Download File - Lighting Worxs

LIGHTING WORXS
EEKO-Line
D-LUX-Line
Omni-LINE
Professional LED Solutions
You have the ideas;
we have know-how
and the solutions
LIGHTING
WORXS
Lighting Worxs Limited
9-9A Oxford Terrace
Wellington
Ph.04 385 1110
[email protected]
www.lightingworxs.co.nz
EEKO-Line Multi Pro
-
Concept Sketch
With EEKO-Line everything is possible.
Let your ideas become reality!
LIGHTING WORXS
EEKO-Line: Multi Pro
LIGHTING WORXS
EEKO-Line: Tilt
LIGHTING WORXS
EEKO-Line & D-LUX-Line
Configurations
EEKO-Line & D-LUX-Line are simply the most adaptable LED carrying aluminium extrusions
available in New Zealand and it’s made right here!
When combined with the clever range of end caps, joiners and mountings you can create lighting
solutions to suit every situation.
The EEKO-Line & D-LUX-Line Channel extrusions are 25mm wide and 12.5mm deep and up to
5m long before joiners are required. Corner joining to any required angle is available by
specification.
The channel has been designed to provide exceptional heat sinking to support LED ribbon of up
to 28W/m and can be fitted with diffusers of Opal, Linear Prismatic and Clear.
EEKO-Line & D-LUX-Line is available in three standard colours of White, Silver and Black and
also Raw Clear Coat. Custom colours can be provided on request.
All EEKO-Line & D-LUX-Line products are manufactured to precise as ordered measurements
and are ready for easy installation.
To order or request a quote please use the form at the back of this booklet or contact
the design team at Lighting Worxs directly.
EEKO-Line: EZE 1.1
Single line continuous LED. Recessed or surface mounted. For a recessed
flanged version refer to EEKO-Line EKA1 and EKA2.
EEKO-Line: EZE 1.2
Double line continuous LED. Surface mounted. Width is variable from
44mm to 88mm.
EEKO-Line: EZE 1.3
Triple line continuous LED. Surface mounted. Width is variable from
66mm to 110mm.
EEKO-Line: Pro
Single line continuous LED lighting. Pro is designed for recessed flush
mounting to plaster board providing a perfect integrated finish with the
surface.
EEKO-Line: Multi Pro
Multi line continuous LED. Multi Pro is designed for flush mounting to
plaster boards to give an eye catching integrated finish with the surface.
Multi Pro units are easy to install with their interconnecting fixing plates
which also maintain perfect parallel form during installation.
LIGHTING WORXS
EEKO-Line & D-LUX-Line
EEKO-Line: Slide 1.1
Single line wall mounted LED luminaire. Direct or Indirect light output.
Mounting plate is continuous for easy fixing to a surface.
OR
EEKO-Line: Slide 1.2
Double line wall mounted LED fitting. Direct or Indirect or Direct/Indirect
light output. Can also be configured as one up and one down. Mounting
plate is continuous for easy fixing to the wall surface.
OR
EEKO-Line: Slide 1.3
Triple line wall mounted LED. Direct or indirect light output. Can also be
configured as two up or down. Mounting plate is continuous for easy
fixing to the wall surface.
EEKO-Line: Slide 2.2
Dual line direct and indirect continuous LED. Mounting plate is
continuous for ease of mounting to a wall or other surface.
EEKO-Line: Slide 2.3
Triple line continuous LED. Two up or down and one opposing. Mounting
plate is continuous for ease of mounting to a wall or other surface.
EEKO-Line: Slide 2.4
Quad line continuous LED lighting. Three up or down and one opposing.
Mounting plate is continuous for ease of mounting to a wall or other
surface.
LIGHTING WORXS
OR
EEKO-Line & D-LUX-Line
D-LUX-Line: Float 1.2
Suspended or Surface Mount Twin line continuous LED luminaire. The
suspended module can be Direct/ Indirect or solely direct. The Power
Supply is concealed within the ceiling space. The surface mount option
requires the power supply to be located elsewhere.
