Download i-class Induction Heating

i-class
Induction Heating
COBES GmbH proudly presents the new series of Induction Heating Power
Supplies. .
The series covers a power range up to 3 kW with two units of 1.5 kW and 3 kW.
Each power level is available in two versions: 45 Vrms and 90 Vrms output voltage.
These allow usage of low (1-3 turn coils) and high (4 and more turn coils)
impedances for most applications.
19"-Power Supply
The power supply housing is an air cooled 19”- unit for easy installation in 19”racks. It is also available in a tight cabinet (with air or water cooling) for difficult
industrial environments.
The large, background light LCD-Display shows all data and parameters, an easy to
follow menu structure allows the setting of interfaces, set point, maximum values,
9 timers with 16 steps each and an energy controller.
3 controllers for voltage, current and power are ideal for different applications and
protection of your workpiece .
The power supply can be run at mains voltage of 187 – 265 V (50/60 Hz), single
phase.
COBES GMBH
C.-D.-MAGIRUS-STRASSE 1, D-79367 WEISWEIL
TELEFON + 49 (0) 7646/91 53 9-0
TELEFAX+ 49 (0) 7646/91 53 9-59
E-MAIL [email protected]
INTERNET http://www.cobes.de
GESCHÄFTSFÜHRER
DIPL.-ING. CAY-OLIVER BARTSCH
DIPL.-ING. MATTHIAS STADELMAIER
REGISTERGERICHT EMMENDINGEN HRB 530 K
UST.-ID DE 812 311 306
BANKVERBINDUNG
SPARKASSE FREIBURG-NÖRDLICHER BREISGAU
BLZ 680 501 01, KTO 22 11 55 88
i-class
Induction Heating
The power supply provides 4 interfaces:
•
•
•
•
•
The "Quick-Set-Up-Interface " with an Emergency-OFF-Interlock, PowerON (switch or key/wiper) und Set-Point via external potentiometer
Manual via front panel (only jumper on Emergency-OFF-Interlock)
25-pin. Sub-D-connector with main analog and digital signals
And a 9-pin.-Sub-D-Interface to load up new Firmware.
Optional an additional Interface (also after installation) can be installed.
These interface-cards are available as Profibus, Interbus-S, DeviceNet,
RS 232/485 and others.
In the separate, water cooled tank circuit one or two capacitors can be installed.
These capacitors are available in fine steps which allow to match a wide range of
workpieces and materials to the system.
The frequency range is 50 – 500 kHz.
The tank circuit is connected to the power supply with
rigid industrial connectors type Harting (standard 3 m,
longer cables on request).
The tank circuit got temperature- and water flowswitches as well as short circuit and frequency
monitoring.
The induction coils (Inductors) are connected to the tank
circuit with a combined screw locked connector for water
and current. Through a separate lid the capacitors can be
exchanged easily.
The small size of (L x W x H) 300 x 200 x 150 mm allows
installation in or close to the system/maschine.
Tank circuit 1,5 und 3 kW
Did we get you curious?
Than please check the following data sheet or call
++ 49 7646 91539-0
Or use our address data below.
We are waiting for your request!
COBES GMBH
C.-D.-MAGIRUS-STRASSE 1, D-79367 WEISWEIL
TELEFON + 49 (0) 7646/91 53 9-0
TELEFAX+ 49 (0) 7646/91 53 9-59
E-MAIL [email protected]
INTERNET http://www.cobes.de
GESCHÄFTSFÜHRER
DIPL.-ING. CAY-OLIVER BARTSCH
DIPL.-ING. MATTHIAS STADELMAIER
REGISTERGERICHT EMMENDINGEN HRB 530 K
UST.-ID DE 812 311 306
BANKVERBINDUNG
SPARKASSE FREIBURG-NÖRDLICHER BREISGAU
BLZ 680 501 01, KTO 22 11 55 88
i-class
Induction Heating
Ordering Data
Manufacturer
COBES
Price
Term
Induction Heating PS
Manufacturing Number
126 0001
126 0002
1,5 kW
3,0 kW
Value/Number
Unit
240 x 64
Pixel
19“ / 3 HE / 500
550 over all.
