* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
Download Coolsat R-Link Quick Setup Guide How To Do a Database
Survey
Document related concepts
Transcript
And NOW will accept DHCP values from the Router or Modem How to Load a Coolsat Channel Database List Items needed 1. Working Channel list or template (This template can be downloaded via the Internet). 2. Coolsat v2.4 programming software. Procedure to properly load a Coolsat Channel List 1. Via the remote press the Menu button and select System Setting. Select Database Reset then press the OK button and select Delete All Channels then press OK again. All channels will be deleted. Press Exit to leave the Menu. A message will display of No Channels. 2. Connect the Receiver to the computer using the Straight through Programming Cable 3. Run the Pro Loader V2.4 software and select the Channels tab on the upper top application make sure To Receiver and Normal Channels are checked. 4. Next, click the Browse button on the application and select the path/directory where the desired Channel list is located. When found highlight it and click on the Open button to continue. 5. Next, click Connect button. A dialog box opens and shows the current File version. 6. Press the Start button to continue the programming process. ***DO NOT INTERRUPT*** 7. After completion a dialog box will show FINISH displays, click on it. 8. The Coolsat will reboot and in just a few seconds you have successfully loaded the Working Channel list into the Coolsat. You can now reconnect the receiver and watch TV. To create a backup channel list - Select To Computer > Click Connect > Name your File > Click Save > Click Connect and your download will complete.