D-LUX-Line: Float 1.3
Suspended or Surface Mount Triple line continuous LED luminaire. The
suspended module can be Direct/ Indirect, solely direct or other
combinations. The Power Supply is concealed within the ceiling space.
The surface mount option requires the power supply to be located
elsewhere.
D-LUX-Line: Float 3.3
Suspended Triple line continuous LED. Three lines of direct lighting and
two lines of indirect. A flush plate is available for concealing the power
supply within the ceiling cavity.
D-LUX-Line: Flex
Flex is an aluminium LED mounting extrusion with the
capability to smoothly follow curves on vertical surfaces.
Using D-LUX Flex assures that the LED’s are provided
with the required heat sinking for long life and
performance.
LIGHTING WORXS
EEKO-Line EK Series
Walk & Drive-Over EEKO-Line EKFS & EKFD
EKFS and EKFD have been designed especially for recessing in to walk ways and floors in both
interior and exterior locations.
Structure:
Diffuser:
Lengths:
Endcaps:
Max Wattage:
Anodized Extruded Aluminium with Metal mounting clips
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
EKFS-9.6W/m, EKFD-14.4W/m. Both are also RGB capable.
EKFS
8.5
19.2
EKFD
26
22.5
22
6
14
EEKO-Line: EKA1
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Glue, Dbl Sided Tape or Screw
9.6W/m
EEKO-Line: EKA2
11
18.5
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting Clips:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Yes- Metal
14.4W/m
EEKO-Line: EKC
18.5
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting Clips:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Yes- Metal
14.4W/m
EEKO-Line: EKD1
16
LIGHTING WORXS
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting Clips:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Yes- Metal
14.4W/m
EEKO-Line EK Series
EEKO-Line: EKD2
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Metal Clips or Double Sided Tape
14.4W/m
16
EEKO-Line: EKE1
Structure:
Diffuser:
Lengths:
Endcaps:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
28.8W/m
19.5
13.2
EEKO-Line: EKE2
Structure:
Diffuser:
Lengths:
Endcaps:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
28.8W/m
Mounting Clip
EEKO-Line: -EKSTEP
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
59.2
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Screw
14.4W/m
21.7
EEKO-Line: EKFLOOR
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
52
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Clips or through screw
14.4W/m
21.7
17.4
EEKO-Line: EKSHELF
Structure:
Diffuser:
Lengths:
Endcaps:
Max Wattage:
7.95
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
14.4W/m
70.2
EEKO-Line: EKF1
Structure:
Diffuser:
Lengths:
Endcaps:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
14.4W/m
20.5
LIGHTING WORXS
EEKO-Line EK Series
70.1
EEKO-Line: EKF2
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
29.1
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
Yes- Plastic
Spring Clips
14.4W/m
EEKO-Line: EKRAIL
45
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
1m / 1.5m / 2m / 3m
No
Screws
14.4W/m
EKRAIL is the perfect way to brighten up walls or add
better illumination to under lit areas.
34.5
EKG1
EEKO-Line: EKG1 & EKG2
19.9
11.9
Structure:
Diffuser:
Lengths:
Endcaps:
Mounting:
Max Wattage:
Anodized Extruded Aluminium
Opal, Frosted or Clear
Up to 3m
Yes- Plastic
Screw or Double-Sided Tape
28.8W/m
EEKO-Line: EKG1 & EKG2 are available in standard sizes to directly replace
EKG2
fluorescent battens for cupboards, pantries, wardrobes etc. Each comes complete
with LED (14.4W/m) Cool or Warm White fitted, wiring tails, end caps and power supply.
Code:
EKG1.600 / EKG2.600
EKG1.900 / EKG2.900
EKG1.1200 / EKG2.1200
EKG1.1500 / EKG2.1500
Description:
LED Batten, 600mm long, Total Watts=8.6
LED Batten, 900mm long, Total Watts=12.9
LED Batten, 1200mm long, Total Watts=17.2
LED Batten, 1500mm long, Total Watts=21.6
EEKO-Line: EKSWITCH
Unit Width:
Voltage:
Function:
Current:
Load:
12mm
12V-24V
OFF/ON, Dimming 25%, 50%, 75%
Max 5 Amps
60W (12V), 120W (24V)
EEKO-Line: EKSENS
Unit Width:
10mm
Voltage:
12V-24V
Function:
Motion Sensor
Current:
Max 10 Amps
Detection Range: 2 Metres
Delay Time:
40 Seconds
LIGHTING WORXS
D-LUX Major
NEW
D-LUX Major: A VERSATILE HIGH PERFORMING LUMINAIRE.
