Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
GFI Product Manual Installation and Setup Guide The information and content in this document is provided for informational purposes only and is provided "as is" with no warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, and non-infringement. GFI Software is not liable for any damages, including any consequential damages, of any kind that may result from the use of this document. The information is obtained from publicly available sources. Though reasonable effort has been made to ensure the accuracy of the data provided, GFI makes no claim, promise or guarantee about the completeness, accuracy, recency or adequacy of information and is not responsible for misprints, out-of-date information, or errors. GFI makes no warranty, express or implied, and assumes no legal liability or responsibility for the accuracy or completeness of any information contained in this document. If you believe there are any factual errors in this document, please contact us and we will review your concerns as soon as practical. All product and company names herein may be trademarks of their respective owners. GFI LanGuard is copyright of GFI SOFTWARE Ltd. - 1999-2012 GFI Software Ltd. All rights reserved. Document Version: 11.1 Last updated (month/day/year): 04/04/2013 Contents 1 Introduction 1.1 About this guide 1.1.1 Terms and conventions used in this manual 1.2 How GFI LanGuard works 1.3 How GFI LanGuard Agents work 1.4 How GFI LanGuard Relay Agents work 1.5 GFI LanGuard Components 2 Installing GFI LanGuard 2.1 Deployment scenarios 2.1.1 Deploying GFI LanGuard in mixed mode 2.1.2 Deploying GFI LanGuard using Relay Agents 2.1.3 Deploying GFI LanGuard in Agent-less mode 2.2 System requirements 2.2.1 Hardware requirements 2.2.2 Software requirements 2.2.3 Firewall Ports and Protocols 2.2.4 Gateway permissions 2.2.5 Supported antivirus/anti-spyware applications 2.3 Upgrading from previous versions 2.4 New installation 2.5 Post install actions 7 7 7 8 8 9 9 10 10 10 11 12 14 14 15 16 17 18 18 20 23 3 Testing the installation 25 4 The GFI LanGuard Dashboard 27 4.1 Achieving results from the dashboard 4.2 Using the Dashboard 4.3 Using the Computer Tree 4.3.1 Simple filtering 4.3.2 Advanced filtering 4.3.3 Grouping 4.3.4 Searching 4.4 Using Attributes 4.4.1 Assigning attributes to a computer 4.4.2 Assigning attributes to a group 4.4.3 Configuring attributes 4.5 Dashboard actions 4.6 Exporting issue list 4.7 Dashboard views 4.7.1 Overview 4.7.2 Computers view 4.7.3 History view 4.7.4 Vulnerabilities View 4.7.5 Patches View 4.7.6 Ports View 27 27 28 28 29 30 30 31 31 32 33 34 34 35 35 38 40 41 42 43 4.7.7 Software View 4.7.8 Hardware View 4.7.9 System Information View 5 Troubleshooting and support 5.1 Resolving common issues 5.2 Using the Troubleshooter Wizard 5.3 GFI SkyNet 5.4 Web Forum 5.5 Requesting technical support 44 45 46 47 47 49 51 51 51 6 Glossary 53 7 Index 61 List of Figures Screenshot 1: Pre–requisite check dialog 19 Screenshot 2: Import and Export settings from a previous instance 20 Screenshot 3: End-user license agreement 21 Screenshot 4: Specify user details and license key 21 Screenshot 5: Attendant service credentials 22 Screenshot 6: Import and Export configurations 23 Screenshot 7: Launch a scan 25 Screenshot 8: Launch a scan properties 25 Screenshot 9: Scan results summary 26 Screenshot 10: View Dashboard 28 Screenshot 11: Simple filtering 29 Screenshot 12: Add Filter Properties 29 Screenshot 13: Search specific computers and groups 30 Screenshot 14: Assigning attributes: Single computer 32 Screenshot 15: Assigning attributes: Multiple computers 33 Screenshot 16: New attribute dialog 33 Screenshot 17: Actions section in the Dashboard 34 Screenshot 18: Dashboard Overview 35 Screenshot 19: Analyze results by computer 38 Screenshot 20: History view in the Dashboard 40 Screenshot 21: Vulnerabilities view in the Dashboard 41 Screenshot 22: Patches view in Dashboard 42 Screenshot 23: Ports view in Dashboard 43 Screenshot 24: Software view in Dashboard 44 Screenshot 25: Hardware view in Dashboard 45 Screenshot 26: System Information view in Dashboard 46 Screenshot 27: Troubleshooter wizard – Information details 50 Screenshot 28: Troubleshooter wizard – Gathering information about known issues 51 List of Tables Table 1: Terms and conventions used in this manual 7 Table 2: GFI LanGuard Components 9 Table 3: Hardware requirements - GFI LanGuard Server 14 Table 4: Hardware requirements - GFI LanGuard Agent 14 Table 5: Hardware requirements - GFI LanGuard Relay Agent 15 Table 6: Supported Operating Systems 15 Table 7: Supported database backends 16 Table 8: Software requirements - Additional components 16 Table 9: Ports and Protocols 17 Table 10: Import override options 24 Table 11: Search options 31 Table 12: Dashboard actions 34 Table 13: Software information from an audit 36 Table 14: View by computers information 38 Table 15: GFI LanGuard common Issues 47 Table 16: Information gathering options 50 1 Introduction GFI LanGuard is a patch management and network auditing solution that enables you to easily manage and maintain end-point protection across devices within your LAN. It acts as a virtual security consultant that offers Patch Management, Vulnerability Assessment and Network Auditing support for Windows®and MAC computers. GFI LanGuard achieves LAN protection through: Identification of system and network weaknesses via a comprehensive vulnerability checks database. This includes tests based on OVAL, CVE and SANS Top 20 vulnerability assessment guidelines Auditing of all hardware and software assets on your network, enabling you to create a detailed inventory of assets. This goes as far as enumerating installed applications as well as devices connected on your network Automatic download and remote installation of service packs and patches for Microsoft® Windows and MAC operating systems as well as third party products Automatic un–installation of unauthorized software. Topics in this chapter: 1.1 About this guide 7 1.2 How GFI LanGuard works 8 1.3 How GFI LanGuard Agents work 8 1.4 How GFI LanGuard Relay Agents work 9 1.5 GFI LanGuard Components 9 1.1 About this guide The aim of this Installation and Setup Guide is to help System Administrators install and test GFI LanGuard with minimum effort. 1.1.1 Terms and conventions used in this manual Table 1: Terms and conventions used in this manual Term Description Additional information and references essential for the operation of GFI LanGuard. Important notifications and cautions regarding potential issues that are commonly encountered. > Step by step navigational instructions to access a specific function. Bold text Items to select such as nodes, menu options or command buttons. Italics text Parameters and values that you must replace with the applicable value, such as custom paths and file names. Code Indicates text values to key in, such as commands and addresses. GFI LanGuard 1 Introduction | 7 1.2 How GFI LanGuard works Figure 1: How GFI LanGuard works Upon installation, GFI LanGuard operates in two stages: First it determines the machines that are reachable. It also tries to collect information sets from the target machines as part of its Network Discovery operations, using a subset of SMB, NETBIOS, and ICMP protocols. Supported targets include the localhost, IP, computer name, computers list, IP range, whole domain/workgroup and/or organizational unit. Second, once the targets are identified, GFI LanGuard performs a deep scan to enumerate all the information related to the target computer. GFI LanGuard uses a variety of techniques to gain access to this information ranging from file and folder property checks, registry checks, WMI commands, SMB commands as well as port scan checks (TCP/UDP) and more. 1.3 How GFI LanGuard Agents work GFI LanGuard can be configured to automatically discover and deploy agents on new computers. Agents minimize network bandwidth utilization. This is because in Agent-less mode, the GFI LanGuard server component performs audits over the network; while in Agent mode, audits are done using the scan target's resources and only a result XML file is transferred over the network. Agents send scan data to GFI LanGuard through TCP port 1070. This port is opened by default when installing GFI LanGuard. Agents do not consume resources of the scan target's machine unless it is performing a scan or remediation operations. If an Agent becomes unresponsive for 60 days, it is automatically uninstalled from the target machine. GFI LanGuard 1 Introduction | 8 Note By default, Agents auto-uninstall after 60 days. To customize the timeframe, go to Configuration tab > Agents Management and from the right pane, click Agents Settings. Specify the number of days in the General tab of the Agents Settings dialog. Note Agents can only be installed on computers running a Microsoft Windows operating system and they require approximately 25 MB of memory and 350 MB of hard disc space. 