Download MQ 90S

MQ 90S
BAND PASS SUBWOOFER
DESCRIPTION
The MQ 90S subwoofer is innovative and compact.Unlike competing models,
that require all of the satellite speakers to be wired directly to the subwoofer,
the MQ 90S can be parallel wired anywhere along the constant voltage wire
pair.
The high power transducer is a unique 8” woofer design that achieves truly
impressive performance for its size when matched with the special bandpass
and enclosure design of the MQ 90S.
It includes a transformer inside for the connection to (100 – 70 V) constant
voltage lines, yet it can also be set to 16 Ω (low impedance connection).
When connected to a 100 V line, its power can be selected among the values
60-30-15-7.5 W through a rotary switch (thanks to internal transformer taps).
The cabinet material is
MQ 90S is available in white (MQ 90S-W) or black (MQ 90S-B) colour
MAIN FEATURES
•
•
•
•
•
•
•
•
•
•
•
MAIN APPLICATIONS
•
•
•
•
•
•
•
Music applications
Audio visual applications
Shopping malls
Restaurants
Pubs
Hotels
Office building
SPECIFICATIONS
Loudspeaker
Power (on 8 Ohm load)
Power
Sensivity
Mx. SPL (6 W / 1 m)
Frequency Response (± 10 dB)
Angle of coverage
Connector
Body colour
Main body material
Cover material
Dimensiones (HxWxD)
Installation
Use
Net weight
Operating temperature
Relative humidity
8” band pass subwoofer
60 / 120 W (RMS / Music power)
60 W - 30 W - 15 W – 7.5 W (100V)
89 dB (1 W / 1 m)
107 dB(A) (1 m / POWER MAX)
70 Hz – 200 Hz
360°
Euroblock 4 pole
White / Black
High-density MDF
PVC with scratch resistant surface
300 mm x 203 mm x 400 mm
On ground
Indoor
8 kg
-25° to +55°
90% non condensing
Band pass 8” subwoofer
60 / 120 Watt (RMS/Music Power)
70 Hz ÷ 220 Hz
107 dB (1 m / POWER MAX) max. SPL
Incl. 100V transformer multitap
Power rotary switch
Filter frequency: 200 Hz
Type of filter 12 dB/oct
Direct connection to Low-Z speaker lines
Easy to install
Simple power settings
MQ 90S
Response
110
100
dB SPL
90
80
70
60
20
100
MQ90S
1/3 Octave Polars
1000
Frequency (Hz)
10000
0°
100
80
330°
30°
300°
270°
0
60°
-6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
240°
0
120°
150°
210°
180°
90°
MR
55 NUMBERS
- 36
PART
1.0-J-E
MQ 90S
POWER SELECTION
13000098 - MQ 90S-W White
13000097 - MQ 90S-B Black
Set the rotary switch to selected the chosen power value referring
to the 100 V line (among 7.5 W – 15 W – 30 W – 60 W) so the
correspondence impedance (among 1333 Ω – 666 Ω – 333 Ω –
166 Ω) or to the 16 Ω position (for low impedance connection).
270
DimensionS (All data are in mm)
187
172
MQ 90 - 39
300
400
205
MQ 50 - 42
Note: if the rotary switch is set to
the OFF position, the loudspeaker
will be muted.
175
245
SCHEMATICS
60 W
+
30 W
16 Ohm
15 W
7.5 W
-
0
165
WOOFER 16 Ohm
MQ 50I - 45
30 W
60 W
CE comply with European Community Directive 73/23/EEC and 93768/EEC
Self-Extinguishing plastic according to UL 94V0
Environmental protection IP 40 homologation
Speaker data according to IEC 268-5
Safety according to IEC EN 60065:2002
ACCESSORIES (included)
27
7.5 W
15 W
CERTIFICATIONS AND APPROVALS
•
•
•
•
•
• Connection Terminal 4 pole
163
C
A
228
268
+
INSTALLATION NOTES
+
INPUT
88
-
-
195
Installation of the MQ 90S should be put on the floor of a room where
“satellite” loudspeakers (for mid / high frequencies) are already present. MQ
90S belongs to RCF Monitor Q series.
It is for indoor use only (avoid to use it in very humid places).
The power can be easily selected by using the Rotary switch present on the
front panel; the knob is accessible using screwdriver.
Connections to the loudspeaker line are made by using Euroblock connector.
The enclosure is constructed in MDF with a scratch resistant surface
RCF products are continually improved. All specifications are therefore subject to change without notice.
www.rcf.it