Download Mira 3

Amplifiers
Brio |Mira | Cursa | Maia | Exon | Ios | Elicit
Mira
The Rega Mira 3 Amplifier is a high performance audio amplifier using the
Improved “type 3” Rega Alpha-Encoder control system comprising of high
quality loss-less relays, plus a digitally controlled analog switched resistor
network volume control. The Mira 3 is housed in the Rega custom-built
extruded aluminium case incorporating a high thermal efficiency heat sink.
Rega has kept the same level of performance and synergy between stages
as in the original Mira 2000 amplifier with a better level of functionality &
controllability in the volume control user interface.
The Mira 3 is a 60 Watt integrated amplifier with full flexibility within the
range. It has a Pre-amplifier output and Power amplifier input. The gain of
the power amplifier is 28dB for full output, and thus enables the amplifier to
be expanded to drive Bi-amplifier or active speaker systems (Sub Bass
etc). It can also drive multiple speakers if required or be part of a high
performance AV system.
The amplifier has a fully short circuit and DC protected output stage and
high quality Evox film capacitors have been used in the signal path
throughout.
Volume control
The volume level is controlled via a microprocessor, which in turn takes its
information from the volume digital encoder on the front panel or remote
control handset.
The volume control has a resolution of 1dB per step, giving a total range of
80 steps over the available gain or volume range of 80dB.
There is a calibrated LED display comprising of 20 LED's, which indicates
the gain level or relative position of the volume control; this is calibrated in
4dB steps, across the total gain of volume range. The left and right
channels are matched and balanced within 0.2dB, ensuring a centrally
placed soundstage no matter what the volume position or which gain level
has been set.
Features...
The Highest performance
intergrated amplifier to be
produced by Rega.
Remarkable Sound Quality.
New Technical innovations.
Stylish High Quality looks.
Highly Versatile, can be
used as a Pre Amplifier or a
Power Amplifier and in AV
Systems.
Full flexibility within the
range.
Improved version 3 Rega
Alpha-Encoder control
system.
Digital control of the analog
switched resistor volume
control and input relays.
Calibrated LED electronic
volume display.
High performance switched
resistor volume control.
Rega Custom built extruded
aluminium case.
High quality relays used in
the input switching.
Common base driver stage
as used in the Maia & Exon
amplifiers.
Can drive the most of
awkward of speaker
systems.
Dual Tape outputs.
High quality plated through
hole printed circuit board,
using silver coating