1.4 How GFI LanGuard Relay Agents work GFI LanGuard enables you to configure any machine with a GFI LanGuard Agent installed on it, to act as a GFI LanGuard server. These Agents are called Relay Agents. Relay Agents reduce the load from the GFI LanGuard server component. Computers configured as relay agents download patches and definitions directly from the GFI LanGuard server and forward them to client computers just as if it were the server component. 1.5 GFI LanGuard Components This section provides you with information about components that are installed by default, when you install GFI LanGuard. Once you install the product, you can manage patch management and remediation tasks from the Management Console. The Management Console is also referred to as the Server component of GFI LanGuard, as described in the table below: Table 2: GFI LanGuard Components Component Description GFI LanGuard Server Also knows as the Management Console. Enables you to manage agents, perform scans, analyze results, remediate vulnerability issues and generate reports. GFI LanGuard Agents Enable data processing and auditing on target machines; once an audit is finished, result is sent to GFI LanGuard. GFI LanGuard Update System Enables you to configure GFI LanGuard to auto–download updates released by GFI to improve functionality. These updates also include checking GFI web site for newer builds. GFI LanGuard Attendant Service The background service that manages all scheduled operations, including scheduled network security scans, patch deployment and remediation operations. GFI LanGuard Scanning Profiles Editor This editor enables you to create new and modify existing scanning profiles. GFI LanGuard Command Line Tools Enables you to launch network vulnerability scans and patch deployment sessions as well as importing and exporting profiles and vulnerabilities without loading up the GFI LanGuard management console. GFI LanGuard 1 Introduction | 9 2 Installing GFI LanGuard This chapter guides you in selecting the most appropriate deployment solution that caters to your requirements as well as provides you with information about how to successfully deploy a fully functional instance of GFI LanGuard. Topics in this chapter: 2.1 Deployment scenarios 10 2.2 System requirements 14 2.3 Upgrading from previous versions 18 2.4 New installation 20 2.5 Post install actions 23 2.1 Deployment scenarios GFI LanGuard can be installed on any machine which meets the minimum system requirements. Use the information in this section to determine whether you want to monitor a pool of Agent-less, Agentbased or a mix of both, depending on the: Number of computers and devices you want to monitor Traffic load on your network during normal operation time. The following sections provide you with information about different deployment scenarios supported by GFI LanGuard: Deploying GFI LanGuard in mixed mode Deploying GFI LanGuard using Relay Agents Deploying GFI LanGuard in Agent-less mode 2.1.1 Deploying GFI LanGuard in mixed mode GFI LanGuard can be configured to deploy agents automatically on newly discovered machines or on manually selected computers. Agents enable data processing and auditing to be done on target machines; once an audit is finished, the result is transferred to GFI LanGuard through an XML file. Agent-based scans: Have better performance because the load is distributed across client machines. Can work on low bandwidth environments because the communication between the server and agents is reduced. Are suitable for laptops. Computers will be scanned even if the computer is not connected to the company network. Are more accurate than manual scans, agents can access more information on the local host. The following screenshot shows how GFI LanGuard can be deployed using agents on a Local Area Network (LAN): GFI LanGuard 2 Installing GFI LanGuard | 10 Figure 2: Agent/Mixed Mode 2.1.2 Deploying GFI LanGuard using Relay Agents Relay agents are used to reduce the load from the GFI LanGuard server. Computers configured as relay agents will download patches and definitions directly from the GFI LanGuard server and will forward them to client computers. The main advantages of using relay agents are: Save Network Bandwidth in local or geographically distributed networks. If a relay agent is configured on each site, a patch is only downloaded once and distributed to clients Load is removed from the GFI LanGuard server component and distributed amongst relay agents Since computers are managed from multiple relay agents, it increases the number of devices that can be protected simultaneously. In a network, computers can be grouped and each group can be assigned to a relay agent as shown below. GFI LanGuard 2 Installing GFI LanGuard | 11 Figure 3: Relay Agent Mode Note For more information refer to Configuring Relay Agents from the Administrator Guide. 2.1.3 Deploying GFI LanGuard in Agent-less mode Agent-less auditing is started from the GFI LanGuard management console. GFI LanGuard creates a remote session with the specified scan targets and audits them over the network. On completion, the results are imported into the results database and the remote session ends. You can audit single computers, a range of specific computers and an entire domain/workgroup. GFI LanGuard 2 Installing GFI LanGuard | 12 Note Scans in Agent-less mode use the resources of the machine where GFI LanGuard is installed and utilize more network bandwidth since auditing is done remotely. When you have a large network of scan targets, this mode can drastically decrease GFI LanGuard's performance and affects network speed. In larger networks, deploy Agents/Relay Agents to balance the load appropriately. Figure 4: Agent-Less Mode GFI LanGuard 2 Installing GFI LanGuard | 13 2.2 System requirements Computers running GFI LanGuard Server/Agent/Relay Agent must meet the system requirements described below for performance reasons . Note If you are looking for a patch management solution for 2,000 or more computers, we recommend that you contact us for pricing, as well as suggestions regarding the proper deployment and management procedure for such a solution. Refer to the following sections for information about: Hardware requirements Software requirements Firewall ports and protocols Gateway permissions Supported antivirus/anti-spyware applications 2.2.1 Hardware requirements Ensure that the below hardware requirements are met, on computers running any of the following components: GFI LanGuard Server GFI LanGuard Agent GFI LanGuard Relay Agent GFI LanGuard Server Computers hosting GFI LanGuard Server must meet the following hardware requirements: Table 3: Hardware requirements - GFI LanGuard Server Component 1 to 100 Computers 100 to 500 Computers 500 to 3,000 Computers Processor 2 GHz Dual Core 2.8 GHz Dual Core 3 GHz Quad Core Physical Storage 5 GB 10 GB 20 GB RAM 2 GB 4 GB 8 GB Network bandwidth 1544 kbps 1544 kbps 1544 kbps GFI LanGuard Agent Computers running a GFI LanGuard Agent must meet the following hardware requirements: Table 4: Hardware requirements - GFI LanGuard Agent Component Requirement Processor 1 GHz Physical Storage 350 MB RAM 25 MB Network bandwidth 1544 kbps GFI LanGuard Relay Agent GFI LanGuard 2 Installing GFI LanGuard | 14 A computer is eligible to be configured as a Relay Agent when: The computer is online and has good uptime Has fast network access to computers connected to it Has the required disk space to allow caching. Computers configured as Relay Agents must meet the following hardware requirements: Table 5: Hardware requirements - GFI LanGuard Relay Agent Component 1 to 100 Clients 100 to 500 Clients 500 to 1,000 Clients Processor 2 GHz Dual Core 2 GHz Dual Core 2.8 GHz Dual Core Physical Storage 5 GB 10 GB 10 GB RAM 2 GB 2 GB 4 GB Network bandwidth 100 Mbps 100 Mbps 1 Gbps 2.2.2 Software