D-LUX Major is designed to be adaptable so as to meet the needs of modern commercial lighting requirements.
25mm
40mm
Slotted brackets for precise
locating and adjustment
The D-LUX Major profile is manufactured from New Zealand high grade aluminium and of a weight which will
provide excellent thermal management for a wide range of LED light sources.
Tridonic-Stark Light Engines





High Output Double Copper
Circuit Board
Luminous flux range from 1,140 – 1,440 lm per 280mm
LED system solution with outstanding system efficiency up to 112 lm/W
Colour temperatures 2,700, 3,000, 4,000 and 5,000 K
Long life-time: 50,000 hours
5-year guarantee





High performing LED ribbon
Power output per meter from 4.8 – 56W
LED system efficiency of up to 75lm/W
Colour temperatures Warm White/ Cool
White or Colour temperature controllable
3-Year guarantee
D-LUX Major 2.2
Wall mounted luminaire used to provide additional general lighting. Ideal for corridors
and inner floor plate walls.
The D-Lux Major can be configured to meet most lighting requirements and when
necessary the control gear can be mounted in the D-LUX Major 2.2 upper chamber or
the control gear can be located remotely. Maximum lengths 5m before joiners are
required.
D-LUX Major 2.1
The 2.1 can be wall mounted to provide either direct or indirect lighting. Ideal for wall
washing or throwing light on a ceiling.
For a continuous line of light the control gear must be located remotely. When breaks
in the lighting line can be permitted then the control gear can be situated within the
D-Lux Major extrusion. Maximum lengths 5m before joiners are required.
D-LUX Major 2.2SP
A suspended LED luminaire with minimal appearance but high performance. Single runs
of up to 5m before joiners are required. Control gear is housed within the top cavity
behind servicing plates.
The D-LUX Major lighting system is designed to be fitted with diffuser of either Opal, Y5
or Clear Acrylic lens. When non-SELV Light Engines are fitted then access to the boards
is prevented without the use of a tool.
LIGHTING WORXS
Omni-LINE
Soon to be released
Omni-LINE is simplicity of form
with performance, reliability
and efficiency at its core
A major benefit of Omni-LINE systems is they are
delivered ready to be installed.
There is no need to dismantle an Omni-Line luminaire
for installation. This saves time and eliminates risks of
damage to Light Engines, connectors and optical
components.
For ceiling and wall mountings Omni-LINE fixes easily and quickly using its unique ‘Quick
Rail’ mounting system. This makes for a trouble free installation and gives an
immaculate finish with perfect alignment.
The Omni-LINE has an outward appearance of simplicity; however the main system
structure is formed from 6 interconnecting elements and therefore complex internally.
Quick Rail
Dual internal carriageways are provided for both its own power and other control lines.
These carriageways also provide easy incorporation of emergency lighting and can be
used for data cable conduits.
Omni-LINE systems are complimented with the latest LED technology providing
dimming (0-10V, DSI, DALI, SwitchDIM), CORRIDOR and Daylight Controls.
The modular internal structure of Omni-LINE has been created deliberately to allow for
technology upgrading as improved LED Light Engines and control systems become
available.
Integrated Elements
Omni-Line’s 3 heat transfer systems: Conductive, Radiant and Convection
The entire Omni-LINE range combines “Kiwi” innovation of design and breakthrough
construction methods with the world’s best LED technology. Omni-LINE is engineered
to provide unparalleled performance, reliability and efficiency.
Triple Thermal System
LIGHTING WORXS
A critical design objective of the Omni-LINE system was to provide an exceptional level
of “Thermal Performance” to provide the LED light engines with an optimal
environment to operate in. This has been achieved using advanced thermal dynamic
design and manufacturing techniques to create a heat transfer system which allows the
lighting system to give the best long term performance possible.