300 / 200 / 150
mm
mm
mm
Technical Data
Pos
Item
Discribtion :
Induction Heating Generator with
parallel tank circuit
1 x Power supply (1,5 / 3 kW), PS
Push/pull oscillator, TC
µ-controller with LCD Graphic (blue)
Controllers: U / I / P
Max. values settable (non fugitive)
Set point value analog (0 – 10V)
Dimensionens PS
(W x H x D)
Abmessungen TC
(D x W x H)
1,5 und 3 kW
3 kW
Weight
Power Supply
Tank circuit
Color
Front
Housing
Mains voltage, mains frequency
Mains connector
8,0 kg
2,5 kg
Foil grey/blue
Alu natur
187 – 265
50 /60
PowerCon, Typ A
Remark
3 HU =
132mm
resistive
V
Hz
Output voltage
MF
DC (PS)
Output current (TC)
Output power
Output frequency
Depending on capacitors, standard
Cooling
COBES GMBH
C.-D.-MAGIRUS-STRASSE 1, D-79367 WEISWEIL
TELEFON + 49 (0) 7646/91 53 9-0
TELEFAX+ 49 (0) 7646/91 53 9-59
E-MAIL [email protected]
INTERNET http://www.cobes.de
45 oder 90
60 oder 120
Vrms
V dc
MF
DC
25 / 50 A
/
1,5 / 3
A
DC
50 – 500
350
PS: air
TC: water
kHz
kHz
GESCHÄFTSFÜHRER
DIPL.-ING. CAY-OLIVER BARTSCH
DIPL.-ING. MATTHIAS STADELMAIER
kW
Water cooling
for PS
optional
REGISTERGERICHT EMMENDINGEN HRB 530 K
UST.-ID DE 812 311 306
BANKVERBINDUNG
SPARKASSE FREIBURG-NÖRDLICHER BREISGAU
BLZ 680 501 01, KTO 22 11 55 88
i-class
Induction Heating
Pos
Item
Value/Number
Unit
Remark
Output connectors
DC: cable
Harting connector.
Control cable
Harting connector.
MF: quick disconnect
Power and water
A/D
RS232
Anybus (Option)
Analog 7-pin
3 m,
> lenght
possible
> lenght
possible
Enviromental temperature
5 – 35
°C
Protction class
IP21
Standards
VDE/CE/UL
Marks, Labels
acc. VDE
Connector for induction coil
Interfaces
3m
10V/24V
Potential free
Terminal/
Software
e.g.. Profibus
Packaging/shipping
Single boxes
Foam polster with
Cardboard box, double
wave
1
Units per box
Labels, shipment papers
Accessories:
Water connector parts (unit side), 3 m
hose (8 mm), mains cable (3 m)
Conformity declaration
Manual
All connector parts
9 Timers with each
100 min. 59,9 Sec.
COBES GMBH
C.-D.-MAGIRUS-STRASSE 1, D-79367 WEISWEIL
TELEFON + 49 (0) 7646/91 53 9-0
TELEFAX+ 49 (0) 7646/91 53 9-59
E-MAIL [email protected]
INTERNET http://www.cobes.de
Stck.
GESCHÄFTSFÜHRER
DIPL.-ING. CAY-OLIVER BARTSCH
DIPL.-ING. MATTHIAS STADELMAIER
inclusive
100
msec.
inclusive
REGISTERGERICHT EMMENDINGEN HRB 530 K
UST.-ID DE 812 311 306
BANKVERBINDUNG
SPARKASSE FREIBURG-NÖRDLICHER BREISGAU
BLZ 680 501 01, KTO 22 11 55 88