requirements GFI LanGuard components can be installed on any computer that meets the software requirements listed in this section. For more information, refer to: Supported operating systems Supported databases Target computer components Other software components Supported operating systems (32-bit/64-bit) The following table lists operating systems that GFI LanGuard Server/Agent/Relay Agent can be installed on: Table 6: Supported Operating Systems Operating System GFI LanGuard GFI LanGuard Agent GFI LanGuard Relay Agent Windows ® Server 2012 Windows® Server 2008 (including R2) Standard/Enterprise Windows® Server 2003 Standard/Enterprise Windows® 8 Windows® 7 Professional/Enterprise/Ultimate Windows® Vista Business/Enterprise/Ultimate Windows® XP Professional (SP2 or higher) Windows® Small Business Server 2008 Standard Windows® Small Business Server 2003 (SP1) Windows® 2000 Professional/Server/Advanced SP4 Internet Explorer 6 SP1 or higher Windows Installer 3.1 or higher GFI LanGuard 2 Installing GFI LanGuard | 15 Supported databases GFI LanGuard uses a database to store information from network security audits and remediation operations. The database backend can be any of the following: Table 7: Supported database backends Database Microsoft Recommended Use ® Access Recommendedonly during evaluation and for up to 5 computers. MSDE/SQL Server Express® edition SQL Server® Recommended for networks containing up to 500 computers. 2000 or later Recommended for larger networks containing 500 computers or more. Target computer components The following table provides you with information about components that are required to be installed/enabled on computers to be scanned remotely by GFI LanGuard: Table 8: Software requirements - Additional components Component Description Secure Shell (SSH) Required for UNIX based scan targets. Commonly included as part of all major Unix/Linux distributions. Windows Management Instrumentation (WMI) Required to scan Windows-based scan targets. Included in all Windows 2000 or newer operating systems. File and Printer Sharing Required to enumerate and collect information about scan targets. Remote Registry Required for GFI LanGuard to run a temporary service for scanning a remote target. Additional GFI LanGuard Server components The following additional component is required on the computer where the GFI LanGuard Server component is installed: Microsoft .NET ® Framework 3.5. 2.2.3 Firewall Ports and Protocols This section provides you with information about the required firewall ports and protocols settings for: GFI LanGuard Server and Relay Agents GFI LanGuard Agent and Agent-less computers GFI LanGuard and Relay Agents Configure your firewall to allow Inbound connections on TCP port 1070, on computers running: GFI LanGuard Relay Agents This port is automatically used when GFI LanGuard is installed, and handles all inbound communication between the server component and the monitored computers. If GFI LanGuard detects that port 1070 is already in use by another application, it automatically searches for an available port in the range of 1070-1170. To manually configure the communication port: 1. Launch GFI LanGuard. 2. Click Configuration tab > Manage Agents. GFI LanGuard 2 Installing GFI LanGuard | 16 3. From the right pane, click Agents Settings. 4. From the Agents Settings dialog, specify the communication port in the TCP port text box. 5. Click OK. GFI LanGuard Agent and Agent-less computers GFI LanGuard communicates with managed computers (Agents and Agent-less), using the ports and protocols below. The firewall on managed computers needs to be configured to allow Inbound requests on ports: Table 9: Ports and Protocols TCP Ports Protocol Description 22 SSH Auditing Linux systems. 135 DCOM Dynamically assigned port. 137 NetBIOS Computer discovery and resource sharing. 138 NetBIOS Computer discovery and resource sharing. 139 NetBIOS Computer discovery and resource sharing. 161 SNMP Computer discovery. 445 SMB Used while: Auditing computers Agent management Patch deployment. 2.2.4 Gateway permissions To download definition and security updates, GFI LanGuard connects to GFI, Microsoft and ThirdParty update servers via HTTP. Ensure that the firewall settings of the machine where GFI LanGuard is installed, allows connections to: *software.gfi.com/lnsupdate/ *.download.microsoft.com *.windowsupdate.com *.update.microsoft.com All update servers of Third-Party Vendors supported by GFI LanGuard. GFI LanGuard 2 Installing GFI LanGuard | 17 Note For more information, refer to: Supported Third-Party applications: http://go.gfi.com/?pageid=LAN_PatchMng Supported application bulletins: http://go.gfi.com/?pageid=3p_fullreport Supported Microsoft applications: http://go.gfi.com/?pageid=ms_app_fullreport Supported Microsoft bulletin: http://go.gfi.com/?pageid=ms_fullreport 2.2.5 Supported antivirus/anti-spyware applications GFI LanGuard detects outdated definition files for a number of Anti–virus and Anti–spyware software. For a full list of supported Anti–virus and Anti–spyware software, refer to: http://go.gfi.com/?pageid=security_app_fullreport 2.3 Upgrading from previous versions GFI LanGuard retains all settings and result information from any previous version of GFI LanGuard. This enables you to: Install GFI LanGuard without uninstalling the previous version. Import settings to GFI LanGuard from other instances. Deploy agents on the same machines where you have a previous version of GFI LanGuard installed. Note Software upgrades from versions older than GFI LanGuard 9 cannot be performed. Note License keys of earlier versions of GFI LanGuard are not compatible and must be upgraded to run GFI LanGuard. To upgrade to a newer version: 1. Logon using administrator credentials on the machine where you wish to install GFI LanGuard. 2. Launch GFI LanGuard installation. GFI LanGuard 2 Installing GFI LanGuard | 18 Screenshot 1: Pre–requisite check dialog 3. The pre–requisite check dialog shows an overview of the status of the components required by GFI LanGuard to operate. Click Install to start the installation. 4. Follow the onscreen instructions to complete the upgrade. GFI LanGuard 2 Installing GFI LanGuard | 19 Screenshot 2: Import and Export settings from a previous instance 5. Once GFI LanGuard is installed, it detects the previous installation and automatically launches the Import and Export Configuration Wizard. This enables you to export various configurations from the previous version and import them into the new one. 6. Select the configurations to import and click Next to finalize the import process. 2.4 New installation 1. Logon using administrator credentials on the machine where to install GFI LanGuard. 2. Launch GFI LanGuard setup. 3. Click Install in the pre–requisite check window to download and install any missing required components. 4. In the GFI LanGuard welcome screen, click Next. GFI LanGuard 2 Installing GFI LanGuard | 20 Screenshot 3: End-user license agreement 5. Read the licensing agreement carefully. To proceed with the installation, select I accept the terms in the License Agreement and click Next. Screenshot 4: Specify user details and license key 6. Specify user details and enter license key. Click Next. GFI LanGuard 2 Installing GFI LanGuard | 21 Screenshot 5: Attendant service credentials 7. Key in the administrator credentials and password. This is by the service under which scheduled operations operate. Click Next to continue setup. 8. Click Install to install GFI LanGuard in the default location or Browse to change path. 9. Click Finish to finalize installation. When launched for the first time, GFI LanGuard automatically enables auditing on the local computer and scans the local computer for vulnerabilities. On completion, the GFI LanGuard Home page displays the vulnerability result. Note An Internet connection is required to download missing components. Note If the credentials are invalid, a message stating that this option can be skipped is displayed. It is highly recommended to provide a valid username and password and not to skip this option. Note Use Microsoft Access database only if evaluating GFI LanGuard and using up to 5 computers. For more information refer to Configuring Database Maintenance Options. GFI LanGuard 2 Installing GFI LanGuard | 22 Note Test your installation after the product is installed. For more information, refer to Testing the installation (page 25). 