Download Stunner LED Strip FAQ`s

Stunner LED Strip
FAQ’s
How do I maximize the shimmer effect in my aquarium using Stunner LED’s?
LED’s will produce fantastic shimmering on their own, but to increase the effect you can also agitate
the surface of the water by redirecting water flow.
How long will the LED’s in my light last?
Typically, LED’s are rated for 50,000+ hours of operation.
Which Stunner LED light is best suited for a Refugium?
We recommend our 8,000K white or 8,000K/453nm blue Stunner for refugiums.
If I run a fan next to the Stunner will it increase the bulb life?
The Stunner has been designed to operate without a fan. It does not need additional sources of cooling.
Can I connect the Stunner to a dimmer?
You can connect the Stunner up to a timer, but use of a dimmer or controller is not recommended at
this time.
How water resistant are the Stunner LED strips and connectors?
The Stunner LED strips and connections are completely waterproof when installed properly, making
them an excellent choice for installing in all-in-one aquariums.
Which Stunner is best for producing the Shimmer effect?
The combo Stunner #8011 White/Actinic Blue will provide an excellent shimmering effect while also
providing excellent color rendition.
Can I leave my Stunner on all the time?
Yes. You can leave the Stunner on all of the time. They have an incredible 50,000-hour life expectancy.
Stunner LED Strips
FAQ’s
Will the tape on my Stunner LED stick to wood?
The Stunner comes with a very durable 3M tape. It will stick to many surfaces including wood. You
may also use the supplied screws to secure it more firmly.
Can the Stunner be used for saltwater fish aquariums?
Yes. With the Stunner you can add a touch of blue, or UV. Plus, you’ll get that shimmer effect you’ve
been looking for.
How many Stunners can I link together?
You may operate up to 6 Stunner Strips with a single 24V power supply.
How do I install the Stunner strip?
Installation is simple and straightforward. Download complete installation instructions here.
Can I mount the Stunner LED inside a light fixture?
Yes, you can add the Stunner to the inside of an existing light fixture, but great care should be taken
to ensure it is not near metal lamps or any other device that is above 50° C.
Can I use the Stunner LED Strips in a canopy?
Yes, the Stunner is designed for canopy installation. In order to maintain maxiumum light output and
life expectancy, additional fan cooling is strongly advised.
Can the Stunner LED Strip be placed directly on an aquarium?
No. The Stunner is designed to be mounted to a canopy. It is not intended to be placed directly on the
top of an aquarium.
What is the difference between the 403nm and 453nm Stunner?
The 403nm emits ultaviolet purple light that is ideal for viewing many coral species at night. The
453nm emits a purple-blue light that is great for enhancing color, moonlighting and for creating dawn
to dusk cycles.
Stunner LED Strips
FAQ’s
Will the Stunner grow hard coral or SPS coral?
Depending on configuration and the number of Stunners used, the Stunner can support a wide variety
of animal life. However, we recommend using the Stunner LED for accenting the colors of coral and
using it to supplement other lights.
Can the Stunner be used for planted aquariums?
Absolutely. The 8000K version will be the best for plants.
Why does the 403nm UV Stunner make my water look cloudy?
The 403nm wavelength tends to pick up very small suspended solids (even chemicals in the water.)
The Stunner is not malfunctioning, its simply showing the minute suspended solids in the water column.
Is the Stunner LED UL/CSA approved?
The Stunner LED uses a low voltage UL listed wall transformer.
What maintenance is required on my Stunner LEDs?
Aquarium Lighting maintenance should always include a once per week inspection for salt creep or
corrosion. Wiping the Stunner down with a cloth regularly will ensure maximum life expectancy and
performance.
I have a nano-aquarium, which Stunner LED combination works best for marine & reef aquariums?
We recommend using 8000K/453nm Blue Stunner strips or combining it with our 453nm Blue Stunner
strips for a deeper “blue” look. If your stocking LPS and soft corals like Zoa polyps, the 403nm Violet
Stunner LED strip will also help increase both color and fluorescence in your corals.
Will the Stunner LED strips work overseas?
The Stunner LED strip uses a 100-220V, 24V wall transformer rated at 2.5A. The transformer includes a 120V powercord, however you can usually locate a powercord for your country.