Soon to be released
Omni-LINE
Installation Mounting Options
Suspended
Recessed
Surface (Quick Rail)
Wall Rail (Quick Rail)
Variable Luminaire Width
Minimum 60mm
Maximum 280mm
60mm
80mm
120mm
Single LED line only
Single LED line only
Single or Double LED line
Variable width options are allowable within the range
of 60mm – 280mm. Where photometric data is
required for other than standard width options then a
fee may be applied.
Height 80mm
Omni-LINE is available in three standard widths of:
Control Gear & Light Engines
LED technology is taking lighting in completely new directions and we believe that choosing the best control gear and light
engines is a principal requirement in providing LED illumination solutions.
This is why Omni-Line is only fitted with Tridonic control gear and Tridonic LED boards. Tridonic offer complete packages of
solutions that fit perfectly within Omni-Line’s design parameters.
TALEXXmodule STARK LLE










Combined LED module for general and emergency lighting
Integrated separate emergency LEDs (2 or 4 W version)
Efficiency of the module up to 123 lm/W
High colour rendering index CRI > 80
Small colour tolerance MacAdam 3
Small luminous flux tolerances
Colour temperatures 3,000 and 4,000 K
Perfectly uniform light,
Long life-time: 50,000 hours
5-year guarantee
LIGHTING WORXS
LED and Diffuser Options: EEKO-Line & D-LUX
The EEKO-Line & D-LUX light source is nothing less than very high quality LED’s.
We have been working alongside our overseas manufacturer for over 8 years insuring a high level of excellence in SMD chip
properties, circuitry, performance and reliability.
Our SMD strips are available in numerous options of Light Output, Colour Temperatures, Wattages and Voltages.
When choosing from the different LED options consideration must be given to the intended use. Generally you would use
mid-range light output for under bench lighting and mainly lower wattages for washing a vertical surface as a feature.
When the distance from the power supply to the LED strip is more than 20m then 24V strip should be used to avoid voltage
drop.
For advice on your lighting requirements contact the Design Team at Lighting Worxs.
EEKO-Line & D-LUX LED Strip Options
Code
Watts/m
Voltage
LED’s/m
Lm/m
Colour Temp.
IP
213.4.12V.WW
213.4..12V.CW
213.4.12V.CW.IP67
213.4.12V.BLUE.IP67
4.8
4.8
4.8
4.8
12/24
12/24
12/24
12
60
60
60
60
335
360
335
360
Warm White
Cool White
Cool White
Blue/Red/Green/Amber
20
20
67
67
213.7.12V.WW
213.7.12V.CW
7.2
7.2
12
12
30
30
505
540
Warm White
Cool White
20
20
213.9.12V.WW
213.9.24V.WW
213.9.12V.CW
213.9.24V.CW
213.9.12V.WW.IP67
213.9.24V.WW.IP67
9.6
9.6
9.6
9.6
9.6
9.6
12
24
12
24
12
24
120
120
120
120
120
120
670
670
720
720
670
670
Warm White
Warm White
Cool White
Cool White
Warm White
Warm White
20
20
20
20
67
67
213.14.12.WW
213.14.24V.WW
213.14.12V.CW
213.14.24V.CW
213.14.24V.RGB
14.4
14.4
14.4
14.4
14.4
12
24
12
24
24
60
60
60
60
60
1015
1015
1080
1080
NA
Warm White
Warm White
Cool White
Cool White
RGB
20
20
20
20
20
213.19.24V.WW
213.19.24V.CW
19.2
19.2
24
24
2 x 120
2 x 120
1350
1440
Warm White
Cool White
20
20
213.28.24V.WW
213.28.24V.CW
28.8
28.8
24
24
2 x 60
2 x 60
1800
1920
Warm White
Cool White
20
20
Features:
 Double Copper Circuit Board
 Increased Heat Dissipation
 High Lumens per Watt
 Minimal Voltage Drop
 High chip stability
Diffusers
EEKO-Line & D-LUX can be fitted with a number snap in diffusers options which can never fall out
Double Copper PCB
but can be removed if maintenance is required.