2.5 Post install actions GFI LanGuard can be installed on a machine with an older version of GFI LanGuard without uninstalling it. This enables you to retain configuration settings and reuse them in the new version. To import the settings from the earlier version: 1. Launch the GFI LanGuard management console from Start > Programs > GFI LanGuard 2012 > GFI LanGuard 2012. 2. Click the GFI LanGuard button > File > Import and Export Configurations… to launch the Import and Export Configurations wizard. Screenshot 6: Import and Export configurations 3. Select Import the configuration from another instance and click Next. 4. Click Browse to select the GFI LanGuard installation folder. The default location is: 64-bit machines (x64) - <Local Disk>\Program Files (x86)\GFI\ LanGuard <Version> 32-bit machines (x86) - <Local Disk>\Program Files\GFI\ LanGuard <Version> GFI LanGuard 2 Installing GFI LanGuard | 23 5. Click Next. 6. Select the settings to import and click Next. 7. While importing, GFI LanGuard asks to override or keep existing settings. Select: Table 10: Import override options Option Description Yes Override current setting with imported setting. No Keep current setting and ignore imported setting. Auto Rename Rename imported settings and keep the current settings. 8. Click OK when complete. GFI LanGuard 2 Installing GFI LanGuard | 24 3 Testing the installation Once GFI LanGuard is installed, test your installation by running a local scan to ensure it installed successfully. 1. Launch GFI LanGuard. Screenshot 7: Launch a scan 2. From GFI LanGuard home page, click Launch a Scan. Screenshot 8: Launch a scan properties 3. From Scan Target drop–down menu, select localhost. 4. From Profile drop–down menu, select Full Scan. 5. Click Scan to start the scan on the local computer. 6. The scan progress is displayed in the Scan tab. GFI LanGuard 3 Testing the installation | 25 Screenshot 9: Scan results summary 7. On completion, the Progress section will display an overview of the scan result. 8. Use the Scan Results Details and Scan Results Overview to analyze the scan result. GFI LanGuard 3 Testing the installation | 26 4 The GFI LanGuard Dashboard The Dashboard section provides you with extensive security information based on data acquired during audits. Amongst others, the Dashboard enables you to determine the current network vulnerability level, the top–most vulnerable computers, and the number of computers in the database. Topics in this chapter: 4.1 Achieving results from the dashboard 27 4.2 Using the Dashboard 27 4.3 Using the Computer Tree 28 4.4 Using Attributes 31 4.5 Dashboard actions 34 4.6 Exporting issue list 34 4.7 Dashboard views 35 4.1 Achieving results from the dashboard The dashboard is an important feature of GFI LanGuard. As the central point of the application, it enables you to perform all the common tasks supported by GFI LanGuard, including: Monitoring all computers managed by GFI LanGuard Managing scan targets. Add, edit or remove computers, domains and workgroups Deploying agents on scan targets and configure agent settings Configuring computer credentials Configuring auto–remediation options Configuring recurrent network discovery on the managed domains/workgroups/OUs Trigger security scans/refresh scan information Analyze computers security state and audit details Jump to relevant locations by clicking on security sensors and charts. 4.2 Using the Dashboard This section provides the required information on how to use the GFI LanGuard Dashboard. To display the Dashboard: 1. Launch GFI LanGuard and click Dashboard tab. GFI LanGuard 4 The GFI LanGuard Dashboard | 27 Screenshot 10: View Dashboard 2. From the computers list, select a computer or computer group. The dashboard information updates according to your selection. 4.3 Using the Computer Tree GFI LanGuard includes filtering and grouping options that enable you to quickly find a computer or domain and immediately display results. When a computer or group is selected from the computer tree, results in the dashboard are automatically updated. Press CRTL and select multiple computers to display results for specific computers. The following are functions supported by the computer tree: Simple filtering Advanced filtering Grouping Searching 4.3.1 Simple filtering To filter for a specific computer or group: 1. From the left pane, click Filter. 2. Configure the criteria and click Turn ON filters. GFI LanGuard 4 The GFI LanGuard Dashboard | 28 Screenshot 11: Simple filtering 4.3.2 Advanced filtering To filter for a specific computer or group using advanced filtering: 1. From the left pane, click Filter and Advanced filtering... 2. From the Advanced Filtering dialog, click Add. Screenshot 12: Add Filter Properties GFI LanGuard 4 The GFI LanGuard Dashboard | 29 3. Select the filter property to restrict and click Next. 4. Select the condition and key in the condition value. Click Add. 5. Repeat steps 2 to 4 for each condition. Click OK. 4.3.3 Grouping To group machines by specific attributes: 1. From the left panel, click Group. 2. Select one of the following attributes: Domain and Organizational Unit Operating System Network Role Relays Distribution Attributes. Note If Attributes is selected, select the attribute from the drop down list. For more information, refer to Using Attributes (page 31). 3. If Attributes is selected, select the attribute from the drop-down list. 4. Click Apply grouping. 4.3.4 Searching The Search tab within the Computers tree enables you to search and display results for a specific computer or group. To display results for a specific computer: 1. From the Computers tree, select Search. Screenshot 13: Search specific computers and groups 2. Key in the search criteria and use the following options: GFI LanGuard 4 The GFI LanGuard Dashboard | 30 Table 11: Search options Option Description Group results by information category Search results are grouped by category. The result contains the latest computer information. Amongst others results are grouped by: Computer Information Hardware devices Logged on Users Processes Virtual technology Group results by computer Search results are grouped by computer name. The result contains the latest computer information. Search History Search results include the information from previous scans. Advanced search Configure advanced search options. Note For more information, refer to the Full Text Searching section of the Administrator Guide. 4.4 Using Attributes Attributes enable you to group and configure single or multiple computers at one go. Attributes also enable you to remediate vulnerabilities or deploy software on specific computers based on the assigned attribute. The following sections contain information about: Assigning attributes to a computer Assigning attributes to a group Configuring attributes 4.4.1 Assigning attributes to a computer To assign attributes to a single computer: 1. Click Dashboard tab. 2. From the computer tree, right-click a computer and select Assign attributes. GFI LanGuard 4 The GFI LanGuard Dashboard | 31 Screenshot 14: Assigning attributes: Single computer 3. From the Properties dialog > Attributes tab, click Add. 4. Configure new attributes settings and click OK. 5. Click OK to save your settings. 4.4.2 Assigning attributes to a group GFI LanGuard enables you to assign attributes to specific groups, domains, organizational units and networks. Once attributes are assigned, each member of the selected group inherits the attributes settings. To assign attributes to a group: 1. Click Dashboard tab. 2. From the computers list, right-click network and select Assign attributes. 3. From the Add more computers wizard, select network and click Next. GFI LanGuard 4 The GFI LanGuard Dashboard | 32 Screenshot 15: Assigning attributes: Multiple computers 4. Click Add and configure the respective attributes. Use the Edit and Remove buttons to edit or remove the selected attributes. 5. Click Finish to save your settings. 4.4.3 Configuring attributes To configure attributes: 1. From the Properties dialog, click Attributes tab. 2. Click Add to launch the New attribute dialog. Screenshot 16: New attribute dialog 3. From the Name drop-down menu, select an attribute or key-in a name to create a new one. GFI LanGuard 4 The GFI LanGuard Dashboard | 33 4. Specify a value for the attribute in the Value field. Click OK. 5. Repeat steps 2 to 4 until you add all the required attributes. 