Download 2B SST C

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

MIMO wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Phone connector (audio) wikipedia , lookup

Public address system wikipedia , lookup

Amplifier wikipedia , lookup

Opto-isolator wikipedia , lookup

Tube sound wikipedia , lookup

Audio power wikipedia , lookup

Transcript
2 B SS T C - S e r i e s
Sonic Excellence, Reliability, and Value
OUR COMMITMENT:
Bryston has a continuing commitment to design and manufacture
the most accurate and reliable audio product available. We
maintain an extensive research and development division which
is constantly looking for methods to improve the performance,
value and reliability of our amplifiers. The Bryston 2B SST stereo
amplifier is the direct result of this continuing quest for perfection.
NEW STANDARDS OF ACCURACY:
FEATURES INCLUDE:
• New cosmetics
• 100 watts per channel 8 ohms, 180 watts 4 ohms, 350
watts bridged 8 ohms
• New SST output devices
• Increase power supply capacitance - 30,000 MFD per
channel
Bryston is pleased to introduce our new Bryston 2B -SST CSeries 100 Watt per channel stereo amplifier. The first 2B
started life way back in 1979 and has become a Classic
among discriminating audiophiles worldwide. This latest
version of our 2B incorporates all the new SST circuitry and
provides twice the power of our original 2B.
• Selectable Balanced or Unbalanced inputs
From input to output, all the circuitry in the 2B SST amplifier has
been optimized for the most accurate performance possible.
The Bryston 2B SST amplifier is a compact, high quality 100
watt per channel, (8 ohms), stereo amplifier intended for use in
home sound systems requiring a musically accurate, extremely
reliable, no compromise power source.
• Quick connect remote 12 volt trigger
While the 2B has for years been thought of as an exceptionally
lucid and transparent amplifier for traditional two - channel
stereo setups, it is now finding additional acceptance in such
installations as multimedia surround-sound systems, and in the
most ambitious music systems with multi- amplified speakers
using electronic crossovers.
• Lower noise and distortion
• Two New Independent ultra-low-noise power transformers
• New computer modeled heat-sink design
• Selectable gain - 1 Volt or 2 Volt
• Available in Silver or black finish with 19 or 17 inch
faceplate
• 20 Year Warranty
2B S S T C - S e r i e s S p e c i f i c a t i o ns
Sonic Excellence, Reliability, and Value
Watts
100 watts per channel, 8 ohms
180 watts per channel, 4 ohms
350 watts, bridged, 8 ohms
Harmonic
distortion
Less than .005% from 20Hz to 20kHz at
100 watts to channel
IM distortion
Less than .005% from 10 milliwatts to 100 watts
Noise
110dB below full output
Crosstalk
Below noise 20Hz to 20kHz at 100 watts
Slewing rate
Greater than 60 volts per microsecond
Features
Bridging switch
Regulated power supplies to all voltage
gain stages
Each channel separated back to the linecord
Tri-colour LED pilot lights for each channel,
indicating green at normal levels, flashing
red at clipping, orane thermal shutdown
Will deliver full output to any phase
angle at 4 ohms or higher
Gold-plated RCA jacks
Balanced or unbalanced input
Dimensions
19 or 17 x 4.75 x 16 inches,
48.26 or 43.18 x 12.1 x 40.64 cm,
wt: 28 lbs, 12.7 kg
Finish
Black or Silver
Power bandwidth .5Hz to over 100kHz
Damping factor
Over 500 at 20 Hz, ref. 8 ohms
Sensitivity Select 29dB 1 volt in = 100 Watts
23dB 2 volt in = 100 Watts
Canada’s largest independent manufacturer of high-end audio electronics
for consumers and professionals. Founded 1962. Visit our website
www.bryston.ca
Bryston Limited P.O. Box 2170, 677 Neal Drive, Peterborough, Ontario Canada K9J 7Y4
1-800-632-8217