Diffuser options are: Opal, Linear Prismatic and Clear.
LIGHTING WORXS
LED Power Supplies
LED Power Supplies for strip lighting should be selected with allowance for additional load.
LED Power Supplies are either Constant Voltage or Constant Current. Your choice will depend upon the
type of LED being used. All LWX Power Supplies require 230-240V input.
All our power supplies have protection against, overload, short circuit, overheat and have automatic restart.
Adapter Wall Plug Power
Code
LWX3612AD
LWX6012AD
LWX902AD
Watts
36
60
90
Voltage
12
12
24
Amps
3
5
3.75
Watts
12
30
24
60
60
Voltage
12
12
24
12
24
Amps
1
2.5
1
5
2.5
Closed Power
Code
LWX1212P
LWX3012P
LWX2424P
LWX6012P
LWX6024P
Dimensions
76mm x 38mm x 23mm
94mm x 44mm x 23mm
94mm x 44mm x 23mm
114mm x 45mm x 30mm
114mm x 45mm x 30mm
Open Frame Power
Code
LWX12012F
LWX12024F
LWX20012F
LWX20024F
LWX24012F
LWX24024F
Watts
120
120
200
200
240
240
Voltage
12
24
12
24
12
24
Amps
10
5
16.66
8.33
20
10
Dimensions
200mm x 100mm x 45mm
200mm x 100mm x 45mm
200mm x 100mm x 45mm
200mm x 100mm x 45mm
200mm x 100mm x 45mm
200mm x 100mm x 45mm
Fan Cooled Power
Code
LWX48012C
LWX48024C
LWX60012C
LWX60024C
Watts
480
480
600
600
Voltage
12
24
12
24
Amps
40
20
50
25
Watts
20
30
60
80
100
150
200
250
Voltage
12
12 or 24
24
12
12 or 24
12 or 24
12 or 24
12 or 24
Amps
1.67
2.5
2.5
6.67
8.33/4.17
12.5/6.25
16.67
20.8
Dimensions
Fan Cooled- 250mm x 150mm x 80mm
Fan Cooled- 240mm x 125mm x 65mm
Fan Cooled - 265mm x 112mm x 60mm
Fan Cooled - 265mm x 112mm x 60mm
Waterproof Power
Code
LWX2012IP
LWX3012/24IP
LWX6024IP
LWX8012IP
LWX10012/24IP
LWX15012/24IP
LWX20012/24IP
LWX25012/24IP
Dimensions
185mm x 30mm x 20mm
220mm x 30mm x 20mm
210mm x 35mm x 25mm
180mm x 70mm x 40mm
210mm x 70mm x 40mm
240mm x 68mm x 43mm
240mm x 125mm x 55mm
240mm x 125mm x 55mm
LIGHTING WORXS
LED Controllers
LED Repeaters: 1 & 3 Channel
Input Signal:
Input Voltage:
Max Load Current:
Max Output Power:
Dimming Range:
Dimensions:
Code: WRX-CTRREP3
Code: WRX-CTRREP3 (RGB)
Active 0-10V
DC12V - DC24V
10 Amps x 1 Channel. Max 10A
12V-120W/24V-240W
0-100%
121mm x 39mm x 39mm
Active 0-10V
DC12V or DC24V
5 Amp x 3 Channels. Max 15A
12V-180W/24V-360W
0-100%
121mm x 39mm x 39mm
LED Repeater 3 Channels RGB
Code: WRX-CTRREP4
Input Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
PMW
DC12V or DC24V
8 Amp x 3 Channels. Max 24A
12V-288W/24V-576W
148mm x 87mm x 23mm
LED RGB Controller and DMX (512) Decoder
Code:
WRX-DMXCON2
Input Voltage
Max Load Current
Dimming:
Max Output Power
Dimension
Constant DC12V or DC24V
5A-12V/2.5A-24V DC, 12 Channels
Up to 12 Channels
12V-288W/24V-576W
189mm x 114mm x 38mm
DMX (512) Decoder
Code:
WRX-DMXDEC1
Input Voltage
DMX Channels
Output
Max Output Power
Dimension
12V or 24V DC
3 Channels
Up to 12 Channels
12V-144W/24V-288W
165mm x 68mm x 40mm
DMX (512) Remote Control Decoder
Code:
WRX-DMXDECRE
Input Voltage
DMX Channels
Output
Max Output Power
Dimension
12V or 24V DC
3 Channels
Up to 12 Channels
12V-144W/24V-288W
165mm x 68mm x 40mm
RF Remote RGB Controller
Code:
WRX-RGBCON2RE
Input Voltage
DMX Channels
Output
Max Output Power
Dimension
12V or 24V DC
3 Channels
Up to 12 Channels
12V-144W/24V-288W
165mm x 68mm x 40mm
The variety of Controllers for LED lighting is extensive and too many to list within these pages. Whether
the requirement is for Remote Control, Dali, Digital, Analogue, WiFi or DMX we have solutions. For your
particular requirements we are happy to assist in your system design and component choice.