6. Click OK to save your settings. 4.5 Dashboard actions The Actions section enables you to manage and remediate vulnerabilities and missing patches found in your network. To access the Actions section: 1. Select Dashboard tab. 2. Click Vulnerabilities or Patches tab. Screenshot 17: Actions section in the Dashboard 3. Select one of the following actions: Table 12: Dashboard actions Action Description Remediate Launch the Remediation Center to deploy and manage missing patches. Note For more information, refer to the Manual Remediation section of the Administrator Guide. Acknowledge Launch the Rule-Acknowledge Patch dialog. This enables you to acknowledge issues so that they will not affect the Vulnerability level of your network. Configure for which machine this rule applies Ignore Launch the Rule-Ignore Patch dialog. This enables you to ignore missing patches or vulnerabilities so that they will not be reported as issues in the future. Configure for which machine this rule applies and the time span that the issue is ignored. Change Sever- Launch the Rule-Change Severity dialog. This enables you to change the severity level of vulnerability. ity Configure for which machines this rule applies and the severity level. Rules Manager Launch the Rules Manager dialog. This enables you to search and remove configured rules. 4.6 Exporting issue list GFI LanGuard enables you to export issue lists to Portable Document Format (PDF), Microsoft Office Excel (XLS) or Hyper Text Markup Language (HTML). When a list supports exporting, these icons are displayed in the top-right corner of the list. Select the respective icon and configure the export settings. GFI LanGuard 4 The GFI LanGuard Dashboard | 34 4.7 Dashboard views The GFI LanGuard dashboard is made up of multiple views. These different views enable real-time monitoring of your scan targets and allow you to perform instant remedial and reporting operations. The following sections contain information about: Dashboard overview Computers view History view Vulnerabilities view Patches view Ports view Software view Hardware view System Information view 4.7.1 Overview Screenshot 18: Dashboard Overview The Dashboard Overview is a graphical representation of the security level/vulnerability level of a single computer, domain or entire network. GFI LanGuard 4 The GFI LanGuard Dashboard | 35 When a computer or domain is selected, the results related to the selected computer/domain are automatically updated in the dashboard. Below is a description of each section found in the dashboard: Table 13: Software information from an audit Section Description Network security level This rating indicates the vulnerability level of a computer/network, depending on the number and type of vulnerabilities and/or missing patches found. A high vulnerability level is a result of vulnerabilities and/or missing patches which average severity is categorized as high. Computer vulnerability distribution This chart is available only when selecting a domain or a workgroup, and displays the distribution of vulnerabilities on your network. This chart enables you to determine how many computers have high, medium and low vulnerability rating. Most vulnerable computers This list is available only when selecting a domain or a workgroup, and shows the most vulnerable computers discovered during the scan. The icon color on the left indicates the vulnerability level. Agent Status When selecting a domain or workgroup, a chart showing the overall agent status of all computers within the domain/workgroup is displayed. This enables you to determine the number of agents installed or pending installation on the selected domain/workgroup. When selecting a single computer, this section displays an icon representing the agent status. The icons are described below: Not installed - Agent is not installed on the target machine. Pending installation - Installation is pending. A status can be pending when the machine is offline or the agent is being installed. Pending uninstall - Uninstallation is pending. A status can be pending when the machine is offline or the agent is being uninstalled. Installed - Agent is installed on the target machine. Relay Agent Installed - The selected computers are relay agents. Audit status This chart is available only when selecting a domain or workgroup and enables you to identify how many audits have been performed on your network grouped by time. Vulnerability trends over time When a domain or workgroup is selected, this section displays a line graph showing the change of vulnerability level over time grouped by computer count. When a single computer is selected, this section displays a graph showing the change of vulnerability level over time for the selected computer. Computers by network role This chart is available only when selecting a domain or a workgroup and displays the number of audited computers, grouped by network role. Amongst other roles, this graph identifies the number of servers and workstations per selected domain. Computers by operating system This chart is available only when selecting a domain or a workgroup and displays the number of audited computers, grouped by the installed operating system. Computer details This section is available when selecting a single computer and enables you to view the selected computer details. Scan activity This line graph is available only when selecting a single computer and enables you to view the number of scans/audits performed on the selected computer. In addition enables you to verify if scheduled scans are being performed. GFI LanGuard 4 The GFI LanGuard Dashboard | 36 Section Description Remediation Activity This line graph is available only when selecting a single computer and enables you to view the number of remediation activities performed on the selected computer. In addition, this graph enables you to verify that auto–remediation is performed. Top 5 Issues to Address This section is available only when selecting a single computer, and displays the top five issues to address for the selected computer. Results statistics This section is available only when selecting a single computer and displays an overview of the audit result. Amongst others, the result enables you to identify the number of missing patches, number of installed applications, open ports and running services. Security Sensors This section enables you to identify issues at a glance. Click a sensor to navigate and display issues and vulnerabilities for a specific computer or group. Sensors enable you to identify: Missing Software Updates Missing service packs Vulnerabilities Firewall Issues Unauthorized Applications Audit Status Credentials setup Malware Protection Issues Agent Health Issues. GFI LanGuard 4 The GFI LanGuard Dashboard | 37 4.7.2 Computers view Screenshot 19: Analyze results by computer Select this view to group audit results by computer. From the drop-down list, select one of the options described below: Table 14: View by computers information Option Description Agent Details Select this option to view the agent status. This option enables you to identify if an agent is installed on a computer and if yes, displays the type of credentials being used by the agent. Vulnerabilities View the number of vulnerabilities found on a computer grouped by severity. Severity of a vulnerability can be: High Medium Low Potential. Patching status View the number of: Missing Security/non-Security Updates Missing Service Packs and Update Rollups Installed Security/non-Security Updates Installed Service Packs and Updates Rollups. GFI LanGuard 4 The GFI LanGuard Dashboard | 38 Option Description Open ports View the number of: Open TCP ports Open UDP ports Backdoors. Software View the number of: Antiphishing engines Antispyware engines Antivirus engines Backup applications Data loss prevention applications Device access and desk encryption applications Firewalls Installed applications Instant messengers Peer to peer applications Unauthorized applications Virtual machines VPN clients Web browsers. Hardware View information on: Number of disk drives Free disk space Memory size Number of processors Other hardware. System information View information on: The number of shared folders Number of groups Number of users Logged users Audit policy status. Attributes Adds an Attributes column and groups your scan targets by the assigned attribute. Note To launch the Overview tab and display more details on a specific computer, double click a computer from the list. Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 39 4.7.3 History view Select this view to group audit results by date for a specific computer. To configure the history starting date or history period click the link provided. Screenshot 20: History view in the Dashboard GFI LanGuard 4 The GFI LanGuard Dashboard | 40 4.7.4 Vulnerabilities View Display more details on the vulnerabilities found on a network and the number of affected computers. When a vulnerability is selected from the Vulnerability List, the Details section provides more information on the selected vulnerability. From the Details, section click Affected computers or Unaffected computers to display a list of affected and unaffected computers. Screenshot 21: Vulnerabilities view in the Dashboard Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 41 4.7.5 Patches View Display more details on the missing/installed patches and service packs found during a network audit. When a patch/service pack is selected from the list, the Details section provides more information on the selected patch/service pack. From the Details section, click Missing on to display a list of computers having the selected patch missing. Screenshot 22: Patches view in Dashboard Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 42 4.7.6 Ports View Display more details on the open ports found during a network audit. When a port is selected from the Port List, the Details section provides more information on the selected port. From the Details section, click View computers having this port open to display a list of computers having the selected port open. Screenshot 23: Ports view in Dashboard Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 43 4.7.7 Software View Display more details on the installed applications found during a network audit. When an application is selected from the Application List, the Details section provides more information on the selected application. Screenshot 24: Software view in Dashboard Note Drag and drop a column header in the designated area to group data by criteria. Note Agent-less scans require to temporarily run a service on the remote machine. Select Enable full security applications audit… to enable this service on all agent-less scanning profiles. GFI LanGuard 4 The GFI LanGuard Dashboard | 44 4.7.8 Hardware View Display more information on the hardware found during a network audit. Select hardware from the list to display more details. Screenshot 25: Hardware view in Dashboard Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 45 4.7.9 System Information View The System Information tab, displays information associated with the operating system of a scan target(s). Screenshot 26: System Information view in Dashboard Note Drag and drop a column header in the designated area to group data by criteria. GFI LanGuard 4 The GFI LanGuard Dashboard | 46 5 Troubleshooting and support This chapter explains how to resolve issues encountered while using GFI LanGuard. These issues can be resolved using the contents of this Installation and Setup Guide. If any issues remain unresolved after reviewing the manual, check if your problem is listed below. Refer to the following sections for information about resolving common issues and contacting our support team. Topics in this chapter: 5.1 Resolving common issues 47 5.2 Using the Troubleshooter Wizard 49 5.3 GFI SkyNet 51 5.4 Web Forum 51 5.5 Requesting technical support 51 5.1 Resolving common issues The table below provides you with solutions to the most common problems you may encounter when using GFI LanGuard: Table 15: GFI LanGuard common Issues Issue Encountered Solution/Description Failed to connect to database error is encountered when trying to configure the database backend. Description This issue may occur when the following two conditions are met: 1. GFI LanGuard is installed on Windows 2000 SP4 with MDAC 2.5 SP 3 2. The database backend is SQL Server® having the database instance name different from the SQL Server® machine name. Solution Install Microsoft® Data Access Components (MDAC 2.6 or later) on GFI LanGuard machine and try again. MDAC can be downloaded from: http://go.gfi.com/?pageid=download_mdac The database structure is incorrect. Do you want to delete and recreate the database? Warning is encountered when trying to configure the database backend. Description This issue occurs when the database structure is corrupted. Or The database returns a timeout because the connection cannot be established. Solution When this message is encountered: Check that all SQL credentials are correct and there are no connectivity problems between the GFI LanGuard machine and the SQL server. It is important to note that when OK is clicked all saved scans are lost. GFI LanGuard 5 Troubleshooting and support | 47 Issue Encountered Solution/Description When trying to access the Change database tab while configuring an SQL database, a Failed to connect to database error is encountered Description This issue may occur when the following two conditions are met: GFI LanGuard is installed on Windows 2000 SP4 with MDAC 2.5 SP 3. The database backend is SQL Server® having the database instance name different from the SQL Server® machine name. Solution Install Microsoft® Data Access Components (MDAC 2.6 or later) on the GFI LanGuard machine and try again. Note MDAC can be downloaded from: http://go.gfi.com/?pageid=download_ mdac Incomplete results and errors when scan- Description ning remote machines Errors similar to the following may be encountered: Failed to open test key to remote registry The scan will not continue Access Denied Could not connect to remote SMB server. These errors may be encountered because: The remote machine has an account similar to the one used by GFI LanGuard to log in as an administrator. The user account used by GFI LanGuard does not have administrative privileges. Solution To solve this issue do one of the following: Log on the GFI LanGuard machine and configure GFI LanGuard to use an alternate domain administrator account. Delete the local user account on the remote machine. Launch GFI LanGuard executable with ‘Run As’ using a Domain Administrator account. Note For more information, refer to http://go.gfi.com/?pageid=LAN_ ProbScanningRM GFI LanGuard program updates not working Description Updates will not work if GFI LanGuard machine does not have a direct connection to the Internet. Solution To solve this issue do one of the following: Configure GFI LanGuard machine to have direct Internet access. Install another instance of GFI LanGuard on a machine with Internet access and configure GFI LanGuard to check for updates from the new installation. Note For more information refer to http://go.gfi.com/?pageid=LAN_ CheckAltUpdates GFI LanGuard 5 Troubleshooting and support | 48 Issue Encountered Solution/Description Firewall installed on GFI LanGuard is blocking connection with target computers Description Scanning might slow down or be blocked if a firewall is installed on GFI LanGuard machine. Solution Configure the firewall to allow the following components in outbound connections: <..\Program Files\GFI\LanGuard>\*.exe <..\Program Files\GFI\LanGuard Agent>\*.exe Note For more information, refer to http://go.gfi.com/?pageid=LAN_ SetBestPerformance GFI LanGuard is failing to retrieve workgroup computers when using Enumerate Computers Description GFI LanGuard uses the Windows mechanism to retrieve the machines within a workgroup. In this mechanism a Master Browser computer will create and store a list of all computers. In some cases, the Master Browser role can fail resulting in GFI LanGuard not retrieving computers information. Note To solve this issue, refer to http://go.gfi.com/?pageid=LAN_ CannotEnumerate GFI LanGuard found open ports that another port scanner found closed Description GFI LanGuard uses a different approach than other port scanners to detect open ports. Solution To view the status of a port and determine if the port is closed or opened: 1. Click Start > Programs > Accessories > Command Prompt. 2. Key in netstat –an, and press Enter. 3. The generated list displays all computer active connections. 