Download Galaxy Touchless Automatic Hand Dryer Engineering Specification

ENGINEERING SPECIFICATION SHEET
Simply the Best
Galaxy™ Hand Dryers - Touchless Automatic
Features
› Ultra quiet hand dryer at 53 dB(a)
› Advanced touchless technology turns unit
on and off as hands are sensed
› Unit is not programmed to run for a predetermined time
› Rugged construction
› Contemporary design
› Fast drying
› Five-year warranty
› Trouble free operation
› Easy installation
Applications
Ideal for:
› Restaurants
› Office buildings
› Banks
› Hospitals
› Athletic stadiums
› Malls
› Department stores
› Gas stations
› Prisons
› Hotels
› Schools
› Airports
› Professional offices
Model
Galaxy™ 1
Galaxy™ 2
Galaxy™ M 1
Galaxy™ M 2
Item number
073009
073010
*
073724__
*
073725__
Phase
Single
Single
Single
Single
Single
Single
Voltage
120 V
240 V
208 V
120 V
240 V
208 V
Wattage
1850 W
2000 W 1500 W
1850 W
2000 W 1500 W
Amperage
15.42 A
8.34 A
15.42 A
8.34 A
Min. required breaker size
20 A
15 A
20 A
15 A
Min. required wire size
12 AWG
12 AWG
12 AWG
12 AWG
Degree of protection (IP)
IP 23
IP 23
IP 23
IP 23
Sound power level
53 dB(a)
53 dB(a)
53 dB(a)
53 dB(a)
Air speed
NA
NA
NA
NA
Air volume
90.0 CFM
95.0 CFM
90.0 CFM
95.0 CFM
Drying time (approx.)
30 sec.
30 sec.
30 sec.
30 sec.
Height
9.88" / 250 mm
9.88" / 26 mm
10.5" / 266 mm
10.5" / 266 mm
Width
6.88" / 175 mm
6.88" / 175 mm
6.88" / 175 mm
6.88" / 175 mm
Depth
9.06" / 230 mm
9.06" / 230 mm
9.06" / 230 mm
9.06" / 230 mm
Weight
5.5 lb / 2.5 kg
5.5 lb / 2.5 kg
8.8 lb / 4.0 kg
8.8 lb / 4.0 kg
Color
Alpine white
Alpine white
Alpine white
Alpine white
Charcoal Gray (opt.) Charcoal Gray (opt.)
Silver Metallic (opt.) Silver Metallic (opt.)
Housing
ABS polycarbonate ABS polycarbonate Cast aluminum
7.21 A
7.21 A
Certified to
ANSI/UL Std. 499
Conforms to
CAN/CSA
Std. 22.2 No. 36
Cast aluminum
* Insert "S" for Silver Metallic / "G" for Charcoal Gray / Leave blank for Alpine White
17 West St., W. Hatfield, MA 01088 | 800.582.8423 | 413.247.3380 | fax 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
rev. 2014.1 | Due to our continuous process of engineering and technological advancement, specifications may change without notice.
Models & Specifications
des.
s own Dimensions & Colors
the appropriate
Galaxy™
le pole circuit
Alpine
V requires a
20White
pper wire. The
uires a 15 amp
wire.
6 7/8" 175 mm
LIMITED WARRANTY
Galaxy™ M
STIEBEL ELTRON, Inc. warrants to the original owner that the GALAXYTM hand dryer will be free from
defects in workmanship and materials for a period of FIVE YEARS from the date of purchase. Should
any part(s) prove to be defective under normal use during this period, STIEBEL ELTRON, Inc. will be
responsible for replacement
of the
defective part(s)
only.Metallic
Damage to the housing
due to
abuse
is not
Charcoal
Gray
Metallic
Alpine
White
Silver
covered by this warranty. STIEBEL ELTRON, Inc. is not responsible for labor charges to remove and/or
replace the defective part(s), or any incidental or consequential expenses. Should the owner wish to
return the entire unit for repair, the owner must first secure written authorization from STIEBEL ELTRON, Inc.
The owner shall be required to show proof of purchase date by including a copy of the original
invoice, and to pay all transportation costs to return defective part(s) or hand dryer for repair or
replacement.
imately 48" above
rpendicular wall.