LIGHTING WORXS
LED Controllers
Key Ring Remote Controllable Dimmer
Code:
WRX-RFREM1
Wireless Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
RF 334Khz Globally Unique Code
DC12V
8 Amp Single Outputs. Max 24A
96W
110mm x 56mm x 34mm
RF Remote Controllable Dimmer
Code:
WRX-RFREM3
Wireless Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
RF
DC12V or DC24V
8 Amp x 3 Channels. Max 24A
12V-288W/24V-576W
91mm x 70mm x 24mm
RF Remote Colour Temp. Controller
Code:
WRX-RFCCTREM4
Wireless Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
RF 2.4Ghz
DC5V to DC24V
8 Amp x 2 Channels. Max 16A
12V-192W/24V-384W
120mm x 62mm x 24mm
RF 8 Zone Remote Colour Temp. Controller
X8
Code:
WRX-RFCCTREM5
Wireless Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
RF 2.4Ghz
DC5V to DC24V
5 Amp x 2 Channels X 8 Zones (8 Receivers)
12V-192W/24V-384W
175mm x 44mm x 30mm (Receiver)
X1
Inline Mini Controllers
Code:
WRX-MINDIM
WRX-MINIRGB
Function
Input Voltage
Max Load Current
Max Output Power
Dimension:
Touch Dim 8 levels
12V
12 Amp
144W
42mm x 12mm x 3mm
Touch RGB Control
12V
6 Amp
72W
40mm x 13mm x 4mm
Code:
WRX-RFREM3
Wireless Signal
Input Voltage
Max Load Current
Max Output Power
Dimension:
RF 2.4Ghz
DC12V or DC24V
8 Amp x 3 Channels. Max 24A
12V-288W/24V-576W
91mm x 70mm x 24mm
MINIRGB
MINIDIM
Lighting Worxs has extensive experience in LED control systems and best practice configuration
expertise insuring that your LED lighting installation is trouble free.
LIGHTING WORXS
Project Pictures
Integrated
Motion Sensor
LIGHTING WORXS
Project Pictures
LIGHTING WORXS
Project Pictures
LIGHTING WORXS
Lighting Worxs: Wiring Plans
We have extensive experience in
designing & supplying LED lighting
installations.
When a project necessitates we
provide CAD drawings to ensure
that the installation process is as
simple as possible and fault free.
LED illumination can be used as a
main light source for a space or
just for decorative effects.
Whatever the purpose, correct
system design and installation is of
paramount importance to achieve
the benefits LED lighting can bring
to a space.
LIGHTING WORXS
WORXS
LIGHTING
LIGHTING WORXS LTD
SPECIFICATION & DESIGN CENTRE
L2-126 Cuba Street
Wellington
Ph: 04 385 1110
Fax: 04 385 1102
Email: [email protected]
www.lightingworxs.co.nz
MANUFACTURING DIVISION
9A Oxford Terrace
Mount Cook
Wellington, 6021
Ph: 021 615 875
Email:
[email protected]