* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Audio 217 System Set Up and Maintenance
Survey
Document related concepts
Topology (electrical circuits) wikipedia , lookup
Power electronics wikipedia , lookup
Beam-index tube wikipedia , lookup
Surge protector wikipedia , lookup
Power MOSFET wikipedia , lookup
Operational amplifier wikipedia , lookup
Opto-isolator wikipedia , lookup
Valve RF amplifier wikipedia , lookup
Negative resistance wikipedia , lookup
Rectiverter wikipedia , lookup
Electrical ballast wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Current source wikipedia , lookup
Transcript
A217 Assignment 2 – Electronics I Name: Date: 1. What is meant by direct current as opposed to alternating current? Give an example of each. 2. Give the 3 forms of Ohm’s law relating E, I and R. 3. Why does higher applied voltage with the same resistance result in more current? Draw a graph showing the proportional relationship between E and I. (you do not have to put numerical values on the graph, just label the axes) 4. Why does more resistance with the same applied voltage result in less current? Draw a graph showing the inverse relationship between R and I. (you do not have to put numerical values on the graph, just label the axes) 5. Whith 10 V across 5 ohms resistance, the current I is ______________ 6. When 10 V produces 2.5 A, R is ______________ 7. The resistance of 500,000 ohms is _________M ohms 8. With 10 V across 5000 ohms the current I is __________ mA 9. A vacuum tube has .3 A of current with 6.3 V applied. Draw the schematic showing the tube as a resistance. How much is the resistance of the tube? 10. How much current is needed for a 600 W, 120-V amplifier? 11. How much is the resistance of a 600 W, 120-V amplifier? 12. How much current is needed for a 24-ohm resistor that dissipates 600 W?