Download high quality inductive components

HIGH QUALITY INDUCTIVE COMPONENTS
PREMO Current Sensors accurately measure up to 1000 Amps.
Closed-loop Hall Effect sensors offer high performance and excellent linearity.
PREMO enhances its current sensors product range with the newest HCT-1000-SH series, a high
current Closed Loop Hall Effect Sensor. New market trends are going to the high current and high
frequency devices, making a must to test and measure with excellent accuracy current levels up to 1000
Amps with any type of waveform (DC, AC, pulse, etc.).
By means of close loop solution the high accuracy and linearity is guaranteed keeping values as low as
0.1%. The current sensor allows overload capabilities with a measuring range up to ± 3000 Amps.
The HCT-1000-SH current sensor has been designed in order to meet the highest safety requirements
and is fully isolated with plastic housing, meeting isolation values higher than 4000 Vac.
An intelligent electronics allow supplying the sensor either with ±15 Vdc or ± 24 Vdc which make it
much easier for design engineers.
Advantages and main characteristics:









Excellent accuracy ± 0.1%
Very good linearity ± 0.1%
Compact size: 100x70x110 mm
Nominal current = 1000 Amps
Measuring current = ± 3000 Amps
Transformation ratio 1:5000
Supply voltage = ± 15-24 Vdc
Isolation > 4000 Vac
Outputs with Blade connectors
With an operating temperature range of -40 to +85ºC, these sensors are particularly suitable for AC
variable speed drives and servo motor drives, battery supplied, Uninterruptible Power Supplies (UPS),
static converters for DC motor drives, switched Mode Power Supplies (SMPS), and power supplies for
welding applications.
PREMO encourages you to study the use of this new Hall Effect sensor in new or existing designs. You
can always visit our website to see our current sensors product range. www.grupopremo.com
PREMO
PREMO worldwide leading company designs, manufacture and supplies standard and custom made
inductive components for the electronics market. Our wide range of products are RFID transponder
coils, EMC filters, PLC accessories, planar transformers, current transducers, chokes, mainly for
automotive, renewable energy and railways markets.
To download this product datasheet: http://www.grupopremo.com/in/file/604
To see PREMO current sensing product range:
http://www.grupopremo.com/in/technology/sector/24/.html
For further information you can always contact:
Communication Department:
Rocío Arrupe
[email protected]
PREMO Headquarter
Premo C/. Conchita Supervía
13 - 08028 Barcelona (Spain)
www.grupopremo.com
[email protected]
Phone number: 34 934 098 980
Fax: +34 934 906 682