5.2 Using the Troubleshooter Wizard The GFI LanGuard troubleshooter wizard is a tool designed to assist you when encountering technical issues related to GFI LanGuard. Through this wizard, you are able to automatically detect and fix common issues as well as gather information and logs to send to our technical support team. To use the Troubleshooter Wizard: 1. Launch the troubleshooting wizard from the Start > Programs > GFI LanGuard 2012 > GFI LanGuard 2012 Troubleshooter. 2. Click Next in the introduction page. GFI LanGuard 5 Troubleshooting and support | 49 Screenshot 27: Troubleshooter wizard – Information details 3. In the Information details page select one of the following options described below: Table 16: Information gathering options Option Description Automatically detect and fix known issues (Recommended) Configure GFI LanGuard to automatically detect and fix issues. Gather only application information and logs Gather logs to send to GFI support. 4. Click Next to continue. GFI LanGuard 5 Troubleshooting and support | 50 Screenshot 28: Troubleshooter wizard – Gathering information about known issues 5. The troubleshooter wizard will retrieve all the information required to solve common issues. Click Next to continue. 6. The troubleshooter will fix any known issues that it encounters. Select Yes if your problem was fixed or No if your problem is not solved to search the GFI Knowledge base for information. 5.3 GFI SkyNet GFI maintains a comprehensive knowledge base repository, which includes answers to the most common problems. GFI SkyNet always has the most up-to-date listing of technical support questions and patches. In case that the information in this guide does not solve your problems, next refer to GFI SkyNet by visiting http://kb.gfi.com/. 5.4 Web Forum User to user technical support is available via the GFI web forum. Access the web forum by visiting http://forums.gfi.com 5.5 Requesting technical support If none of the resources listed above enable you to solve your issues, contact the GFI Technical Support team by filling in an online support request form or by phone. Online: Fill out the support request form and follow the instructions on this page closely to submit your support request on: http://support.gfi.com/supportrequestform.asp Phone: To obtain the correct technical support phone number for your region visit: http://www.gfi.com/company/contact.htm GFI LanGuard 5 Troubleshooting and support | 51 Note Before contacting Technical Support, have your Customer ID available. Your Customer ID is the online account number that is assigned to you when first registering your license keys in the GFI Customer Area at: http://customers.gfi.com. We will answer your query within 24 hours or less, depending on your time zone. Documentation If this manual does not satisfy your expectations, or if you think that this documentation can be improved in any way, let us know via email on [email protected]. GFI LanGuard 5 Troubleshooting and support | 52 6 Glossary A Access™ A Microsoft® desktop relational database management system included in the Microsoft® Office package. Access™ is normally used for small databases. Active Directory™ (AD) A technology that provides a variety of network services, including LDAP-like directory services. Anti-spyware A software countermeasure that detects spyware installed on a computer without the user's knowledge. Antivirus A software countermeasure that detects malware installed on a computer without the user's knowledge. Apache web server An open source HTTP server project developed and maintained by the Apache software foundation. Applications auto-uninstall An action that enables the auto-uninstall of applications that support silent uninstall from GFI LanGuard. Auto-download A GFI LanGuard technology that automatically downloads missing patches and service packs in all 38 languages. Auto-patch management A GFI LanGuard technology that automatically downloads missing Microsoft® updates and deploys them over the network. Auto-remediation A GFI LanGuard technology that automatically downloads and deploy missing patches. If an application is blacklisted in GFI LanGuard, auto-remediation will uninstall the application from the target computer during scheduled operations. B Backdoor program An alternative method used to access a computer or computer data over a network. Batch-files A text files containing a collection of instructions to be carried out by an operating system or an application. GFI LanGuard 6 Glossary | 53 Blacklist A list of USBs or Network devices names that are considered as dangerous. When a USB\Network device name contains a blacklisted entry while scanning a network, GFI LanGuard will report the device as a security threat (High security vulnerability). Bluetooth An open wireless communication and interfacing protocol that enables exchange of data between devices. Bulletin Information Contains a collection of information about a patch or a Microsoft® update. Used in GFI LanGuard to provide more information on an installed patch or update. Information includes; Bulletin id, title, description, URL and file size. C Common Gateway Interface (CGI) A communication script used by web servers to transfer data to a client internet browser. Common Vulnerabilities and Exposures (CVE) A list of standardized names for vulnerabilities and other information security exposures. The aim of CVE is to standardize the names for all publicly known vulnerabilities and security exposures. D Dashboard A graphical representation that indicates the status of various operations that might be currently active, or that are scheduled. Demilitarized Zone (DMZ) A section of a network that is not part of the internal network and is not directly part of the Internet. Its purpose typically is to act as a gateway between internal networks and the internet. deploycmd.exe A GFI LanGuard command line tool, used to deploy Microsoft® patches and third party software on target computers. DMZ A section of a network that is not part of the internal network and is not directly part of the Internet. Its purpose typically is to act as a gateway between internal networks and the internet. DNS A database used by TCP/IP networks that enables the translation of hostnames into IP numbers and to provide other domain related information. GFI LanGuard 6 Glossary | 54 DNS Lookup tool A utility that converts domain names into the corresponding IP address and retrieves particular information from the target domain Domain Name System A database used by TCP/IP networks that enables the translation of hostnames into IP numbers and to provide other domain related information. E Enumerate computers tool A utility that identifies domains and workgroups on a network. Enumerate users tools A tools which enables you to retrieve users and user information from your domain/workgroup. Extensible Markup Language (XML) An open text standard used to define data formats. GFI LanGuard uses this standard to import or export scanned saved results and configuration. F File Transfer Protocol A protocol used to transfer files between network computers. FTP A protocol used to transfer files between network computers. G GFI EndPointSecurity A security solution developed by GFI that helps organizations to maintain data integrity by preventing unauthorized access and transfers from removable devices. GPO An Active Directory centralized management and configuration system that controls what users can and cannot do on a computer network. Group Policy Object (GPO) An Active Directory centralized management and configuration system that controls what users can and cannot do on a computer network. I ICMP pings The Internet Control Message Protocol (ICMP) is one of the core protocols of the Internet Protocol Suite. It is used by the operating systems of networked computers to send error GFI LanGuard 6 Glossary | 55 messages indicating, for example, that a requested service is not available or that a host or router could not be reached. ICMP can also be used to relay query messages. impex.exe A Command line tool, used to Import and Export profiles and vulnerabilities from GFI LanGuard. Internet Control Message Protocol (ICMP) The Internet Control Message Protocol (ICMP) is one of the core protocols of the Internet Protocol Suite. It is used by the operating systems of networked computers to send error messages indicating, for example, that a requested service is not available or that a host or router could not be reached. ICMP can also be used to relay query messages. Internet Information Services (IIS) A