5679168
FAX
： +886-3-5679188
Email
： [email protected] (Sales)
[email protected] (Technical Support)
Support
Hotline
： +886-932-876-042
On-line
Support
： MSN: [email protected] ; [email protected]
+886-972-022-326
SKYPE: zyflexsupport ; fae_zyflex