IF YOU NEED TO RETURN A PART OR A HAND DRYER UNDER WARRANTY, PLEASE CALL US FIRST TO
OBTAIN SHIPPING INSTRUCTIONS. REMEMBER TO SEND A COPY OF THE INVOICE WITH YOUR RETURNED
PART.
FIG. 2
STIEBEL ELTRON, Inc.
17 West Street
West Hatfield, MA 01088
Phone: 800-582-8423
e wall by using the
ting holes.
et grill and the
6 7/8" 175 mm
Operating Instructions
min. 4" 10 cm
for the user
In order to dry your hands most efficiently, please use the
following procedure:
part of housing
the slots on the
must be
ower housing with
The sensor is the black rectangle located underneath the unit
between the air exit and air inlet grills. The sensor switch will not
work properly if it has been covered by gum or dirt. If the sensor
is obstructed, the hand dryer will switch off automatically to
prevent it from running continuously. Should the unit overheat,
a safety high-limit switch will turn off the heating element. The
safety high-limit switch resets automatically once the heating
element has had a chance to cool down.
Normal Care
To clean the case use a soft cloth with a mild detergent if
necessary. Never use any abrasive cleaners since they will
scratch the finish of the unit. Never spray water or cleaning
fluids directly on hand dryer. While cleaning the unit, make sure
the electric eye switch is not covered. THE GALAXYTM HAND
DRYER DOES NOT CONTAIN ANY PARTS SERVICEABLE BY THE LAY
PERSON. IN CASE OF MALFUNTION PLEASE CONTACT A LICENSED
ELECTRICIAN.
9 1/16" 230 mm
FIG. 3
9 7/8" 250 mm
ANCE, FAILURE TO
N SERIOUS
INJURY
Specification
FIG. 1
Galaxy™ 1 & 2 hand dryers shall be manufactured by Stiebel Eltron, Inc. to include a cover of ABS polycarbonate designed for light to
6 7/8" 175 mm
bolt and
reinstall
medium
traffic areas. Motor shall be thermally protected brush type with a single shaft. Dryer shall deliver 90 cubic feet per minute
208—240V/60Hz
er.
of air volume and shall be activated by an infrared sensor
automatically detecting hands when LN/L
present. Hand dryer shall be listed under
110—120V/60Hz
of ETL as conforming to ANSI/UL Std. 499 and certified to CAN/CSA Std. 22.2 No. 36.
GRD
1
1 Fan Motor
Galaxy™ M1 & M2 hand dryers shall2beHeating
manufactured
by Stiebel Eltron, Inc. to include a cover of cast aluminum designed for high traffic
Element
N/L L
GRD
areas. Motor shall be thermally protected
brush
type
with a single shaft. Dryer shall deliver 95 cubic feet per minute of air volume
3 Sensor
and shall be activated by an infrared sensor automatically detecting hands when present. Hand dryer shall be listed under of ETL as
conforming to ANSI/UL Std. 499 and certified to CAN/CSA Std. 22.2 No. 36.
ts, motor 50 W)
1M
~
Engineer/Architect
ts
9 1/16" 230 mm
ts, motor 50 W)
FIG. 3
Job Name/Customer
ts
ts, motor
50 W)
Contractor
_________________________________________________________________________________________________________________________________________________________________________________________________
Date __________________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________________________________________________
Location ______________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________________________________________________________________________________________
Representative ___________________________________________________________________________________________________________________________
e unit without
shipping
Qty
208—240V/60Hz
110—120V/60Hz
™
Galaxy model ________________________________________________________________ Motor
ng Element
or
1
L
N/L
______________________________
GRD
2
3
kW VoltageAmps
_____________________________
_____________________________
_____________________________
17 West St., W. Hatfield, MA 01088 | 800.582.8423 | 413.247.3380 | fax 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
GRD
N/L L
rev. 2014.1 | Due to our continuous process of engineering and technological advancement, specifications may change without notice.
n clamp down on
wall.
Your hands will be dry within 25 - 35 seconds.
The STIEBEL ELTRON GALAXYTM series hand dryers are equipped
with an infrared sensor switch. This sensor will activate the unit
when hands are placed underneath it. Approximately 7
seconds after the hands have been removed, the unit will
automatically shut off.
48" 120 cm
e back part of
ring block.
9 7/8" 250 mm
6 7/8" 175 mm
• shake off excess water over the wash basin
• place hands underneath the unit at a distance of 4" - 7"
• rub your hands together as if you were washing them