set of Internet-based services created by Microsoft® Corporation for internet servers. L Linux An open source operating system that is part of the Unix operating system family. lnsscmd.exe A GFI LanGuard command line tool that allows running vulnerability checks against network targets. Local Host In networking, the local host is the computer you are currently using. One can reference to the local host by using the reserved IP address 127.0.0.1. In this manual the Local host is the machine where GFI LanGuard is installed. M Mail server The server that manages and stores client emails. Malware Composed from malicious and software, malware is a general term used for all software developed to harm and damage a computer system. Viruses, worms and Trojans are all type of malware. Microsoft® Access™ database A Microsoft® desktop relational database management system included in the Microsoft® Office package. Microsoft® Access™ is normally used for small databases. Microsoft® IIS A set of Internet-based services created by Microsoft® Corporation for internet servers. GFI LanGuard 6 Glossary | 56 Microsoft® Windows service packs A collection of updates and fixes provided by Microsoft® to improve an application or an operating system. Microsoft® WSUS An acronym for Microsoft® Windows Server Update Services. This service enables administrators to manage the distribution of Microsoft® updates to network computers. N NETBIOS An acronym for Network Basic Input/output. This system provides services to allow applications on different computers within a network to communicate with each other. Netscape A web browser originally developed by Netscape Communications Corporation. O Open Vulnerability and Assessment Language (OVAL) A standard that promotes open and publicly available security content, and standardizes the transfer of this information across the entire spectrum of security tools and services. OVAL A standard that promotes open and publicly available security content, and standardizes the transfer of this information across the entire spectrum of security tools and services. P Patch agent A background service that handles the deployment of patches, service packs and software updates on target computers. Python scripting A high-level computer programming scripting language. R Remote Desktop Protocol A protocol developed by Microsoft® to enable clients to connect with the user interface of a remote computer. S SANS An acronym for System Administration, Networking and Security research organization. An institute that shares solutions regarding system and security alerts. GFI LanGuard 6 Glossary | 57 Scan profiles A collection of vulnerability checks that determine what vulnerabilities are identified and which information will be retrieved from scanned targets. Script Debugger A GFI LanGuard module that allows you to write and debug custom scripts using a VBScriptcompatible language. Simple Network Management Protocol (SNMP) Simple Network Management Protocol is a technology used to monitor network devices such as, routers, hubs and switches. SNMP Acronym for Simple Network Management Protocol, a technology used to monitor network devices such as, routers, hubs and switches. SNMP Auditing tool A tool that reports weak SNMP community strings by performing a dictionary attack using the values stored in its default dictionary. SNMP Walk tool A tool used to probe your network nodes and retrieve SNMP information. Spyware A form of malware intended to collect information from a computer without notifying the user. SQL Server Audit tool A tool used to test the password vulnerability of the -sa- account (i.e. root administrator), and any other SQL user accounts configured on the SQL Server. SQL Server® A Microsoft® relational database management system. Microsoft® included extra functionality to the SQL Server® (transaction control, exception handling and security) so that Microsoft® SQL server can support large organizations. SSH Module A module used to determine the result of vulnerability checks through the console (text) data produced by an executed script. This means that you can create custom Linux/UNIX vulnerability checks using any scripting method that is supported by the target-s Linux/UNIX OS and which outputs results to the console in text. T TCP ports Acronym for Transmitting Control Protocol. This protocol is developed to allow applications to transmit and receive data over the internet using the well-known computer ports. GFI LanGuard 6 Glossary | 58 Terminal Services A service that allows connecting to a target computer and managing its installed applications and stored data. Traceroute tool A tool used to identify the path that GFI LanGuard followed to reach a target computer. Trojans A form of malware that contains a hidden application that will harm a computer. U UDP ports An acronym for User Datagram Protocol, these used to transfer UDP data between devices. In this protocol received packets are not acknowledged. Uniform Resource Locator (URL) The Uniform Resource Locator is the address of a web page on the world wide web. Universal Serial Bus (USB) A Serial bus standard widely used to connect devices to a host computer. URL The Uniform Resource Locator is the address of a web page on the world wide web. V VBScript A Visual Basic Scripting language is a high-level programming language developed by Microsoft®. Virus A form of malware that infects a computer. The aim of a virus is to harm a computer by corrupting files and applications. A virus is a self-replicating program and can copy itself all over the computer system. W Web server A server that provides web pages to client browsers using the HTTP protocol. White-list A list of USBs or Network devices names that are not considered as dangerous. When a USB/Network device name contains a white-listed entry while scanning a network, GFI LanGuard will ignore the device and consider it as a safe source. Whois tool A tool that enables you to look up information on a particular domain or IP address. GFI LanGuard 6 Glossary | 59 Wi-Fi/Wireless LAN A technology used commonly in local area networks. Network nodes use data transmitted over radio waves instead of cables to communicate with each other. X XML An open text standard used to define data formats. GFI LanGuard uses this standard to import or export scanned saved results and configuration. GFI LanGuard 6 Glossary | 60 7 Index A Install 18, 23 Activity 36 Installing 8, 10 Advanced 15, 28 L Agent 14, 36, 38, 44, 49 Agent-based 10 Agent-less 8, 10, 16, 44 Antiphishing 39 Antispyware 39 Attendant service 9, 22 Attributes 30-31, 39 Audit 27, 36, 38, 40, 42-45 B Backup 39 C Check 19-20, 47 Client 9-10 Command Line Tools 9 Components 9, 14, 19, 22, 47 Level 27, 34-35 M Malware 37 Management Console 9, 12, 23 Microsoft Access 22 Missing Service Packs and Update Rollups 38 Monitor 10 N NetBIOS 17 Notifications 7 O Open TCP ports 39 Open UDP ports 39 OVAL 7 Computer 8, 22, 25, 28, 36 P Computer Tree 28, 31 Password 22 Conditions 47 Ports 14, 35, 37, 39, 43, 49 Custom 7 Processors 39 D Protocols 16 Dashboard 27, 31, 34-35, 40-46 R E Real-time 35 Enumerate Computers 49 Export 20, 23 F Find 28 Full Text Searching 31 G Groups 30, 32, 39 Registry 8, 16, 48 Relay Agents 9-10, 15, 36 Remediation Center 34 Remediation Operations 8, 16 S Scanning Profiles 9 Scheduled Scans 36 Security Scans 9, 27 H Security Updates 17, 38 Hardware 7, 14, 31, 35, 39, 45 Server 8-10, 14, 47 I Sessions 9 Import 18, 23 GFI LanGuard SMB 8, 17, 48 Index | 61 SNMP 17 Software 14, 18, 35, 37, 39, 44 SQL 16, 47 SSH 16 System Information 35, 46 U Unauthorized 7, 39 Unauthorized Applications 37 Uninstall 9, 36 Upgrading 18 Users 31, 39 V Vulnerabilities 31, 34-36, 38, 41 Vulnerability Assessment 7 W WMI 16 GFI LanGuard Index | 62 USA, CANADA AND CENTRAL AND SOUTH AMERICA 15300 Weston Parkway, Suite 104 Cary, NC 27513, USA Telephone: +1 (888) 243-4329 Fax: +1 (919) 379-3402 [email protected] UK AND REPUBLIC OF IRELAND Magna House, 18-32 London Road, Staines-upon-Thames, Middlesex, TW18 4BP, UK Telephone: +44 (0) 870 770 5370 Fax: +44 (0) 870 770 5377 [email protected] EUROPE, MIDDLE EAST AND AFRICA GFI House, San Andrea Street, San Gwann, SGN 1612, Malta Telephone: +356 2205 2000 Fax: +356 2138 2419 [email protected] AUSTRALIA AND NEW ZEALAND 83 King William Road, Unley 5061, South Australia Telephone: +61 8 8273 3000 Fax: +61 8 8273 3099 [email protected]