Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
LIGHT*WAND® - Music Stand Light Employing the latest technologies and superior design the LIGHT*WAND® music stand light was designed to provide the highest quality and safest LED music stand light for professional musicians. LED (Light Emitting Diode) Technology provides a product that utilises its well known benefits of long life (in excess of 10 continuous years use) and very low heat output thus avoiding burns from conventional lighting. When combined with Bead*light® Technologies (patents pending) the light output becomes even and glare-free which is easy on the eye when adapting from music score to conductor and back and also, the eye is not drawn to any bright spots on the score, as there are none! Developed with professional musicians the design dealt with the quality of the light as the paramount objective. The colour of the light is close to daylight; after all, the eye has evolved over millions of years in daylight and this in turn provides high definition colour reflection. The colour prevents yellowing of the score as experienced with 19th Century incandescent technology and the score reflects increased legibility without the need to increase the light level. The light contains a blue tint scientifically chosen for its beneficial effect on human eyesight. Professional musicians benefit from this as blue is the colour least likely to cause eye fatigue (red is the worst). Furthermore, white with a tint of blue is the colour acknowledged by the scientific community, which contributes to human concentration. Essential for professionals. The lamp, designed with quality and style in mind, has a slim profile and the lamp head shroud is designed to avoid light spillage ensuring that the light is kept on the score and not into the eye line of the audience, conductor or fellow professionals. The shroud is manufactured from aluminium which, combined with the advanced thermal management, ensures the lamp head unit operates at or about 6oC above ambient, avoiding accidental burns. A universal clamp ensures that the lamp fits most makes of music stand. Using techniques and technologies principally developed by Telectra for the aerospace industry and in addition to the incorporation of Bead*light® Technologies and the advanced thermal management, the product also comprises on-board current control to avoid light fluctuation which could disturb the musician. The product is available as a mains version or battery controlled. The battery version is safe for outdoor use and it can provide power for in excess of 10 hours. The recharge unit that comes with the battery box has a “soft start” facility to check for possible battery faults, senses the charge to bring the battery back to full capacity and delivers it. It also contains short circuit and high temperature protection. The product is a “Class 1 LED product” (the safest category of LED lighting) classified under the International / European Standard IEC 60825-1:2001 / EN 60825-1:2001. LIGHT*WAND® - Conductor Stand Light For Conductor and Musical Director alike, an extended version of the LIGHT*WAND® Music Stand Light is available. Offering all the benefits of its smaller companion, the lamp head is 550 mm long, compared to the 380 mm of the music stand light. LIGHT*WAND® Music Stand Light and LIGHT*WAND® Conductor Stand Light. Technical Details Voltage: 12 volts Power: Mains Adaptor or provided by 12V, 1300mAh rechargeable power cell unit Head Unit: 380 mm in length and weighs 150 g. 12 * LED light source with even glare-free light provided by Bead*light® Technologies (patents pending). Head Unit guaranteed for 5 years of normal usage. Gooseneck: Flexible gooseneck incorporating universal mounting bracket & connectors. Battery Box: Sealed unit incorporating Power cell, self-resetting fuse, on/off switch. Recharge Unit: 230v, 50Hz input, fast charge (3.5 hours) 13.7-14.5V D.C. @ 600mA. 110v, 60Hz input, fast charge (3.5 hours) 13.7- 14.5V D.C. @ 600mA. Operating Time: (Battery Version)Lamp provides in excess of 10 hours light from a fully charged battery. Light: White with a hint of blue, scientifically chosen as the colour least likely to cause eye fatigue and specifically seen as an aid to concentration. The light cowling prevents light spillage providing an unobtrusive light. Product: Product consists of Lamp Head Unit, Gooseneck with universal clamp and Mains Adaptor OR Battery Box and Recharge Unit Operating Temperature: -35oC to +95oC Typical surface temp: Up to 6oC above ambient IP classification: IP 44 – suitable for outdoor use with battery box. (Excludes mains adaptor and recharge unit) Standards compliance: CE marked Complies with IEC 60598 Class 1 LED product (IEC 60825-1:2001/ EN 60825-1:2001)