Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download CERIAN Module
Document related concepts
History of electric power transmission wikipedia , lookup
Buck converter wikipedia , lookup
Alternating current wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Solar micro-inverter wikipedia , lookup
Electric battery wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Mains electricity wikipedia , lookup
Transcript
08/12 DS006 – Issue 1 CERIAN High Efficiency Module CERIAN Module Description CERIAN modules provide maintained emergency operation for T8 lamps from 3, 4 or 5 cell NiCd batteries. CERIAN modules are fitted with four pole relays to switch all four lamp connections from the ballast to the inverter. The ballast hold off relay is to switch the ballast off during emergency lighting test. Product Features High Efficiency rectified output optimised for T8 lamps Compact size allows simple installation TM AutoTest versions fully compliant with IEC 62034 TM AutoTest versions with DALI and Potential Free options Deep Discharge Protection fitted ENEC Approved – NON-AUTOTEST ONLY 3 Year Warranty 1 or 3 hour variants available CERIAN High Efficiency Module CERIAN Module Technology Part Number Deep Discharge Protection All modules are fitted with deep discharge protection (DDP) as standard. Module SR664/M3 SR664/M1 Type 3x 4Ah 3x 1.5Ah Lamps T8 18,36W SR665/M3 SR665/M1 4x 4Ah 4x 1.5Ah T8 18, 36, 58W SR666/M3 SR666/M1 5x 4Ah 5x 1.5Ah T8 70W Isolating Transformer Mackwell transformers comply with relevant standards and incorporate a re-settable thermal device to protect the transformer from excessive overload conditions. Battery Charger Provides sufficient charge to achieve rated duration from 24 hour charge. Voltage Sensing Circuit The AC power supply is sensed so that switching occurs at between 60% and 85% of the nominal mains supply. Indicator The LED indicator is illuminated when a charge is flowing to the cells. Flexible 1x0.6mm high temperature orange and pink leads connect the indicator to the module. The indicator requires a 8mm hole. The indicator supplied with AutoTest™ modules is bi-colour red and green, with red and green wires. Specifications Module Dimension Can Type V0 Plastic Width 44mm Height 35mm Length 150mm Fixing Centres 140mm Weight 250g Mains Input Standard 240V± 6% 50/60Hz. AutoTestTM Variants ASR664/M3 3x 4Ah ASR664/M1 3x 1.5Ah T8 18,36W Data quoted at 240V input: Other voltages and frequencies available. ASR665/M3 4x 4Ah ASR665/M1 4x 1.5Ah T8 18,36, 58W Mains Current 80mA max – AutoTest 40mA max – Non AutoTest ASR666/M3 5x 4Ah ASR666/M1 5x 1.5Ah T8 70W Temperature 0 to +50°C ambient, maximum case The AutoTestTM versions comply fully with temperature 70°C at Tc point. IEC 62034. For DALI versions add suffix /D1, for Potential Free add suffix /P. Battery Charge Current Please note that for non-DALI AutoTest™ products, the start times of the tests are set automatically to ensure random testing of the units at times of minimum risk. As a consequence tests may occur at any time, and caution should be exercised in situations where this may be inconvenient. 260mA nominal for 3hr duration. 100mA nominal for 1hr duration. Battery Discharge Current 1.05 A nominal. Battery NiCd only Caution: REVERSING BATTERY POLARITY WILL Lamp performance can be affected CAUSE DAMAGE by lead length. Lamp wires should be kept to a minimum length. Do not insulation test this product. The rectified output of these modules may lead to mercury migration of the lamp We reserve the right to alter specifications without prior notice.
